[PATCH v8 3/3] iommu/mediatek: Allow page table PA up to 35bit
Yong Wu
yong.wu at mediatek.com
Mon Jun 13 05:04:39 PDT 2022
On Sat, 2022-06-11 at 18:26 +0800, yf.wang at mediatek.com wrote:
> From: Yunfei Wang <yf.wang at mediatek.com>
>
> Single memory zone feature will remove ZONE_DMA32 and ZONE_DMA. So
> add
> the quirk IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT to let level 1 and level
> 2
> pgtable support at most 35bit PA.
>
> Signed-off-by: Ning Li <ning.li at mediatek.com>
> Signed-off-by: Yunfei Wang <yf.wang at mediatek.com>
Reviewed-by: Yong Wu <yong.wu at mediatek.com>
Thanks very much for this function. All the lastest SoCs like
mt8192/mt8195 support this.
> ---
> drivers/iommu/mtk_iommu.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 3d62399e8865..4dbc33758711 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -138,6 +138,7 @@
> /* PM and clock always on. e.g. infra iommu */
> #define PM_CLK_AO BIT(15)
> #define IFA_IOMMU_PCIE_SUPPORT BIT(16)
> +#define PGTABLE_PA_35_EN BIT(17)
>
> #define MTK_IOMMU_HAS_FLAG_MASK(pdata, _x, mask) \
> ((((pdata)->flags) & (mask)) == (_x))
> @@ -240,6 +241,7 @@ struct mtk_iommu_data {
> struct mtk_iommu_domain {
> struct io_pgtable_cfg cfg;
> struct io_pgtable_ops *iop;
> + u32 ttbr;
>
> struct mtk_iommu_bank_data *bank;
> struct iommu_domain domain;
> @@ -596,6 +598,9 @@ static int mtk_iommu_domain_finalise(struct
> mtk_iommu_domain *dom,
> .iommu_dev = data->dev,
> };
>
> + if (MTK_IOMMU_HAS_FLAG(data->plat_data, PGTABLE_PA_35_EN))
> + dom->cfg.quirks |= IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT;
> +
> if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_4GB_MODE))
> dom->cfg.oas = data->enable_4GB ? 33 : 32;
> else
> @@ -684,8 +689,8 @@ static int mtk_iommu_attach_device(struct
> iommu_domain *domain,
> goto err_unlock;
> }
> bank->m4u_dom = dom;
> - writel(dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK,
> - bank->base + REG_MMU_PT_BASE_ADDR);
> + bank->m4u_dom->ttbr = MTK_IOMMU_ADDR(dom-
> >cfg.arm_v7s_cfg.ttbr);
> + writel(bank->m4u_dom->ttbr, data->base +
> REG_MMU_PT_BASE_ADDR);
>
> pm_runtime_put(m4udev);
> }
> @@ -1366,8 +1371,7 @@ static int __maybe_unused
> mtk_iommu_runtime_resume(struct device *dev)
> writel_relaxed(reg->int_control[i], base +
> REG_MMU_INT_CONTROL0);
> writel_relaxed(reg->int_main_control[i], base +
> REG_MMU_INT_MAIN_CONTROL);
> writel_relaxed(reg->ivrp_paddr[i], base +
> REG_MMU_IVRP_PADDR);
> - writel(m4u_dom->cfg.arm_v7s_cfg.ttbr &
> MMU_PT_ADDR_MASK,
> - base + REG_MMU_PT_BASE_ADDR);
> + writel(m4u_dom->ttbr, base + REG_MMU_PT_BASE_ADDR);
> } while (++i < data->plat_data->banks_num);
>
> /*
> @@ -1401,7 +1405,7 @@ static const struct mtk_iommu_plat_data
> mt2712_data = {
> static const struct mtk_iommu_plat_data mt6779_data = {
> .m4u_plat = M4U_MT6779,
> .flags = HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN |
> WR_THROT_EN |
> - MTK_IOMMU_TYPE_MM,
> + MTK_IOMMU_TYPE_MM | PGTABLE_PA_35_EN,
> .inv_sel_reg = REG_MMU_INV_SEL_GEN2,
> .banks_num = 1,
> .banks_enable = {true},
More information about the Linux-mediatek
mailing list