[PATCH v8 2/3] iommu/mediatek: Rename MTK_IOMMU_TLB_ADDR to MTK_IOMMU_ADDR

[Yong Wu]

On Sat, 2022-06-11 at 18:26 +0800, yf.wang at mediatek.com wrote:
> From: Yunfei Wang <yf.wang at mediatek.com>
> 
> Rename MTK_IOMMU_TLB_ADDR to MTK_IOMMU_ADDR, and update
> MTK_IOMMU_ADDR
> definition for better generality.

Comment more about why you need this.

Prepare for supporting TTBR up to 35bit which also need this macro.
Currently it is dma_addr_t while ttbr is phys_addr_t, thus change the
type to "unsigned long long" for generality.

Anyway,

Reviewed-by: Yong Wu <yong.wu at mediatek.com>

> 
> Signed-off-by: Ning Li <ning.li at mediatek.com>
> Signed-off-by: Yunfei Wang <yf.wang at mediatek.com>
> ---
>  drivers/iommu/mtk_iommu.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index bb9dd92c9898..3d62399e8865 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -265,8 +265,8 @@ static const struct iommu_ops mtk_iommu_ops;
>  
>  static int mtk_iommu_hw_init(const struct mtk_iommu_data *data,
> unsigned int bankid);
>  
> -#define MTK_IOMMU_TLB_ADDR(iova) ({					
> \
> -	dma_addr_t _addr = iova;					\
> +#define MTK_IOMMU_ADDR(addr) ({					
> 	\
> +	unsigned long long _addr = addr;				\
>  	((lower_32_bits(_addr) & GENMASK(31, 12)) |
> upper_32_bits(_addr));\
>  })
>  
> @@ -381,8 +381,8 @@ static void
> mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
>  		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
>  			       base + data->plat_data->inv_sel_reg);
>  
> -		writel_relaxed(MTK_IOMMU_TLB_ADDR(iova), base +
> REG_MMU_INVLD_START_A);
> -		writel_relaxed(MTK_IOMMU_TLB_ADDR(iova + size - 1),
> +		writel_relaxed(MTK_IOMMU_ADDR(iova), base +
> REG_MMU_INVLD_START_A);
> +		writel_relaxed(MTK_IOMMU_ADDR(iova + size - 1),
>  			       base + REG_MMU_INVLD_END_A);
>  		writel_relaxed(F_MMU_INV_RANGE, base +
> REG_MMU_INVALIDATE);
>