[PATCH v7 0/2] Introduce MediaTek CCI devfreq driver

Chanwoo Choi cw00.choi at samsung.com
Tue Jun 7 19:00:37 PDT 2022


On 6/7/22 11:05 PM, Johnson Wang wrote:
> The Cache Coherent Interconnect (CCI) is the management of cache
> coherency by hardware. CCI DEVFREQ is DVFS driver for power saving by
> scaling clock frequency and supply voltage of CCI. CCI uses the same
> input clock source and power rail as LITTLE CPUs on Mediatek SoCs.
> 
> This series depends on:
> Chanwoo's repo: kernel/git/chanwoo/linux.git
> branch: devfreq-testing
> [1]: PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
> [2]: PM / devfreq: Add cpu based scaling support to passive governor
> [3]: PM / devfreq: passive: Reduce duplicate code when passive_devfreq case
> [4]: PM / devfreq: passive: Update frequency when start governor
> 
> Changes in v7:
> - remove the 'ret' printing from dev_err_probe().
> 
> Changes in v6:
> - Remove unnecessary "goto" statement.
> 
> Changes in v5:
> - Modify some binding description.
> - Remove pre_voltage member.
> - Not to enable/disable intermediate clock.
> - Not to "put" resources that using devm_ variants.
> 
> Resend v4:
> - CC interconnect maintainer.
> - Change sign-off sequence in commit message.
> 
> Changes in v4:
> - Add a maintainer in the binding document.
> - Modify clock description.
> - Add binding document into MAINTAINERS.
> - Replace format specifier %d with %ld.
> 
> Changes in v3:
> - Move binding document to 'interconnect' and rename it.
> - Add COMPILE_TEST dependence symbol.
> - Remove need_voltage_tracking variable.
> - Move mtk_ccifreq_voltage_tracking() code into mtk_ccifreq_set_voltage().
> - Add an interation limit in the while() loop.
> - Replace 'cci_dev' with 'dev'
> - Replace old_* with pre_*
> - Remove of_match_ptr()
> - Use module_platform_driver()
> 
> Changes in v2:
> - Take MT8183 as example in binding document.
> - Use dev_err() instead of pr_err().
> - Use 'goto' statement to handle error case.
> - Clean up driver code.
> 
> Johnson Wang (2):
>   dt-bindings: interconnect: Add MediaTek CCI dt-bindings
>   PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
> 
>  .../bindings/interconnect/mediatek,cci.yaml   | 140 ++++++
>  MAINTAINERS                                   |   1 +
>  drivers/devfreq/Kconfig                       |  10 +
>  drivers/devfreq/Makefile                      |   1 +
>  drivers/devfreq/mtk-cci-devfreq.c             | 474 ++++++++++++++++++
>  5 files changed, 626 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
>  create mode 100644 drivers/devfreq/mtk-cci-devfreq.c
> 

Applied them. Thanks.

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics



More information about the Linux-mediatek mailing list