[RESEND v12 1/3] dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties
Ulf Hansson
ulf.hansson at linaro.org
Tue Jun 7 02:26:31 PDT 2022
On Tue, 7 Jun 2022 at 10:24, Axe Yang <axe.yang at mediatek.com> wrote:
>
> On Fri, 2022-06-03 at 09:28 +0200, Ulf Hansson wrote:
> > On Wed, 25 May 2022 at 03:51, Axe Yang <axe.yang at mediatek.com> wrote:
> > >
> > > Extend interrupts and pinctrls for SDIO wakeup interrupt feature.
> > > This feature allow SDIO devices alarm asynchronous interrupt to
> > > host
> > > even when host stop providing clock to SDIO card. An extra wakeup
> > > interrupt and pinctrl states for SDIO DAT1 pin state switching are
> > > required in this scenario.
> > >
> > > Reviewed-by: AngeloGioacchino Del Regno <
> > > angelogioacchino.delregno at collabora.com>
> > > Signed-off-by: Axe Yang <axe.yang at mediatek.com>
> > > ---
> > > .../devicetree/bindings/mmc/mtk-sd.yaml | 50
> > > ++++++++++++++++++-
> > > 1 file changed, 49 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> > > b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> > > index 2a2e9fa8c188..e83bf10281d6 100644
> > > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> > > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> > > @@ -72,12 +72,27 @@ properties:
> > > - const: ahb_cg
> > >
> > > interrupts:
> > > - maxItems: 1
> > > + description:
> > > + Should at least contain MSDC GIC interrupt. To support SDIO
> > > in-band wakeup, an extended
> > > + interrupt is required and be configured as wakeup source
> > > irq.
> > > + minItems: 1
> > > + maxItems: 2
> > > +
> > > + interrupt-names:
> > > + items:
> > > + - const: msdc
> > > + - const: sdio_wakeup
> > >
> > > pinctrl-names:
> > > + description:
> > > + Should at least contain default and state_uhs. To support
> > > SDIO in-band wakeup, dat1 pin
> > > + will be switched between GPIO mode and SDIO DAT1 mode,
> > > state_eint and state_dat1 are
> > > + mandatory in this scenarios.
> > > + minItems: 2
> > > items:
> > > - const: default
> > > - const: state_uhs
> > > + - const: state_eint
> >
> > Don't you need something along the lines of the below instead? I mean
> > the "state_eint" isn't always needed, right?
> >
> > oneOf:
> > - items:
> > - const: default
> > - const: state_uhs
> > - items:
> > - const: default
> > - const: state_uhs
> > - const: state_eint
> >
> No, it is not always needed.
> As Rob said, the 'minItems: 2' makes the 3rd item optional.
> Combine 'minItems' and 'description' fields, it is easy for others to
> understand how to set pinctrl related properities.
Yes, I agree.
>
> Anyway, If you insist 'oneOf' is the better way, I can update that in
> next version. What do you think?
I am fine with it as is, sorry for the noise.
>
> And thanks to your comment, I found a mistake in 'description', I
> should remove descriptions related to 'state_dat1', and I will update
> that in next version.
Okay.
>
> And do you have any comment on patch 2/3 and 3/3?
Sorry for the delay, I will have a look asap.
>
>
> Regards,
> Axe
>
>
Kind regards
Uffe
More information about the Linux-mediatek
mailing list