[PATCH v2 1/2] mt76: mt7921: fix up the monitor mode

[Lorenzo Bianconi]

> From: Sean Wang <sean.wang at mediatek.com>
> 
> Properly set up the monitor mode the firmware can support to fix up
> RTS/CTS and beacon frames cannot be captured and forwarded to the host.
> 
> Tested-by: Deren Wu <deren.wu at mediatek.com>
> Signed-off-by: Sean Wang <sean.wang at mediatek.com>
> ---
> v2: 1. add Tested-by tag
>     2. make mt76_connac_mcu_set_sniffer mt7921 specific
>     3. align the structure declartion
> ---
>  .../wireless/mediatek/mt76/mt76_connac_mcu.h  |  1 +
>  .../net/wireless/mediatek/mt76/mt7921/main.c  | 23 +++++++-------
>  .../net/wireless/mediatek/mt76/mt7921/mcu.c   | 30 +++++++++++++++++++
>  .../wireless/mediatek/mt76/mt7921/mt7921.h    |  2 ++
>  4 files changed, 46 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
> index 384c3eab1c8a..e5857d2cf78c 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
> @@ -993,6 +993,7 @@ enum {
>  	MCU_UNI_CMD_SUSPEND = 0x05,
>  	MCU_UNI_CMD_OFFLOAD = 0x06,
>  	MCU_UNI_CMD_HIF_CTRL = 0x07,
> +	MCU_UNI_CMD_SNIFFER = 0x24,
>  };
>  
>  enum {
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> index b6e836a4fad7..0f3c56530e66 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> @@ -479,6 +479,16 @@ mt7921_pm_interface_iter(void *priv, u8 *mac, struct ieee80211_vif *vif)
>  	mt7921_mcu_set_beacon_filter(dev, vif, dev->pm.enable);
>  }
>  
> +static void
> +mt7921_sniffer_interface_iter(void *priv, u8 *mac, struct ieee80211_vif *vif)
> +{
> +	struct mt7921_dev *dev = priv;
> +	struct ieee80211_hw *hw = mt76_hw(dev);
> +	bool enabled = !!(hw->conf.flags & IEEE80211_CONF_MONITOR);
> +
> +	mt7921_mcu_set_sniffer(dev, vif, enabled);
> +}
> +
>  void mt7921_set_runtime_pm(struct mt7921_dev *dev)
>  {
>  	struct ieee80211_hw *hw = dev->mphy.hw;
> @@ -516,16 +526,9 @@ static int mt7921_config(struct ieee80211_hw *hw, u32 changed)
>  	}
>  
>  	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
> -		bool enabled = !!(hw->conf.flags & IEEE80211_CONF_MONITOR);
> -
> -		if (!enabled)
> -			phy->rxfilter |= MT_WF_RFCR_DROP_OTHER_UC;
> -		else
> -			phy->rxfilter &= ~MT_WF_RFCR_DROP_OTHER_UC;

Hi Sean,

phy->rxfilter is used even in other codepath (e.g. mt7921_tm_set() or
mt7921_configure_filter()). I guess we should keep it updated here doing
something like:

		if (hw->conf.flags & IEEE80211_CONF_MONITOR)
			phy->rxfilter &= ~MT_WF_RFCR_DROP_OTHER_UC;
		else
			phy->rxfilter |= MT_WF_RFCR_DROP_OTHER_UC;

Agree?

Regards,
Lorenzo

> -
> -		mt76_rmw_field(dev, MT_DMA_DCR0(0), MT_DMA_DCR0_RXD_G5_EN,
> -			       enabled);
> -		mt76_wr(dev, MT_WF_RFCR(0), phy->rxfilter);
> +		ieee80211_iterate_active_interfaces(hw,
> +						    IEEE80211_IFACE_ITER_RESUME_ALL,
> +						    mt7921_sniffer_interface_iter, dev);
>  		mt7921_set_runtime_pm(dev);
>  	}
>  
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> index 33a836825cca..ab790e5df863 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> @@ -1133,3 +1133,33 @@ int mt7921_get_txpwr_info(struct mt7921_dev *dev, struct mt7921_txpwr *txpwr)
>  
>  	return 0;
>  }
> +
> +int mt7921_mcu_set_sniffer(struct mt7921_dev *dev, struct ieee80211_vif *vif,
> +			   bool enable)
> +{
> +	struct mt76_vif *mvif = (struct mt76_vif *)vif->drv_priv;
> +	struct {
> +		struct {
> +			u8 band_idx;
> +			u8 pad[3];
> +		} __packed hdr;
> +		struct sniffer_enable_tlv {
> +			__le16 tag;
> +			__le16 len;
> +			u8 enable;
> +			u8 pad[3];
> +		} __packed enable;
> +	} req = {
> +		.hdr = {
> +			.band_idx = mvif->band_idx,
> +		},
> +		.enable = {
> +			.tag = cpu_to_le16(0),
> +			.len = cpu_to_le16(sizeof(struct sniffer_enable_tlv)),
> +			.enable = enable,
> +		},
> +	};
> +
> +	return mt76_mcu_send_msg(&dev->mt76, MCU_UNI_CMD(SNIFFER), &req, sizeof(req),
> +				 true);
> +}
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> index 9edc83f06139..9575d571b425 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> @@ -452,4 +452,6 @@ void mt7921s_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue_entry *e);
>  bool mt7921s_tx_status_data(struct mt76_dev *mdev, u8 *update);
>  void mt7921_mac_add_txs(struct mt7921_dev *dev, void *data);
>  void mt7921_set_runtime_pm(struct mt7921_dev *dev);
> +int mt7921_mcu_set_sniffer(struct mt7921_dev *dev, struct ieee80211_vif *vif,
> +			   bool enable);
>  #endif
> -- 
> 2.25.1
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20220226/2557e4f3/attachment.sig>