[PATCH v2 11/15] arm64: dts: ti: use 'freq-table' in UFS node

[Krzysztof Kozlowski]

The 'freq-table-hz' property is deprecated by UFS bindings.
The uint32-array requires also element to be passed within one <> block.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 599861259a30..34aff40c6b8e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1257,7 +1257,9 @@ ufs at 4e84000 {
 			compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
 			reg = <0x0 0x4e84000 0x0 0x10000>;
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
+			freq-table = <250000000 250000000>,
+				     <19200000 19200000>,
+				     <19200000 19200000>;
 			clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>;
 			clock-names = "core_clk", "phy_clk", "ref_clk";
 			dma-coherent;
-- 
2.32.0