[PATCH v11 0/3] Add basic SoC support for mediatek mt8195

Tinghan Shen tinghan.shen at mediatek.com
Wed Feb 16 03:31:28 PST 2022


This series adds basic SoC support for Mediatek's SoC MT8195.

---
Changes in v11:
  - rebase on 5.17-rc4
Changes in v10:
  - clean CC list
Changes in v9:
  - remove duplicated cpus dt-bindings patch in v8
Changes in v8:
  - v7 mediatek,spi-mtk-nor.yaml patch is applied in branch for-5.17 at 
    kernel/git/broonie/spi.git
  - v7 pinctrl-mt8195.yaml patch is applied in branch for-next at 
    kernel/git/linusw/linux-pinctrl.git
  - add cortex-a78 compatible to cpus dt-bindings
  - add mediatek,drive-strength-adv property to pinctrl dt-bindings
  - fix evb dts
    - remove i2c nodes with disabled status from dts
    - fix pin properties not match pinctrl dt-bindings
    - remove unnecessary u3port*
  - fix dtsi
    - fix node format
    - reorder oscillator* nodes 
    - fix node name of cpu idle nodes
    - remove clock-frequency property in the timer node
    - reorder clock and clock names in usb nodes
Changes in v7:
  - refine title of spi-nor dt-bindings patch
  - refine commit message of pinctrl dt-bindings patch
  - update pinctrl-mt8195.yaml
    - change property pattern from 'pins' to '^pins'
    - update examples with new property in descriptions
    - add new example
  - drop '_' from node names of pinctrl subnodes in mt8195-evb.dts
Changes in v6:
  - rebase on 5.16-rc1
  - add new clock name to spi-nor dt-bindings
  - add "pins" property in pinctrl dt-bindings
  - fix fails of dtbs_checks
    - remove "arm,armv8" not matched in yaml from cpu compatile
    - fix node name of xhci
    - remvoe xhci upstreaming wakeup properties
    - remove xhci unused properties address-cells and size-cells
    - fix node name of ufs-phy 
    - fix node name of spi-nor
    - fix node name and sub-nodes of pinctrl
    - fix mmc compatible
Changes in v5:
  - enable basic nodes in mt8195-evb.dts
  - remove dedicated clock nodes
  - add mmc2 node
  - fix interrupt number of pinctrl node
  - update clock nodes to apply internal fixes
  - add dt-bindings for perficfg node

v4 thread:
https://lore.kernel.org/all/20210922093303.23720-2-seiya.wang@mediatek.com/
v3 thread:
https://lore.kernel.org/all/20210601075350.31515-2-seiya.wang@mediatek.com/
v2 thread:
https://lore.kernel.org/all/20210319023427.16711-10-seiya.wang@mediatek.com/
v1 thread:
https://lore.kernel.org/all/20210316111443.3332-11-seiya.wang@mediatek.com/
---

Tinghan Shen (3):
  dt-bindings: arm: mediatek: Add mt8195 pericfg compatible
  dt-bindings: pinctrl: mt8195: Add mediatek,drive-strength-adv property
  arm64: dts: Add mediatek SoC mt8195 and evaluation board

 .../arm/mediatek/mediatek,pericfg.yaml        |    1 +
 .../bindings/pinctrl/pinctrl-mt8195.yaml      |   35 +
 arch/arm64/boot/dts/mediatek/Makefile         |    1 +
 arch/arm64/boot/dts/mediatek/mt8195-evb.dts   |  161 +++
 arch/arm64/boot/dts/mediatek/mt8195.dtsi      | 1049 +++++++++++++++++
 5 files changed, 1247 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsi

-- 
2.18.0




More information about the Linux-mediatek mailing list