[PATCH v3] arm64: dts: mt8173: add mmsel clocks for 4K support

Bibby Hsieh bibby.hsieh at mediatek.com
Wed Jul 27 19:47:17 PDT 2016


Hi, CK,

Thanks for your comments.

On Wed, 2016-07-27 at 17:25 +0800, CK Hu wrote:
> Hi, Bibby:
> 
> On Wed, 2016-07-27 at 16:25 +0800, Bibby Hsieh wrote:
> > If MT8173 can support HDMI 4K resoultion, the
> > VENCPLL should be configured to 800MHZ.
> > We didn't set VENCPLL directly, we set the
> > mm_sel to 400MHz statically in the board device tree.
> 
> You may rewrite the description as below:
> 
> 'To support HDMI 4K resolution, mmsys need clock mm_sel to be 400MHz.'
> 
> You need not to mention VENCPLL because it's controlled by clock driver.
> 
Ok, I will modify that.
> > 
> > Signed-off-by: Bibby Hsieh <bibby.hsieh at mediatek.com>
> > ---
> > Changes since v2:
> >  - Align the clocks of dpi0 node.
> > 
> > Changes since v1:
> >  - Do not set the VENCPLL by clk_set_rate
> >    at display driver.
> >  - Configure the mm_sel to 400MHz statically
> >    in the board device tree.
> > ---
> >  arch/arm64/boot/dts/mediatek/mt8173.dtsi |    2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index 78529e4..9c22204 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > @@ -690,7 +690,9 @@
> >  			compatible = "mediatek,mt8173-mmsys", "syscon";
> >  			reg = <0 0x14000000 0 0x1000>;
> >  			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> > +			clocks = <&topckgen CLK_TOP_MM_SEL>;
> >  			#clock-cells = <1>;
> > +			clock-frequency  = <400000000>;
> >  		};
> >  
> >  		ovl0: ovl at 1400c000 {
> 
> Regards,
> CK
> 


Bibby




More information about the Linux-mediatek mailing list