[PATCH v8 5/8] [media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver

Hans Verkuil hverkuil at xs4all.nl
Mon Apr 25 06:13:45 PDT 2016


On 04/25/2016 02:30 PM, Tiffany Lin wrote:
> Add v4l2 layer encoder driver for MT8173
> 
> Signed-off-by: Tiffany Lin <tiffany.lin at mediatek.com>
> 
> ---
>  drivers/media/platform/Kconfig                     |   16 +
>  drivers/media/platform/Makefile                    |    2 +
>  drivers/media/platform/mtk-vcodec/Makefile         |   14 +
>  drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h |  339 +++++
>  drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 1303 ++++++++++++++++++++
>  drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.h |   58 +
>  .../media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c |  456 +++++++
>  .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c  |  137 ++
>  .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.h  |   26 +
>  .../media/platform/mtk-vcodec/mtk_vcodec_intr.c    |   56 +
>  .../media/platform/mtk-vcodec/mtk_vcodec_intr.h    |   27 +
>  .../media/platform/mtk-vcodec/mtk_vcodec_util.c    |   96 ++
>  .../media/platform/mtk-vcodec/mtk_vcodec_util.h    |   87 ++
>  drivers/media/platform/mtk-vcodec/venc_drv_base.h  |   62 +
>  drivers/media/platform/mtk-vcodec/venc_drv_if.c    |  107 ++
>  drivers/media/platform/mtk-vcodec/venc_drv_if.h    |  165 +++
>  drivers/media/platform/mtk-vcodec/venc_ipi_msg.h   |  210 ++++
>  17 files changed, 3161 insertions(+)
>  create mode 100644 drivers/media/platform/mtk-vcodec/Makefile
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.h
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.h
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.c
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.h
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_util.c
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h
>  create mode 100644 drivers/media/platform/mtk-vcodec/venc_drv_base.h
>  create mode 100644 drivers/media/platform/mtk-vcodec/venc_drv_if.c
>  create mode 100644 drivers/media/platform/mtk-vcodec/venc_drv_if.h
>  create mode 100644 drivers/media/platform/mtk-vcodec/venc_ipi_msg.h
> 

...

> +static int fops_vcodec_open(struct file *file)
> +{
> +	struct mtk_vcodec_dev *dev = video_drvdata(file);
> +	struct mtk_vcodec_ctx *ctx = NULL;
> +	int ret = 0;
> +
> +	mutex_lock(&dev->dev_mutex);

I would move this to after the kzalloc, since that doesn't need to be
called with the mutex held.

> +
> +	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
> +	if (!ctx) {

And then you can just do return -ENOMEM here.

> +		ret = -ENOMEM;
> +		goto err_alloc;
> +	}
> +
> +	ctx->idx = dev->curr_max_idx;

I'd do:

	/*
	 * Use simple counter to uniquely identify this context. Only
	 * used for logging.
	 */
	ctx->idx = dev->curr_max_idx++;

I would also prefer that it is call 'id' instead of idx, since that's really
what it is, just an ID.

And the counter is then id_counter instead of curr_max_idx.

> +	v4l2_fh_init(&ctx->fh, video_devdata(file));
> +	file->private_data = &ctx->fh;
> +	v4l2_fh_add(&ctx->fh);
> +	INIT_LIST_HEAD(&ctx->list);
> +	ctx->dev = dev;
> +	init_waitqueue_head(&ctx->queue);
> +
> +	ctx->type = MTK_INST_ENCODER;
> +	ret = mtk_vcodec_enc_ctrls_setup(ctx);
> +	if (ret) {
> +		mtk_v4l2_err("Failed to setup controls() (%d)",
> +				ret);
> +		goto err_ctrls_setup;
> +	}
> +	ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev_enc, ctx,
> +				&mtk_vcodec_enc_queue_init);
> +	if (IS_ERR(ctx->m2m_ctx)) {
> +		ret = PTR_ERR(ctx->m2m_ctx);
> +		mtk_v4l2_err("Failed to v4l2_m2m_ctx_init() (%d)",
> +				ret);
> +		goto err_m2m_ctx_init;
> +	}
> +	mtk_vcodec_enc_set_default_params(ctx);
> +
> +	if (v4l2_fh_is_singular(&ctx->fh)) {
> +		/*
> +		 * vpu_load_firmware checks if it was loaded already and
> +		 * does nothing in that case
> +		 */
> +		ret = vpu_load_firmware(dev->vpu_plat_dev);
> +		if (ret < 0) {
> +			/*
> +			 * Return 0 if downloading firmware successfully,
> +			 * otherwise it is failed
> +			 */
> +			mtk_v4l2_err("vpu_load_firmware failed!");
> +			goto err_load_fw;
> +		}
> +
> +		dev->enc_capability =
> +			vpu_get_venc_hw_capa(dev->vpu_plat_dev);
> +		mtk_v4l2_debug(0, "encoder capability %x", dev->enc_capability);
> +	}
> +
> +	mtk_v4l2_debug(2, "Create instance [%d]@%p m2m_ctx=%p ",
> +			ctx->idx, ctx, ctx->m2m_ctx);
> +	dev->curr_max_idx = (dev->curr_max_idx + 1) & 0xffffffffffffffff;

and drop this line.

> +	dev->num_instances++;
> +	list_add(&ctx->list, &dev->ctx_list);
> +
> +	mutex_unlock(&dev->dev_mutex);
> +	mtk_v4l2_debug(0, "%s encoder [%d]", dev_name(&dev->plat_dev->dev),
> +			ctx->idx);
> +	return ret;
> +
> +	/* Deinit when failure occurred */
> +err_load_fw:
> +	v4l2_m2m_ctx_release(ctx->m2m_ctx);
> +err_m2m_ctx_init:
> +	v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
> +err_ctrls_setup:
> +	v4l2_fh_del(&ctx->fh);
> +	v4l2_fh_exit(&ctx->fh);
> +	kfree(ctx);
> +err_alloc:
> +	mutex_unlock(&dev->dev_mutex);
> +
> +	return ret;
> +}
> +
> +static int fops_vcodec_release(struct file *file)
> +{
> +	struct mtk_vcodec_dev *dev = video_drvdata(file);
> +	struct mtk_vcodec_ctx *ctx = fh_to_ctx(file->private_data);
> +
> +	mtk_v4l2_debug(1, "[%d] encoder", ctx->idx);
> +	mutex_lock(&dev->dev_mutex);
> +
> +	mtk_vcodec_enc_release(ctx);
> +	v4l2_fh_del(&ctx->fh);
> +	v4l2_fh_exit(&ctx->fh);
> +	v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
> +	v4l2_m2m_ctx_release(ctx->m2m_ctx);
> +
> +	list_del_init(&ctx->list);
> +	dev->num_instances--;
> +	kfree(ctx);
> +	mutex_unlock(&dev->dev_mutex);
> +	return 0;
> +}

Tiffany, besides these very small items here is there anything else you are waiting for?
I'm thinking that if you fix these small issues, merge Julia Lawall's fixes and repost,
then I can make a pull request. Mauro will still have to review it as well, but I have no
more comments.

Regards,

	Hans



More information about the Linux-mediatek mailing list