[PATCH v2 4/6] soc: mediatek: Add SMI driver

[Matthias Brugger]

2015-05-21 8:16 GMT+02:00 Yong Wu <yong.wu at mediatek.com>:
> Hi Matthias,
>      Thanks very much for your suggestion.
>      Abort the smi clock name, Could you help check below.
>      The others I will improve in next time.
>
> On Tue, 2015-05-19 at 13:14 +0200, Matthias Brugger wrote:
>> 2015-05-15 11:43 GMT+02:00 Yong Wu <yong.wu at mediatek.com>:
>> >     This patch add SMI(Smart Multimedia Interface) driver. This driver is
>> > responsible to enable/disable iommu and control the clocks of each local arbiter.
>> >
> [snip]
>> > +
>> > +#define SMI_LARB_MMU_EN                (0xf00)
>> > +#define F_SMI_MMU_EN(port)     (1 << (port))
>> > +
>> > +enum {
>> > +       MTK_CLK_APB,
>> > +       MTK_CLK_SMI,
>> > +       MTK_CLK_MAX,
>>
>> Maybe add something like:
>> MTK_CLK_FIRST = MTK_CLK_APB,
>> to make the for loops better readable.
>>
> Then, Is it like this? :
>  enum {
>         MTK_CLK_FIRST = MTK_CLK_APB,
>         MTK_CLK_SMI,
>         MTK_CLK_MAX,
>  }
> or the CLK_SMI also need MTK_CLK_SECOND = MTK_CLK_SMI.


something like:
enum {
         MTK_CLK_FIRST,
         MTK_CLK_APB = MTK_CLK_FIRST,
         MTK_CLK_SMI,
         MTK_CLK_LAST,
}

So you can rewrite the for loop:
if (i = MTK_CLK_FIRST; i < MTK_CLK_LAST; i++)

Regards,
Matthias

>> > +};
>> > +
>> > +struct mtk_smi_common {
>> > +       void __iomem            *base;
>>
>> That seems to be never used. Please delete it.
>>
>> > +       struct clk              *clk[MTK_CLK_MAX];
>> > +};
>> > +
>> > +struct mtk_smi_larb {
>> > +       void __iomem            *base;
>> > +       spinlock_t              portlock; /* lock for config port */
>> > +       struct clk              *clk[MTK_CLK_MAX];
>> > +       struct device           *smi;
>> > +};
>> > +
>> Thanks,
>> Matthias
>
>



-- 
motzblog.wordpress.com