Seg fault occurs when running statically compiled binary from kernel using call_usermodehelper

Ashish Sangwan ashishsangwan2 at gmail.com
Sun Jul 7 21:46:59 EDT 2013


Forget to mention, we are using ARM

On Mon, Jul 8, 2013 at 10:45 AM, Ashish Sangwan
<ashishsangwan2 at gmail.com> wrote:
> On kernel version 3.8.13, when we try to execute a statically compiled
> binary from kernel, it is giving segfault:
>
> insmod /mnt/module2.ko
> [   35.560000] sample.static: unhandled page fault (11) at 0x00000000,
> code 0x80000007
> [   36.440000] Pid: 257, comm:        sample.static
> [   36.444000] CPU: 3    Tainted: G        W  O  (3.8.13+ #35)
> [   36.448000] PC is at 0x0
> [   36.452000] LR is at 0xa420
> [   36.456000] pc : [<00000000>]    lr : [<0000a420>]    psr: 60000030
> [   36.456000] sp : beb30d70  ip : 00000004  fp : 00000000
> [   36.464000] r10: 0000a004  r9 : 0000a0a4  r8 : 00000001
> [   36.472000] r7 : 00000001  r6 : 0008be5c  r5 : 00000000  r4 : 0008ce80
> [   36.476000] r3 : 00000001  r2 : 00000001  r1 : 00000000  r0 : 00000000
> [   36.484000] Flags: nZCv  IRQs on  FIQs on  Mode USER_32  ISA Thumb
> Segment user
> [   36.492000] Control: 10c53c7d  Table: 7b1f806a  DAC: 00000015
> [   36.496000] Backtrace:
> [   36.500000] [<c00171f8>] (dump_backtrace+0x0/0x11c) from
> [<c03e8a54>] (dump_stack+0x20/0x24)
> [   36.508000]  r6:e514dd80 r5:00000000 r4:e5175fb0 r3:271ae511
> [   36.516000] [<c03e8a34>] (dump_stack+0x0/0x24) from [<c0014174>]
> (show_regs+0x58/0x5c)
> [   36.524000] [<c001411c>] (show_regs+0x0/0x5c) from [<c001794c>]
> (show_info+0xe0/0x14c)
> [   36.532000]  r4:00000000 r3:00000000
> [   36.532000] [<c001786c>] (show_info+0x0/0x14c) from [<c001dfb4>]
> (__do_user_fault+0x78/0xc8)
> [   36.540000]  r7:80000007 r6:0000000b r5:00000000 r4:e514dd80
> [   36.548000] [<c001df3c>] (__do_user_fault+0x0/0xc8) from
> [<c03f4574>] (do_page_fault+0x360/0x3d4)
> [   36.556000] [<c03f4214>] (do_page_fault+0x0/0x3d4) from
> [<c0008470>] (do_PrefetchAbort+0x44/0xa8)
> [   36.564000] [<c000842c>] (do_PrefetchAbort+0x0/0xa8) from
> [<c03f2bbc>] (ret_from_exception+0x0/0x10)
> [   36.572000] Exception stack(0xe5175fb0 to 0xe5175ff8)
> [   36.960000] do_init_module: 'module2'->init suspiciously returned
> 11, it should follow 0/-E convention
> [   36.960000] do_init_module: loading module anyway...
> [   36.964000] Backtrace:
> [   36.968000] [<c00171f8>] (dump_backtrace+0x0/0x11c) from
> [<c03e8a54>] (dump_stack+0x20/0x24)
> [   36.972000]  r6:bf000090 r5:bf00009c r4:e51d7f48 r3:00000000
> [   36.980000] [<c03e8a34>] (dump_stack+0x0/0x24) from [<c008ae88>]
> (load_module+0x1a90/0x1eb4)
> [   36.984000] [<c00893f8>] (load_module+0x0/0x1eb4) from [<c008b3b0>]
> (sys_init_module+0xe8/0xf8)
> [   36.988000] [<c008b2c8>] (sys_init_module+0x0/0xf8) from
> [<c0012dc0>] (ret_fast_syscall+0x0/0x48)
> [   36.992000]  r6:bea51a14 r5:bea51b7c r4:00006ee4
> [   36.996000] module2 mod ld
>
> module2.c =>
> #include <linux/module.h>
> #include <linux/init.h>
> #include <linux/kmod.h>
> MODULE_LICENSE( "GPL" );
> static int test( void )
> {
>   char *argv[] = { "/mnt/sample.static", NULL };
>   static char *envp[] = {
>         "HOME=/",
>         "TERM=linux",
>         "PATH=/sbin:/bin:/usr/sbin:/usr/bin", NULL };
>   return call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC );
> }
> static int __init mod_entry_func( void )
> {
>   return test();
> }
>
> static void __exit mod_exit_func( void )
> {
>   return;
> }
> module_init( mod_entry_func );
> module_exit( mod_exit_func );
>
>
> sample.static is a simple "Hello_world" program.
>
> However, there is no problem in executing dynamically compiled binaries.
>
> When we revert commit 9fff2fa0db911b0b75ec1f9bec72460c0a676ef5 (arm:
> switch to saner kernel_execve() semantics), there is no problem.
>
> OR
>
> for kernel 3.8.13 (which is just a plain revert when arch specific
> kernel_execve was present), then also no problem =>
>
> diff --git a/kernel/kmod.c b/kernel/kmod.c
> index 0023a87..9cf6e15 100644
> --- a/kernel/kmod.c
> +++ b/kernel/kmod.c
> @@ -184,6 +184,10 @@ static int ____call_usermodehelper(void *data)
>         struct subprocess_info *sub_info = data;
>         struct cred *new;
>         int retval;
> +#ifdef ARM
> +       struct pt_regs regs;
> +       struct pt_regs *curr_ptr;
> +#endif
>         spin_lock_irq(&current->sighand->siglock);
>         flush_signal_handlers(current, 1);
> @@ -222,6 +226,36 @@ static int ____call_usermodehelper(void *data)
>         retval = do_execve(sub_info->path,
>                            (const char __user *const __user *)sub_info->argv,
>                            (const char __user *const __user *)sub_info->envp);
> +
> +#ifdef ARM
> +       if (retval)
> +               goto fail;
> +       curr_ptr = current_pt_regs();
> +       memcpy(&regs, curr_ptr, sizeof(struct pt_regs));
> +       /*
> +        * Save argc to the register structure for userspace.
> +        */
> +       regs.ARM_r0 = retval;
> +
> +       /*
> +        * We were successful.  We won't be returning to our caller, but
> +        * instead to user space by manipulating the kernel stack.
> +        */
> +       asm(    "add    r0, %0, %1\n\t"
> +               "mov    r1, %2\n\t"
> +               "mov    r2, %3\n\t"
> +               "bl     memmove\n\t"    /* copy regs to top of stack */
> +               "mov    r8, #0\n\t"     /* not a syscall */
> +               "mov    r9, %0\n\t"     /* thread structure */
> +               "mov    sp, r0\n\t"     /* reposition stack pointer */
> +               "b      ret_to_user"
> +               :
> +               : "r" (current_thread_info()),
> +                 "Ir" (THREAD_START_SP - sizeof(regs)),
> +                 "r" (&regs),
> +                 "Ir" (sizeof(regs))
> +               : "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory");
> +#endif
>         if (!retval)
>                 return 0;
> --
>
> Please suggest a proper solution.
>
> Regards,
> Ashish



More information about the linux-arm mailing list