[PATCH 0/3] iio: adc: aspeed: Fix SCU lookup for multi-SCU AST2700

[Billy Tsai]

The ADC's reference-voltage trimming data lives in a SCU register. The
driver has always located that SCU with a global, name-based
device-tree search, which works as long as a platform only has a
single node named "syscon". AST2700 splits its SCU into two
instances, syscon0 and syscon1, that share that same node name and
differ only by label and unit address, so the lookup always resolves
to syscon0 even when the ADC's trimming data lives in syscon1.

This series adds an explicit "syscon" phandle property so multi-SCU
platforms can point the ADC at the right SCU, keeps the existing
global lookup as a fallback for single-SCU platforms and already
deployed device trees, and wires the new property up on AST2700.

Patch summary:
1. dt-bindings: iio: adc: Add syscon property for multi-SCU SoCs
2. iio: adc: aspeed: Use syscon phandle for trimming data when available
3. arm64: dts: aspeed: Add syscon phandle to AST2700 ADC nodes

Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
---
Billy Tsai (3):
      dt-bindings: iio: adc: Add syscon property for multi-SCU SoCs
      iio: adc: aspeed: Use syscon phandle for trimming data when available
      arm64: dts: aspeed: Add syscon phandle to AST2700 ADC nodes

 .../bindings/iio/adc/aspeed,ast2600-adc.yaml       | 28 ++++++++++++++++++++++
 arch/arm64/boot/dts/aspeed/aspeed-g7-soc1.dtsi     |  2 ++
 drivers/iio/adc/aspeed_adc.c                       | 20 +++++++++++-----
 3 files changed, 44 insertions(+), 6 deletions(-)
---
base-commit: a3b3580713f3ac5a32dc2874ee546828977a1d68
change-id: 20261001-ast27xx-adc-upstream-34b3d9e8e27b

Best regards,
-- 
Billy Tsai <billy_tsai at aspeedtech.com>