[PATCH v1 2/2] KVM: arm64: selftests: Add an ITS MOVALL test

[Marc Zyngier]

On Tue, 29 Sep 2026 20:04:52 +0100,
Fuad Tabba <fuad.tabba at linux.dev> wrote:
> 
> Map LPI A to vCPU0's collection and LPI B to vCPU1's, remap vCPU0's
> collection to vCPU2 and MOVALL vCPU0's LPIs there, then inject both. A
> must be taken on vCPU2 and B on vCPU1. KVM's MAPC handling already moves
> A to vCPU2, so only MOVALL handling can move B: without "KVM: arm64:
> vgic-its: Fix MOVALL handling of source redistributor", it moves B to
> vCPU2 as well.

MOVALL is about moving the pending bits (see 5.3.13 in the IHI0069H.b
spec).  Doing MOVALL first and only then injecting the interrupts
doesn't quite check the MOVALL requirement. That doesn't impact KVM
itself (we don't use pending tables at all), but you probably don't
want to hardcode implementation specific behaviours here.

> 
> Assisted-by: LLM
> Signed-off-by: Fuad Tabba <fuad.tabba at linux.dev>
> ---
>  tools/testing/selftests/kvm/Makefile.kvm      |   1 +
>  .../selftests/kvm/arm64/vgic_its_movall.c     | 341 ++++++++++++++++++
>  2 files changed, 342 insertions(+)
>  create mode 100644 tools/testing/selftests/kvm/arm64/vgic_its_movall.c
> 
> diff --git a/tools/testing/selftests/kvm/Makefile.kvm b/tools/testing/selftests/kvm/Makefile.kvm
> index 908bdc7cf4f58..fb0bc99242975 100644
> --- a/tools/testing/selftests/kvm/Makefile.kvm
> +++ b/tools/testing/selftests/kvm/Makefile.kvm
> @@ -190,6 +190,7 @@ TEST_GEN_PROGS_arm64 += arm64/stage2_block_transitions
>  TEST_GEN_PROGS_arm64 += arm64/vcpu_width_config
>  TEST_GEN_PROGS_arm64 += arm64/vgic_init
>  TEST_GEN_PROGS_arm64 += arm64/vgic_irq
> +TEST_GEN_PROGS_arm64 += arm64/vgic_its_movall
>  TEST_GEN_PROGS_arm64 += arm64/vgic_its_save
>  TEST_GEN_PROGS_arm64 += arm64/vgic_lpi_stress
>  TEST_GEN_PROGS_arm64 += arm64/vgic_v5
> diff --git a/tools/testing/selftests/kvm/arm64/vgic_its_movall.c b/tools/testing/selftests/kvm/arm64/vgic_its_movall.c
> new file mode 100644
> index 0000000000000..41918576bdf63
> --- /dev/null
> +++ b/tools/testing/selftests/kvm/arm64/vgic_its_movall.c
> @@ -0,0 +1,341 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * vgic_its_movall - MOVALL does not move the LPIs of other redistributors.
> + *
> + * Two LPIs, A and B, target two different redistributors. A's collection is
> + * remapped to a third redistributor with MAPC, followed by MOVALL from the
> + * first redistributor to the third. Both LPIs are then injected. A must be
> + * taken on the third redistributor, and B must stay on its own, which is not
> + * MOVALL's source.
> + *
> + * Copyright (c) 2026 Google LLC
> + * Author: Fuad Tabba <fuad.tabba at linux.dev>
> + */
> +
> +#include <linux/sizes.h>
> +#include <pthread.h>
> +#include <stdatomic.h>
> +
> +#include "kvm_util.h"
> +#include "gic.h"
> +#include "gic_v3.h"
> +#include "gic_v3_its.h"
> +#include "processor.h"
> +#include "ucall.h"
> +#include "vgic.h"
> +
> +#define TEST_MEMSLOT_INDEX	1
> +
> +#define GIC_LPI_OFFSET		8192
> +#define NR_VCPUS		3
> +#define NR_LPIS			2
> +#define DEVICE_ID		0
> +
> +/* LPI A (event 0) starts on vCPU0 and moves to vCPU2; B (event 1) stays on vCPU1 */
> +#define LPI_A_COLL		0
> +#define LPI_B_COLL		1
> +#define MOVALL_FROM		0
> +#define MOVALL_TO		2
> +#define LPI_B_VCPU		1
> +
> +#define LPI_PROP_DEFAULT_PRIO	0xa0
> +
> +static gpa_t gpa_base;
> +
> +static struct kvm_vm *vm;
> +static struct kvm_vcpu *vcpus[NR_VCPUS];
> +static int its_fd;
> +
> +static struct test_data {
> +	bool		request_vcpus_stop;
> +
> +	gpa_t		device_table;
> +	gpa_t		collection_table;
> +	gpa_t		cmdq_base;
> +	void		*cmdq_base_va;
> +	gpa_t		itt_table;
> +
> +	gpa_t		lpi_prop_table;
> +	gpa_t		lpi_pend_tables;
> +} test_data;

There seem to be a lot of commonality with the existing
vgic_lpi_stress test.  I'd rather we make this test the container for
most ITS-related tests, instead of coming up with new individual
tests.

Thanks,

	N,

-- 
Without deviation from the norm, progress is not possible.