[PATCH] ARM: dts: helios4: add #phy-cells to USB nop phys

[Gregory CLEMENT]

Rosen Penev <rosenp at gmail.com> writes:

> The usb-nop-xceiv binding requires a #phy-cells property; without it
> dtbs_check reports:
>
>   usb2-phy: '#phy-cells' is a required property (usb-nop-xceiv)
>   usb3-phy: '#phy-cells' is a required property (usb-nop-xceiv)
>
> Add #phy-cells = <0> to both nodes. No functional change.
>
> Assisted-by: opencode:big-pickle
> Signed-off-by: Rosen Penev <rosenp at gmail.com>

Applied on mvebu/dt

Thanks,

Gregory
> ---
>  arch/arm/boot/dts/marvell/armada-388-helios4.dts | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/marvell/armada-388-helios4.dts b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
> index e63b8b5e632d..548fb92ca811 100644
> --- a/arch/arm/boot/dts/marvell/armada-388-helios4.dts
> +++ b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
> @@ -141,10 +141,12 @@ fan2: j17-pwm {
>  	usb2_phy: usb2-phy {
>  		compatible = "usb-nop-xceiv";
>  		vbus-supply = <&reg_5p0v_usb>;
> +		#phy-cells = <0>;
>  	};
>  
>  	usb3_phy: usb3-phy {
>  		compatible = "usb-nop-xceiv";
> +		#phy-cells = <0>;
>  	};
>  
>  	soc {
> -- 
> 2.55.0
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com