[PATCH] hwrng: atmel - use HZ_PER_MHZ in atmel_trng_init()

[Thorsten Blum]

Combine and inline the rate check to simplify the code. Drop the local
rate variable and use HZ_PER_MHZ instead of the hard-coded frequency.

Signed-off-by: Thorsten Blum <blum at kernel.org>
---
 drivers/char/hw_random/atmel-rng.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
index 06e79d516743..fe444196e6b3 100644
--- a/drivers/char/hw_random/atmel-rng.c
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -17,6 +17,7 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/units.h>
 
 #define TRNG_CR		0x00
 #define TRNG_MR		0x04
@@ -85,20 +86,14 @@ static int atmel_trng_read(struct hwrng *rng, void *buf, size_t max,
 
 static int atmel_trng_init(struct atmel_trng *trng)
 {
-	unsigned long rate;
 	int ret;
 
 	ret = clk_prepare_enable(trng->clk);
 	if (ret)
 		return ret;
 
-	if (trng->has_half_rate) {
-		rate = clk_get_rate(trng->clk);
-
-		/* if peripheral clk is above 100MHz, set HALFR */
-		if (rate > 100000000)
-			writel(TRNG_HALFR, trng->base + TRNG_MR);
-	}
+	if (trng->has_half_rate && clk_get_rate(trng->clk) > 100 * HZ_PER_MHZ)
+		writel(TRNG_HALFR, trng->base + TRNG_MR);
 
 	writel(TRNG_KEY | 1, trng->base + TRNG_CR);