[PATCH 2/2] arm64: dts: imx95-tqma9596sa: Add thermal zones

[Alexander Stein]

These PMIC sensors are provided by the SCMI firmware and are independent
from the mainboard.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 .../boot/dts/freescale/imx95-tqma9596sa.dtsi  | 75 +++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
index 456129f4a6825..6ed810733ff2d 100644
--- a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
@@ -458,6 +458,81 @@ &scmi_bbm {
 	linux,code = <KEY_POWER>;
 };
 
+&thermal_zones {
+	pf09-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 2>;
+
+		trips {
+			pf09_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf09_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53arm-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 4>;
+
+		cooling-maps {
+			map0 {
+				trip = <&pf5301_alert>;
+				cooling-device =
+					<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+
+		trips {
+			pf5301_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5301_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53soc-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 3>;
+
+		trips {
+			pf5302_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5302_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
 &tpm3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tpm3>;
-- 
2.55.0