[PATCH 0/2] k3-am64: Set MMC CLK pins as output

[Sai Sree Kartheek Adivi]

This patch series sets the MMC CLK pins to output mode
according to TRM specifictations on MMCSDi I/O Signals.
It also fixes some issue with MMC CLKLB pin configuration

Judith Mendez (2):
  arm64: dts: ti: k3-am64: Drop MMC CLKLB config
  arm64: dts: ti: k3-am64: Set MMC1_CLK pin as OUTPUT

 arch/arm64/boot/dts/ti/k3-am642-evm.dts | 3 +--
 arch/arm64/boot/dts/ti/k3-am642-sk.dts  | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

-- 
2.54.0