[PATCH] soc: sunxi: sram: order the publication of base against sram_dev

Jernej Škrabec jernej.skrabec at gmail.com
Sun Sep 27 05:02:11 PDT 2026


Dne torek, 22. september 2026 ob 02:48:49 Srednjeevropski poletni čas je Jaidev Shastri via B4 Relay napisal(a):
> From: Jaidev Shastri <jaidevshastri at vt.edu>
> 
> sunxi_sram_claim() is called from the probe functions of the EMAC, the
> video engine and other consumers. It gates on the file-scope base
> pointer:
> 
> 	if (!base)
> 		return -EPROBE_DEFER;
> 
> and then walks sram_dev->of_node in sunxi_sram_of_parse().

Where do you see sunxi_sram_of_parse()? This function doesn't exist
in current kernel.

> sunxi_sram_probe() writes sram_dev and then base, both with plain
> stores, and the claimer reads both with plain loads. Neither the two
> stores nor the two loads are ordered, so a claimer on another CPU can
> pass the gate and dereference sram_dev == NULL.
> 
> Keep the mapped registers in a local and publish base with
> smp_store_release() once sram_dev is set; read it with
> smp_load_acquire() in sunxi_sram_claim(). The error value is still

Where does sunxi_sram_claim() use sram_dev? It's used only in debugfs
show method.

I don't think this solves real issue, so NAK.

Best regards,
Jernej

> stored to base so that a failed probe keeps reporting it to claimers.
> 
> Found with MBCheck, a static herd7-based memory consistency checker.
> 
> Signed-off-by: Jaidev Shastri <jaidevshastri at vt.edu>
> ---
>  drivers/soc/sunxi/sunxi_sram.c | 28 +++++++++++++++++++++-------
>  1 file changed, 21 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/soc/sunxi/sunxi_sram.c b/drivers/soc/sunxi/sunxi_sram.c
> index 2ccaeacf8..0e0b86ad3 100644
> --- a/drivers/soc/sunxi/sunxi_sram.c
> +++ b/drivers/soc/sunxi/sunxi_sram.c
> @@ -266,10 +266,14 @@ int sunxi_sram_claim(struct device *dev)
>  	int err;
>  	int count = 0;
>  
> -	if (IS_ERR(base))
> -		return PTR_ERR(base);
> +	void __iomem *regs;
>  
> -	if (!base)
> +	/* Pairs with smp_store_release() in sunxi_sram_probe(). */
> +	regs = smp_load_acquire(&base);
> +	if (IS_ERR(regs))
> +		return PTR_ERR(regs);
> +
> +	if (!regs)
>  		return -EPROBE_DEFER;
>  
>  	if (!dev || !dev->of_node)
> @@ -410,6 +414,7 @@ static int __init sunxi_sram_probe(struct platform_device *pdev)
>  	const struct sunxi_sramc_variant *variant;
>  	struct device *dev = &pdev->dev;
>  	struct regmap *regmap;
> +	void __iomem *regs;
>  	int ret;
>  
>  	sram_dev = &pdev->dev;
> @@ -420,12 +425,21 @@ static int __init sunxi_sram_probe(struct platform_device *pdev)
>  
>  	dev_set_drvdata(dev, (struct sunxi_sramc_variant *)variant);
>  
> -	base = devm_platform_ioremap_resource(pdev, 0);
> -	if (IS_ERR(base))
> -		return PTR_ERR(base);
> +	regs = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(regs)) {
> +		base = regs;
> +		return PTR_ERR(regs);
> +	}
> +
> +	/*
> +	 * base is the gate that sunxi_sram_claim() tests before it walks
> +	 * sram_dev->of_node. Publish it after sram_dev so that a claimer on
> +	 * another CPU that passes the gate also sees sram_dev.
> +	 */
> +	smp_store_release(&base, regs);
>  
>  	if (variant->num_emac_clocks || variant->has_ldo_ctrl) {
> -		regmap = devm_regmap_init_mmio(dev, base, &sunxi_sram_regmap_config);
> +		regmap = devm_regmap_init_mmio(dev, regs, &sunxi_sram_regmap_config);
>  		if (IS_ERR(regmap))
>  			return PTR_ERR(regmap);
>  
> 
> ---
> base-commit: 93f51579e7df248780214094418f205253383cc5
> change-id: 20260921-mb-sunxi-sram-41c3288a4660
> 
> Best regards,
> --  
> Jaidev Shastri <jaidevshastri at vt.edu>
> 
> 
> 







More information about the linux-arm-kernel mailing list