[RFC PATCH 1/8] dt-bindings: media: Add bindings for Omnivision OV2312

[Rishikesh Donadkar]

From: Jai Luthra <j-luthra at ti.com>

Add DT bindings for Omnivision OV2312 camera sensor.

Signed-off-by: Jai Luthra <j-luthra at ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar at ti.com>
---
 .../bindings/media/i2c/ovti,ov2312.yaml       | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov2312.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2312.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2312.yaml
new file mode 100644
index 000000000000..76929fcc6550
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2312.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov2312.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV2312 Camera Sensor
+
+maintainers:
+  - Jai Luthra <j-luthra at ti.com>
+
+description: |-
+  Omnvision OV2312 is a camera sensor with an active array size of 1600x1300.
+  It supports capture of frames with a 4x4 RGB-IR bayer pattern. This provides
+  both human (RGB) and machine vision (IR) capabilities in low-light scenarios.
+
+properties:
+  compatible:
+    enum:
+      - ovti,ov2312
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xvclk
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Specifier for the GPIO connected to the RESET pin.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: ../video-interfaces.yaml#
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera at 60 {
+            compatible = "ovti,ov2312";
+            reg = <0x60>;
+
+            clocks = <&fixed_clock>;
+            clock-names = "xvclk";
+
+            reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+
+            port {
+                camera1: endpoint {
+                    remote-endpoint = <&vin1a_ep>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.34.1