[PATCH 1/3] arm64: dts: rockchip: Enable USB 2.0 host1 on Radxa ROCK 3B

[Sebastian Reichel]

Hi,

On Thu, Sep 24, 2026 at 09:03:00PM +0200, Adam Wermuth wrote:
> On Thu, 24 Sep 2026 6:12 PM, Jonas Karlman wrote:
> > This and next patch is likely best suited as an dt-overlay.
> 
> Thanks for the review. That makes sense, as the B-key slot is not
> always populated.
> 
> For v2 I will move the host1 enablement and the WWAN power, RESET#
> and W_DISABLE1# handling into a new rk3568-rock-3b-wwan.dtso overlay,
> and keep only the fan patch in the base DT.

Why would this be better suited as an Overlay? Nothing describes the
specific card plugged in as it is auto-discovered via USB. The
overlays are mostly required for things that cannot easily be
auto-detected. FWIW we don't have M.2 Key M as a DT overlay either.

Something to consider is, that for Key E and Key M there is a proper
DT binding now: Documentation/devicetree/bindings/connector/pcie-m2-*.yaml

We probably want the same for Key B.

Greetings,

-- Sebastian


> 
> 
> czw., 24 wrz 2026 o 18:12 Jonas Karlman <jonas at kwiboo.se> napisał(a):
> >
> > Hi Adam,
> >
> > On 9/24/2026 9:14 AM, Adam Wermuth wrote:
> > > The USB 2.0 data lines of the M.2 B-key slot are routed to USB2_HOST3,
> > > which is served by usb_host1_ehci/ohci through the host port of
> > > usb2phy1. Enable the controllers and the PHY port so that modules in
> > > the B-key slot, such as LTE modems, can enumerate.
> >
> > This and next patch is likely best suited as an dt-overlay.
> >
> > Regards,
> > Jonas
> >
> > >
> > > Signed-off-by: Adam Wermuth <adam at wermuth.pl>
> > > ---
> > >  arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts | 13 +++++++++++++
> > >  1 file changed, 13 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
> > > index 149a5306bb03..ad9a91c0d0d0 100644
> > > --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
> > > +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
> > > @@ -758,6 +758,14 @@ &usb_host0_xhci {
> > >       status = "okay";
> > >  };
> > >
> > > +&usb_host1_ehci {
> > > +     status = "okay";
> > > +};
> > > +
> > > +&usb_host1_ohci {
> > > +     status = "okay";
> > > +};
> > > +
> > >  &usb_host1_xhci {
> > >       status = "okay";
> > >  };
> > > @@ -780,6 +788,11 @@ &usb2phy1 {
> > >       status = "okay";
> > >  };
> > >
> > > +&usb2phy1_host {
> > > +     phy-supply = <&vcc5v0_usb_host>;
> > > +     status = "okay";
> > > +};
> > > +
> > >  &usb2phy1_otg {
> > >       phy-supply = <&vcc5v0_usb_host>;
> > >       status = "okay";
> >
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20260925/27fb4706/attachment.sig>