[PATCH v2 05/14] iio: adc: stm32-adc: rework internal channels data

[Fabrice Gasnier]

On 9/23/26 17:39, Fabrice Gasnier wrote:
> Diversity in internal channels data array lead to have zeroed data.
> To facilitate addition of new internal channels, without touching
> all array initializers, only focus on exiting channels on each
> supported ADC variant (e.g. each SoC).
> 
> This also allows to get rid of static_assert() checks.
> 
> No functional change intended.

[ snip ]

> -static const unsigned int stm32_adc_min_ts_mp1[] = { 100, 100, 100, 4300, 9800 };
> -static_assert(ARRAY_SIZE(stm32_adc_min_ts_mp1) == STM32_ADC_INT_CH_NB);
> +static const unsigned int stm32_adc_min_ts_mp1[STM32_ADC_INT_CH_NB] = {
> +	[STM32_ADC_INT_CH_VDDCORE] = 100,
> +	[STM32_ADC_INT_CH_VREFINT] = 4300,
> +	[STM32_ADC_INT_CH_VBAT] = 9800
> +};

Hi all,

Oops, I just figured out I've mixed changes with a fix here. So, I just
have sent a separate fix for that [1].
It's been noticed by sashiko [2].

I'll wait a bit before sending a V3, to leave time to review other patches.

>  
>  static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
>  	.regs = &stm32mp1_adc_regspec,
> @@ -2760,8 +2756,13 @@ static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
>  	.vref_charac_mv = 3300,
>  };
>  
> -static const unsigned int stm32_adc_min_ts_mp13[] = { 100, 0, 0, 4300, 9800 };
> -static_assert(ARRAY_SIZE(stm32_adc_min_ts_mp13) == STM32_ADC_INT_CH_NB);
> +static const unsigned int stm32_adc_min_ts_mp13[STM32_ADC_INT_CH_NB] = {
> +	[STM32_ADC_INT_CH_VDDCORE] = 1000,
> +	[STM32_ADC_INT_CH_VDDCPU] = 1000,
> +	[STM32_ADC_INT_CH_VDDQ_DDR] = 1000,
> +	[STM32_ADC_INT_CH_VREFINT] = 4300,
> +	[STM32_ADC_INT_CH_VBAT] = 9800
> +};

Same here.

[1]
https://lore.kernel.org/linux-iio/20260924-adc-fix-sampling-v1-1-13814954d8d7@foss.st.com/

[2]
https://sashiko.dev/#/message/20260923155115.20E4E1F00893%40smtp.kernel.org

BR,
Fabrice

>  
>  static const struct stm32_adc_cfg stm32mp13_adc_cfg = {
>  	.regs = &stm32mp13_adc_regspec,
>