[PATCH 1/1] arm64: dts: imx8mn-solidsense-n8-compact: drop undocumented adi,led-polarity

[Frank.Li at oss.nxp.com]

From: Frank Li <Frank.Li at nxp.com>

Drop undocument property adi,led-polarity and adi,link-st-polarity.
ethernet-phy at 0 status is disabled and no in tree overlay file to enable it.

Fixed below DTB_CHECK warnings:
  arch/arm64/boot/dts/freescale/imx8mn-solidsense-n8-compact.dtb: ethernet-phy at 0: adi,led-polarity: b'\x00\x00\x00\x01' is not of type 'object', 'integer', 'array', 'boolean', 'null'

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
cc: Josua Mayer <josua at solid-run.com>
---
 arch/arm64/boot/dts/freescale/imx8mn-solidsense-n8-compact.dts | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-solidsense-n8-compact.dts b/arch/arm64/boot/dts/freescale/imx8mn-solidsense-n8-compact.dts
index c8c6760524dbe..9b8b971c1a5c2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-solidsense-n8-compact.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-solidsense-n8-compact.dts
@@ -226,8 +226,6 @@ phy0: ethernet-phy at 0 {
 			reset-assert-us = <10>;
 			reset-deassert-us = <5000>;
 			reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-			adi,led-polarity = <GPIO_ACTIVE_LOW>;
-			adi,link-st-polarity = <GPIO_ACTIVE_LOW>;
 			status = "disabled";
 
 			leds {
-- 
2.43.0