[PATCH v2 0/2] arm64: dts: st: add display overlays for Engicam MicroGEA-STM32MP257D-RMM

[Dario Binacchi]

The board is produced in variants fitted with different displays. Move
the current RGB panel to a device tree overlay and add one for the LVDS
variant, so that the board dts describes only what is common and each
display gets its own overlay.

Changes in v2:
- Keep the full cs-gpios in the board dts, the overlay only adds the
  panel node. Suggested by Sashiko.

Dario Binacchi (2):
  arm64: dts: st: move Engicam MicroGEA-STM32MP257D-RMM display to an
    overlay
  arm64: dts: st: add Engicam MicroGEA-STM32MP257D-RMM LVDS display
    overlay

 arch/arm64/boot/dts/st/Makefile               | 12 ++++
 ...gea-rmm-overlay-am-1280800w8tzqw-t00h.dtso | 67 ++++++++++++++++++
 ...icrogea-rmm-overlay-rk050hr345-ct106a.dtso | 68 +++++++++++++++++++
 .../st/stm32mp257d-engicam-microgea-rmm.dts   | 48 +------------
 4 files changed, 149 insertions(+), 46 deletions(-)
 create mode 100644 arch/arm64/boot/dts/st/stm32mp257d-engicam-microgea-rmm-overlay-am-1280800w8tzqw-t00h.dtso
 create mode 100644 arch/arm64/boot/dts/st/stm32mp257d-engicam-microgea-rmm-overlay-rk050hr345-ct106a.dtso

---
base-commit: 2f92d900f262a16c8ae02daf53ae2910d07185f5
branch: engicam-rmm-overlays

-- 
2.43.0