[PATCH] dt-bindings: mfd: convert rk805 pinctrl to DT schema

[Quchaosheng]

pinctrl-rk805.txt describes the pinmux controller that is part of the
Rockchip RK805 PMIC. The PMIC itself is already described by
rockchip,rk805.yaml, so the pinmux part belongs there as well: the
pinctrl node is a child of the PMIC node, not a separate device.

Fold the pinmux description into rockchip,rk805.yaml and drop the
standalone text binding.

While doing so, add the missing '-pins$' child node schema. The
rockchip,rk805.yaml schema ends with 'additionalProperties: false' but did
not describe the pin configuration child nodes at all, so a valid pinmux
node like the one shown in pinctrl-rk805.txt was rejected:

    pmic at 18 (rockchip,rk805): 'rk805-default-pins' does not match any of
    the regexes: '^pinctrl-[0-9]+$'

The RK805 exposes two output-only GPIOs. Encode this as an enum on the
'pins' property so that a typo such as "gpio2" is caught.

Assisted-by: LLM
Signed-off-by: Quchaosheng <quchaosheng000406 at 163.com>
---
 .../bindings/mfd/rockchip,rk805.yaml          | 33 +++++++++-
 .../bindings/pinctrl/pinctrl-rk805.txt        | 63 -------------------
 2 files changed, 32 insertions(+), 64 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt

diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
index da2391530c16..fdc34e0902d9 100644
--- a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
@@ -86,6 +86,31 @@ properties:
         unevaluatedProperties: false
     unevaluatedProperties: false
 
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      The RK805 has two output-only GPIOs which can be muxed to the GPIO
+      function and driven low or high at boot.
+    additionalProperties: false
+
+    properties:
+      pins:
+        description:
+          List of GPIO pins to configure.
+        items:
+          enum: [gpio0, gpio1]
+        minItems: 1
+        maxItems: 2
+
+      function:
+        description:
+          The RK805 only supports the GPIO function.
+        enum: [gpio]
+
+      output-low: true
+      output-high: true
+
 allOf:
   - if:
       properties:
@@ -125,7 +150,7 @@ examples:
             interrupt-parent = <&gpio2>;
             interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
             pinctrl-names = "default";
-            pinctrl-0 = <&pmic_int_l>;
+            pinctrl-0 = <&pmic_int_l>, <&rk805_default>;
             rockchip,system-power-controller;
             wakeup-source;
             #clock-cells = <0>;
@@ -137,6 +162,12 @@ examples:
             vcc5-supply = <&vcc_io>;
             vcc6-supply = <&vcc_io>;
 
+            rk805_default: rk805-default-pins {
+                pins = "gpio0", "gpio1";
+                function = "gpio";
+                output-high;
+            };
+
             regulators {
                 vdd_logic: DCDC_REG1 {
                     regulator-name = "vdd_logic";
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
deleted file mode 100644
index 6ad49e51c72e..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Pincontrol driver for RK805 Power management IC.
-
-RK805 has 2 pins which can be configured as GPIO output only.
-
-Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt>
-for details of the common pinctrl bindings used by client devices,
-including the meaning of the phrase "pin configuration node".
-
-Optional Pinmux properties:
---------------------------
-Following properties are required if default setting of pins are required
-at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
-- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
-		<pinctrl-bindings.txt>.
-
-The pin configurations are defined as child of the pinctrl states node. Each
-sub-node have following properties:
-
-Required properties:
-------------------
-- #gpio-cells: Should be two. The first cell is the pin number and the
-  second is the GPIO flags.
-
-- gpio-controller: Marks the device node as a GPIO controller.
-
-- pins: List of pins. Valid values of pins properties are: gpio0, gpio1.
-
-First 2 properties must be added in the RK805 PMIC node, documented in
-Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
-
-Optional properties:
--------------------
-Following are optional properties defined as pinmux DT binding document
-<pinctrl-bindings.txt>. Absence of properties will leave the configuration
-on default.
-	function,
-	output-low,
-	output-high.
-
-Valid values for function properties are: gpio.
-
-There are also not customised properties for any GPIO.
-
-Example:
---------
-rk805: rk805 at 18 {
-	compatible = "rockchip,rk805";
-	...
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pmic_int_l>, <&rk805_default>;
-
-	rk805_default: pinmux {
-		gpio01 {
-			pins = "gpio0", "gpio1";
-			function = "gpio";
-			output-high;
-		};
-	};
-};
-- 
2.43.0