[PATCH RFC 12/12] PoC: arm64: dts: imx93-11x11-frdm: add multiple vdevs

[Mathieu Poirier]

On Wed, Sep 16, 2026 at 11:10:57PM +0200, Francesco Valla wrote:
> Add rings for multiple vdevs, as well as the required virtio nodes for
> I2C, SPI and GPIO functionalities. On top of that, add example
> peripherals using all of them.
> 
> NOTE: this is a Proof-Of-Concept, not meant to be integrated!
> 
> Signed-off-by: Francesco Valla <francesco at valla.it>
> ---
>  arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts | 128 +++++++++++++++++++--
>  1 file changed, 119 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> index bd14ba28690c..dfa3b122ac5f 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> @@ -53,6 +53,32 @@ button-k3 {
>  		};
>  	};
>  
> +	gpio-keys-virtio {
> +		compatible = "gpio-keys-polled";
> +		poll-interval = <100>;
> +
> +		button-v1 {
> +			label = "Button V1";
> +			linux,code = <BTN_3>;
> +			gpios = <&v_gpio 23 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		button-v2 {
> +			label = "Button V2";
> +			linux,code = <BTN_4>;
> +			gpios = <&v_gpio 24 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led {
> +			gpios = <&v_gpio 18 GPIO_ACTIVE_HIGH>;
> +			label = "LED V";
> +		};
> +	};
> +
>  	reg_usdhc2_vmmc: regulator-usdhc2 {
>  		compatible = "regulator-fixed";
>  		off-on-delay-us = <12000>;
> @@ -89,11 +115,6 @@ linux,cma {
>  			linux,cma-default;
>  		};
>  
> -		rsc_table: rsc-table at 2021e000 {
> -			reg = <0 0x2021e000 0 0x1000>;
> -			no-map;
> -		};
> -

Why is the resource table removed?  There is no mention of that in the
changelog...

>  		vdev0vring0: vdev0vring0 at a4000000 {
>  			reg = <0 0xa4000000 0 0x8000>;
>  			no-map;
> @@ -105,12 +126,42 @@ vdev0vring1: vdev0vring1 at a4008000 {
>  		};
>  
>  		vdev1vring0: vdev1vring0 at a4010000 {
> -			reg = <0 0xa4010000 0 0x8000>;
> +			reg = <0 0xa4010000 0 0x1000>;
> +			no-map;
> +		};
> +
> +		vdev2vring0: vdev2vring0 at a4011000 {
> +			reg = <0 0xa4011000 0 0x2000>;
> +			no-map;
> +		};
> +
> +		vdev2vring1: vdev2vring1 at a4013000 {
> +			reg = <0 0xa4013000 0 0x2000>;
> +			no-map;
> +		};
> +
> +		vdev3vring0: vdev3vring0 at a4015000 {
> +			reg = <0 0xa4015000 0 0x2000>;
> +			no-map;
> +		};
> +
> +		vdev4vring0: vdev4vring0 at a4017000 {
> +			reg = <0 0xa4017000 0 0x4000>;
> +			no-map;
> +		};
> +
> +		vdev5vring0: vdev5vring0 at a401B000 {
> +			reg = <0 0xa401B000 0 0x2000>;
> +			no-map;
> +		};
> +
> +		vdev5vring1: vdev5vring1 at a401D000 {
> +			reg = <0 0xa401D000 0 0x2000>;
>  			no-map;
>  		};
>  
> -		vdev1vring1: vdev1vring1 at a4018000 {
> -			reg = <0 0xa4018000 0 0x8000>;
> +		vdev5vring2: vdev5vring2 at a401F000 {
> +			reg = <0 0xa401F000 0 0x1000>;
>  			no-map;
>  		};
>  
> @@ -149,8 +200,67 @@ &cm33 {
>  		 <&mu1 3 1>;
>  	mbox-names = "tx", "rx", "rxdb";
>  	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
> -			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
> +			<&vdev1vring0>, <&vdev2vring0>, <&vdev2vring1>,
> +			<&vdev3vring0>, <&vdev4vring0>,
> +			<&vdev5vring0>, <&vdev5vring1>, <&vdev5vring2>;

Who is using vdev5 vrings?  

>  	status = "okay";
> +
> +	virtio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		vdev at 2 {
> +			reg = <2>;
> +
> +			v_gpio: gpio {
> +				compatible = "virtio,device29";
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +			};
> +		};
> +
> +		vdev at 3 {
> +			reg = <3>;
> +
> +			i2c {
> +				compatible = "virtio,device22";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				eeprom at 50 {
> +					compatible = "atmel,24c1025";
> +					reg = <0x50>;
> +				};
> +			};
> +		};
> +
> +		vdev at 4 {
> +			reg = <4>;
> +
> +			spi {
> +				compatible = "virtio,device2d";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				sram at 0 {
> +					compatible = "microchip,mchp23k256";
> +					reg = <0>;
> +					spi-max-frequency = <20000000>;
> +				};
> +
> +				lcd at 1 {
> +					compatible = "adafruit,yx240qv29", "ilitek,ili9341";
> +					reg = <1>;
> +					spi-max-frequency = <10000000>;
> +					dc-gpios = <&v_gpio 21 GPIO_ACTIVE_HIGH>;
> +					reset-gpios = <&v_gpio 20 GPIO_ACTIVE_HIGH>;
> +					rotation = <90>;
> +				};
> +			};
> +		};
> +	};
>  };
>  
>  &eqos {
> 
> -- 
> 2.55.0
>