[PATCH v7 2/2] ARM: dts: aspeed: Add ASRock Rack B650D4U BMC

Prasanth Kumar Padarthi prasanth.padarthi10 at gmail.com
Tue Sep 22 05:35:00 PDT 2026


Add the device tree for the ASRock Rack B650D4U BMC, which is
based on the ASPEED AST2600 SoC.

Describe the BMC memory, SPI NOR flash layout, UART console,
GPIO line names, video framebuffer memory, I2C EEPROM, and MAC0
connected to an RTL8211F Ethernet PHY.

Use the EEPROM on I2C7 as the NVMEM provider for the MAC0 address.

Configure MAC0 to use the RTL8211F in RGMII-ID mode.

Signed-off-by: Prasanth Kumar Padarthi <prasanth.padarthi10 at gmail.com>
---
 arch/arm/boot/dts/aspeed/Makefile             |   1 +
 .../dts/aspeed/aspeed-bmc-asrock-b650d4u.dts  | 135 ++++++++++++++++++
 2 files changed, 136 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts

diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 6b68671f9379..b109491d5c8f 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-ampere-mtmitchell.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-asrock-altrad8.dtb \
+	aspeed-bmc-asrock-b650d4u.dtb \
 	aspeed-bmc-asrock-e3c246d4i.dtb \
 	aspeed-bmc-asrock-e3c256d4i.dtb \
 	aspeed-bmc-asrock-paul-ipmi-card.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts
new file mode 100644
index 000000000000..a4e384588a54
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	compatible = "asrock,b650d4u-bmc", "aspeed,ast2600";
+	model = "ASRock Rack B650D4U BMC";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory at 80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gfx_memory: framebuffer {
+			compatible = "shared-dma-pool";
+			alignment = <0x01000000>;
+			reusable;
+			size = <0x01000000>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+
+	flash at 0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		status = "okay";
+
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&gfx {
+	memory-region = <&gfx_memory>;
+
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/* A0-A7 */	"","","","","","","","",
+		/* B0-B7 */	"","","","","","","","",
+		/* C0-C7 */	"","","","","","","","",
+		/* D0-D7 */	"","","","","","","","",
+		/* E0-E7 */	"","","","","","","","",
+		/* F0-F7 */	"","","","","","","","",
+		/* G0-G7 */	"","","","","","","","",
+		/* H0-H7 */	"","","","","","","","",
+		/* I0-I7 */	"","","","","","","","",
+		/* J0-J7 */	"","","","","","","","",
+		/* K0-K7 */	"","","","","","","","",
+		/* L0-L7 */	"","","","","","","","",
+		/* M0-M7 */	"","","","","","","","",
+		/* N0-N7 */	"","","","","","","","",
+		/* O0-O7 */	"","","","","","","","",
+		/* P0-P7 */	"button-reset-n","control-reset-n",
+		"button-power-n","control-power-n",
+		"button-nmi-n","control-nmi-n",
+		"","",
+		/* Q0-Q7 */	"","","","","","","","",
+		/* R0-R7 */	"","","","","","","","",
+		/* S0-S7 */	"","","","","","","","",
+		/* T0-T7 */	"","","","","","","","",
+		/* U0-U7 */	"","","","","","","","",
+		/* V0-V7 */	"","","","","","","","",
+		/* W0-W7 */	"","","","","","","","",
+		/* X0-X7 */	"","","","","","","","",
+		/* Y0-Y7 */	"","","","","","","","",
+		/* Z0-Z7 */	"","","","","","","","";
+};
+
+&i2c7 {
+	status = "okay";
+
+	eeprom at 57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress at 3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
+
+&mac0 {
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy at 0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
-- 
2.47.3




More information about the linux-arm-kernel mailing list