[GIT PULL] Rockchip dts64 changes for 7.4 #1

[Heiko Stuebner]

Hi soc maintainers,

please find below some initial Rockchip DT64 changes for the merge-window
for 7.4 .


Please pull.
Thanks
Heiko


The following changes since commit cee9395acd8043be0644b25c34bfa86623f2b935:

  Linux 7.3-rc1 (2026-08-30 13:34:40 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git tags/v7.4-rockchip-dts64-1

for you to fetch changes up to 7aa165b62ccaf340da22c517074e7c6853db55cd:

  arm64: dts: rockchip: support CAN1-CAN2-UART4 adapter for RK3588 Jaguar (2026-09-02 13:07:56 +0200)

----------------------------------------------------------------
New board: LubanCat 5IO

Support for the CAN controllers on RK3588 and enabling them on some
boards.

And a number of board-specific smaller changes/fixes.

----------------------------------------------------------------
Amin Gattout (1):
      arm64: dts: rockchip: correct rk3576 SDGMAC GRF reg size

Chris Morgan (1):
      arm64: dts: rockchip: Correct Device Orientation on Gameforce Ace

Cunhao Lu (3):
      arm64: dts: rockchip: add CAN-FD nodes for RK3588
      dt-bindings: arm: rockchip: Add LubanCat 5IO board
      arm64: dts: rockchip: Add LubanCat 5IO board

Diederik de Haas (7):
      arm64: dts: rockchip: Remove unneeded vcc_3v3_pcie20 on NanoPC-T6
      arm64: dts: rockchip: Fix PCIe 2 pinctrl names and sorting on NanoPC-T6
      arm64: dts: rockchip: Fix hym8563 pinctrl name and sorting on NanoPC-T6
      arm64: dts: rockchip: Don't pull up rtc int pin on NanoPC-T6
      arm64: dts: rockchip: Sort usb nodes on NanoPC-T6
      arm64: dts: rockchip: Improve sound config on NanoPC-T6
      arm64: dts: rockchip: Drop duplicate USB nodes on NanoPC-T6 LTS

Heiko Stuebner (1):
      arm64: dts: rockchip: Enable CAN controller on RK3588-Tiger-Haikou

Jiaxing Hu (1):
      arm64: dts: rockchip: fix an error and a typo in the CM5-IO comment

Quentin Schulz (2):
      arm64: dts: rockchip: enable CAN0 on RK3588 Jaguar
      arm64: dts: rockchip: support CAN1-CAN2-UART4 adapter for RK3588 Jaguar

Rudi Heitbaum (1):
      arm64: dts: rockchip: add i2c2 scl timing to rk3399pro-vmarc-som

 .../devicetree/bindings/arm/rockchip.yaml          |    7 +
 arch/arm64/boot/dts/rockchip/Makefile              |    6 +
 .../boot/dts/rockchip/rk3399pro-vmarc-som.dtsi     |    2 +
 .../boot/dts/rockchip/rk3576-armsom-cm5-io.dts     |    4 +-
 arch/arm64/boot/dts/rockchip/rk3576.dtsi           |    2 +-
 arch/arm64/boot/dts/rockchip/rk3588-base.dtsi      |   39 +
 .../rockchip/rk3588-jaguar-can1-can2-uart4.dtso    |   26 +
 arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts     |   16 +
 .../boot/dts/rockchip/rk3588-lubancat-5-btb.dtsi   |  534 ++++++++++
 .../boot/dts/rockchip/rk3588-lubancat-5io.dts      | 1032 ++++++++++++++++++++
 .../boot/dts/rockchip/rk3588-nanopc-t6-lts.dts     |   17 -
 arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi |  165 ++--
 .../boot/dts/rockchip/rk3588-tiger-haikou.dts      |    4 +
 arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi     |    5 +
 .../boot/dts/rockchip/rk3588s-gameforce-ace.dts    |    7 +-
 15 files changed, 1748 insertions(+), 118 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-jaguar-can1-can2-uart4.dtso
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-lubancat-5-btb.dtsi
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-lubancat-5io.dts