[PATCH net] net: ethernet: stmmac: dwmac-rk: fix bulk clock leak when the PHY clock fails

[Heiko Stübner]

Am Samstag, 19. September 2026, 19:42:23 Mitteleuropäische Sommerzeit schrieb Coia Prant:
> gmac_clk_enable() enables the bulk clocks first and then the optional
> PHY clock. If clk_prepare_enable() on the PHY clock fails, the function
> returns without rolling back the bulk clocks, and bsp_priv->clk_enabled
> stays false, so the later gmac_clk_enable(bsp_priv, false) becomes a
> no-op and the bulk clock references are leaked.
> 
> Add the missing clk_bulk_disable_unprepare() on that failure path.
> 
> Fixes: ea449f7fa0bf ("net: ethernet: stmmac: dwmac-rk: rework optional clock handling")
> Signed-off-by: Coia Prant <coiaprant at gmail.com>

Thanks for catching this

Reviewed-by: Heiko Stuebner <heiko at sntech.de>

> ---
>  drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> index 8d7042e689261..f3a98bd9d6ead 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> @@ -1163,7 +1163,10 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
>  
>  			ret = clk_prepare_enable(bsp_priv->clk_phy);
>  			if (ret)
> +				clk_bulk_disable_unprepare(bsp_priv->num_clks,
> +							   bsp_priv->clks);
>  				return ret;
> +			}
>  
>  			rk_configure_io_clksel(bsp_priv);
>  			rk_ungate_rmii_clock(bsp_priv);
>