[PATCH 2/2] arm64: dts: imx8mp: add Olimex i.MX8MP-SOM-EVB kit
Andrew Lunn
andrew at lunn.ch
Sun Sep 20 08:04:39 PDT 2026
On Fri, Sep 18, 2026 at 09:55:59PM +0200, Zoltan HERPAI wrote:
> This adds support for an i.MX8-based system-on-module + EVB board. The
> product pages are here [1] and here [2] respectively.
>
> There are two new files, one dts for the EVB and one dtsi for the SoM.
>
> EVB features:
> - microSD slot, eMMC headers
> - 2x Ethernet 1Gb
> - 2x USB 3.0
> - 1x m.2 PCIe slot
> - 2x CAN interface
> - audio (2x jacks via ES8328)
> - at24 eeprom
> - separate UARTs for the A53 and the M7 cores
> - HDMI
> - UEXT and GPIO connectors with I2C available
>
> SoM features:
> - NXP i.MX8MP @ 1600MHz
> - 4GByte memory
> - LVDS interface
> - 2x MIPI_CSI, 1x MIPI_DSI
> - status LED
>
> [1] https://www.olimex.com/Products/SOM/NXP-iMX8/iMX8MP-SOM-4GB-IND
> [2] https://www.olimex.com/Products/SOM/NXP-iMX8/iMX8MP-SOM-EVB-IND
>
> Signed-off-by: Zoltan HERPAI <wigyori at uid0.hu>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../dts/freescale/imx8mp-olimex-som-evb.dts | 137 +++++
> .../boot/dts/freescale/imx8mp-olimex-som.dtsi | 571 ++++++++++++++++++
> 3 files changed, 709 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-olimex-som-evb.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-olimex-som.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 95ae85ab4..3657e3464 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -447,6 +447,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-enc-carrier-board.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-smarc-universal-board.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-olimex-som-evb.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> imx8mp-phyboard-pollux-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
> imx8mp-phyboard-pollux-etml1010g3dra.dtbo
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-olimex-som-evb.dts b/arch/arm64/boot/dts/freescale/imx8mp-olimex-som-evb.dts
> new file mode 100644
> index 000000000..26fee72d5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-olimex-som-evb.dts
> @@ -0,0 +1,137 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2019 NXP
> + * Copyright 2026 Zoltan HERPAI <wigyori at uid0.hu>
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mp-olimex-som.dtsi"
> +
> +/ {
> + compatible = "olimex,imx8mp-som-evb", "fsl,imx8mp";
> + model = "Olimex i.MX8MP-SOM-EVB";
> +
> + chosen {
> + stdout-path = &uart2;
> + };
> +};
> +
> +&ecspi2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
> +
> + status = "okay";
> +
> + spidev1: spi at 0 {
> + reg = <0>;
> + compatible = "rohm,dh2228fv";
> + spi-max-frequency = <500000>;
> + };
> +};
> +
> +&flexcan1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan1>;
> +
> + status = "okay";
> +};
> +
> +&flexcan2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan2>;
> +
> + status = "okay";
> +};
> +
> +&i2c1 {
> + eeprom: eeprom at 50 {
> + compatible = "atmel,24c16";
> + reg = <0x50>;
> + pagesize = <16>;
> + };
> +};
> +
> +&snvs_pwrkey {
> + status = "okay";
> +};
> +
> +&usb3_phy0 {
> + fsl,phy-tx-preemp-amp-tune-microamp = <1800>;
> + fsl,phy-tx-vref-tune-percent = <122>;
> +
> + status = "okay";
> +};
> +
> +&usb3_0 {
> + status = "okay";
> +};
> +
> +&usb_dwc3_0 {
> + dr_mode = "host";
> +
> + status = "okay";
> +};
> +
> +&usb3_phy1 {
> + vbus-supply = <®_usb1_host_vbus>;
> + fsl,phy-tx-preemp-amp-tune-microamp = <1800>;
> + fsl,phy-tx-vref-tune-percent = <116>;
> +
> + status = "okay";
> +};
> +
> +&usb3_1 {
> + status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> + dr_mode = "host";
> +
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_ecspi2: ecspi2grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82
> + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82
> + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82
> + >;
> + };
> +
> + pinctrl_ecspi2_cs: ecspi2csgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40000
> + >;
> + };
> +
> + pinctrl_flexcan1: flexcan1grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
> + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
> + >;
> + };
> +
> + pinctrl_flexcan2: flexcan2grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154
> + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
> + >;
> + };
> +
> + pinctrl_flexcan1_reg: flexcan1reggrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x154 /* CAN1_STBY */
> + >;
> + };
> +
> + pinctrl_flexcan2_reg: flexcan2reggrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x154 /* CAN2_STBY */
> + >;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-olimex-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-olimex-som.dtsi
> new file mode 100644
> index 000000000..9876d3e7b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-olimex-som.dtsi
> @@ -0,0 +1,571 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2019 NXP
> + * Copyright 2026 Zoltan HERPAI <wigyori at uid0.hu>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/usb/pd.h>
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
> +#include <dt-bindings/leds/common.h>
> +#include "imx8mp.dtsi"
> +
> +/ {
> + compatible = "olimex,imx8mp-som", "fsl,imx8mp";
> +
> + chosen {
> + stdout-path = &uart2;
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_led>;
> +
> + led_status: status {
> + color = <LED_COLOR_ID_YELLOW>;
> + function = LED_FUNCTION_STATUS;
> + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + };
> + };
> +
> + memory at 40000000 {
> + device_type = "memory";
> + reg = <0x0 0x40000000 0 0xc0000000>,
> + <0x1 0x00000000 0 0x40000000>;
> + };
> +
> + pcie0_refclk: clock-pcie0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + };
> +
> + reg_pcie0: regulator-pcie {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie0_reg>;
> + regulator-name = "MPCIE_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_usb1_host_vbus: regulator-usb1-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usb1_host_vbus";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb1_vbus>;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_usdhc2_vmmc: regulator-usdhc2 {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
> + regulator-name = "VSD_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +};
> +
> +&A53_0 {
> + cpu-supply = <&buck2>;
> +};
> +
> +&A53_1 {
> + cpu-supply = <&buck2>;
> +};
> +
> +&A53_2 {
> + cpu-supply = <&buck2>;
> +};
> +
> +&A53_3 {
> + cpu-supply = <&buck2>;
> +};
> +
> +&eqos {
> + phy-handle = <ðphy0>;
> + phy-mode = "rgmii-id";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_eqos>;
> +
> + status = "okay";
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy at 3 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + eee-broken-100tx;
> + eee-broken-1000t;
Do you know what is actually broken here? Is it the PHY? The MAC? The
combination of MAC and PHY?
Andrew
More information about the linux-arm-kernel
mailing list