[PATCH v18 3/7] firmware: arm_rmm: Configure the RMM with the host's page size

[Jonathan Cameron]

> RMM v2.0 brings the ability to set the RMM's granule size. Check the
> feature registers and configure the RMM so that it matches the host's
> page size. This means that operations can be done with a granularity
> equal to PAGE_SIZE.
> 
> Reviewed-by: Suzuki K Poulose <suzuki.poulose at arm.com>
> Signed-off-by: Steven Price <steven.price at arm.com>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose at arm.com>

One trivial but looks like it is getting quite a few changes from
Gavin's comments so no tags yet.

Jonathan

> @@ -98,6 +117,62 @@ static int rmi_read_features(void)
>  	return 0;
>  }
>  
> +static int rmi_configure(void)
> +{
> +	unsigned long granule_feature;
> +	unsigned long granule_size;
> +	int ret = 0;
> +	struct rmm_config *config;
> +
> +	switch (PAGE_SIZE) {
> +	case SZ_4K:
> +		granule_size = RMI_GRANULE_SIZE_4KB;
> +		granule_feature = RMI_FEATURE_REGISTER_1_RMI_GRAN_SZ_4KB;
> +		break;
> +	case SZ_16K:
> +		granule_size = RMI_GRANULE_SIZE_16KB;
> +		granule_feature = RMI_FEATURE_REGISTER_1_RMI_GRAN_SZ_16KB;
> +		break;
> +	case SZ_64K:
> +		granule_size = RMI_GRANULE_SIZE_64KB;
> +		granule_feature = RMI_FEATURE_REGISTER_1_RMI_GRAN_SZ_64KB;
> +		break;
> +	default:
> +		BUILD_BUG();
> +	}
> +
> +	if (!(rmi_feat_reg(1) & granule_feature)) {
> +		pr_err("RMM does not support %luKB granules\n",
> +		       PAGE_SIZE >> 10);
> +		return -ENXIO;
> +	}
> +
> +	config = (struct rmm_config *)get_zeroed_page(GFP_KERNEL);
> +	if (!config) {
> +		pr_err("Unable to allocate memory for RMM config\n");
> +		return -ENOMEM;
> +	}
> +
> +	config->rmi_granule_size = granule_size;
> +
> +	/*
> +	 * For now we set the tracking_region_size to 0 which is the only option
> +	 * for 4KB PAGE_SIZE (1GB for 4KB PAGE_SIZE, 32MB/512MB for 16KB/64KB).
> +	 * TODO: Support other tracking sizes via Kconfig option for other
> +	 * PAGE_SIZES
> +	 */
> +	config->tracking_region_size = 0;
> +
> +	ret = rmi_rmm_config_set(virt_to_phys(config));
> +	if (ret) {
> +		pr_err("RMM config set failed (%d)\n", ret);
> +		ret = -EINVAL;
> +	}
> +
> +	free_page((unsigned long)config);

Maybe some __free() magic is applicable here - would let you just
return in the error path above making for tidier flow and get
rid of need to assign ret above.

-- 
Jonathan Cameron <jonathan.cameron at oss.qualcomm.com>