[PATCH v7 05/15] dt-bindings: gpio: pl061: add Ambarella CV75 variant

[Krzysztof Kozlowski]

On Tue, Sep 15, 2026 at 07:15:35PM +0800, Long Zhao wrote:
> Add ambarella,cv75-gpio as a PrimeCell-compatible PL061 variant, with
> arm,primecell-periphid and gpio-ranges required. Reference

You just described the diff, but this should explain why you do these
changes. Why a fixed periphid is needed? Isn't it implied by compatible?

> primecell.yaml and use unevaluatedProperties.
> 
> Signed-off-by: Long Zhao <longzhao at ambarella.com>
> ---
>  .../devicetree/bindings/gpio/pl061-gpio.yaml       | 25 +++++++++++++++++++---
>  1 file changed, 22 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
> index 4d970e55104b..00d0d8ddd2c9 100644
> --- a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
> @@ -15,17 +15,36 @@ select:
>    properties:
>      compatible:
>        contains:
> -        const: arm,pl061
> +        enum:
> +          - arm,pl061
> +          - ambarella,cv75-gpio
>    required:
>      - compatible
>  
> +allOf:

allOf should be placed after "required:" block.

> +  - $ref: /schemas/arm/primecell.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: ambarella,cv75-gpio
> +    then:
> +      properties:
> +        arm,primecell-periphid:
> +          const: 0x000e8061
> +      required:
> +        - arm,primecell-periphid
> +        - gpio-ranges
> +
>  properties:
>    $nodename:
>      pattern: "^gpio@[0-9a-f]+$"
>  
>    compatible:
>      items:
> -      - const: arm,pl061
> +      - enum:
> +          - ambarella,cv75-gpio
> +          - arm,pl061

So a PrimeCell-compatible PL061 variant which is not compatible with
PL061? You have entire commit msg to explain that and say something
non-obvious about the hardware.

>        - const: arm,primecell
>  

Best regards,
Krzysztof