[PATCH v2 3/7] arm64: dts: freescale: Add Lino iMX93

[Francesco Dolcini]

Hello Frank,

On Thu, Sep 17, 2026 at 10:51:37AM -0500, Frank Li wrote:
> On Thu, Sep 17, 2026 at 04:08:36PM +0200, Francesco Dolcini wrote:
> > On Mon, Sep 14, 2026 at 04:36:51PM +0200, Francesco Dolcini wrote:
> > > On Mon, Sep 14, 2026 at 09:28:13AM -0500, Frank Li wrote:
> > > > On Mon, Sep 14, 2026 at 07:42:14AM +0200, Francesco Dolcini wrote:
> > > > > On Fri, Sep 11, 2026 at 09:30:36AM -0500, Frank Li wrote:
> > > > > > On Fri, Sep 11, 2026 at 11:19:46AM +0200, Francesco Dolcini wrote:
> > > > > > > From: Francesco Dolcini <francesco.dolcini at toradex.com>
> > > > > > >
> > > > > > > Add support for the Lino iMX93 SoM, its Verdin adapter and development
> > > > > > > carrier board.
> > > > > > >
> > > > > > > The SoM is available in two variants, with i.MX91 or i.MX93 SoC, using
> > > > > > > the same PCB (the two chips are pin to pin compatible), to avoid
> > > > > > > duplication create a common dtsi to share commonalities.

[...]

> > > > > Is this blocking this from being picked up?
> > > > > Is there any other concern on this series?
> > >
> > > Can you answer these two questions?
> >
> > Please let me know if it is a requirement to have the gpio line names
> > wrapped with 4 elements per row or not. I am waiting on your answer on
> > this.
> 
> Although it is not "must" requirement, I think it is easy to read by
> packed 4 elements.

Thanks for the reply. Given this comment and the disagreement we have on
the read-ability I do not plan to change anything in this patch series.

Let me know if any other issue is present or if anything changes on this
specific regard.

Thanks,
Francesco