[PATCH v2 2/2] arm64: dts: exynos5433: Re-order properties to match coding style
Krzysztof Kozlowski
krzysztof.kozlowski at oss.qualcomm.com
Wed Sep 16 10:06:18 PDT 2026
Re-order a few properties to match coding style, as pointed out by
dt-check-style, e.g.:
exynos5433.dtsi:1008: [property-order] property 'interrupt-names' must be placed after 'interrupts'
exynos5433.dtsi:1013: [property-order] property 'iommus' out of canonical order (should sort before 'samsung,disp-sysreg')
Reviewed-by: Peter Griffin <peter.griffin at linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>
---
.../boot/dts/exynos/exynos5433-tm2-common.dtsi | 65 +++++++------
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 108 ++++++++++-----------
2 files changed, 88 insertions(+), 85 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index a85afdde9c41..a17a7d063212 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -65,23 +65,23 @@ homepage-key {
power-key {
gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
label = "power key";
debounce-interval = <10>;
+ linux,code = <KEY_POWER>;
};
volume-up-key {
gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
label = "volume-up key";
debounce-interval = <10>;
+ linux,code = <KEY_VOLUMEUP>;
};
volume-down-key {
gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
label = "volume-down key";
debounce-interval = <10>;
+ linux,code = <KEY_VOLUMEDOWN>;
};
};
@@ -358,11 +358,12 @@ tv_to_hdmi: endpoint {
&dsi {
vddcore-supply = <&ldo6_reg>;
vddio-supply = <&ldo7_reg>;
+ pinctrl-0 = <&te_irq>;
+ pinctrl-names = "default";
+
samsung,burst-clock-frequency = <512000000>;
samsung,esc-clock-frequency = <16000000>;
samsung,pll-clock-frequency = <24000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&te_irq>;
status = "okay";
};
@@ -410,11 +411,11 @@ &hsi2c_0 {
pmic at 66 {
compatible = "samsung,s2mps13-pmic";
+ reg = <0x66>;
interrupt-parent = <&gpa0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
- reg = <0x66>;
- samsung,s2mps11-wrstbi-ground;
wakeup-source;
+ samsung,s2mps11-wrstbi-ground;
s2mps13_osc: clocks {
compatible = "samsung,s2mps13-clk";
@@ -859,8 +860,8 @@ &hsi2c_7 {
status = "okay";
bridge at 39 {
- reg = <0x39>;
compatible = "sil,sii8620";
+ reg = <0x39>;
cvcc10-supply = <&ldo36_reg>;
iovcc18-supply = <&ldo34_reg>;
interrupt-parent = <&gpf0>;
@@ -897,9 +898,9 @@ &hsi2c_8 {
pmic at 66 {
compatible = "maxim,max77843";
+ reg = <0x66>;
interrupt-parent = <&gpa1>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
- reg = <0x66>;
muic: extcon {
compatible = "maxim,max77843-muic";
@@ -997,18 +998,19 @@ &mshc_0 {
cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
+ fifo-depth = <0x80>;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
+ &sd0_bus8 &sd0_rdqs>;
+ pinctrl-names = "default";
+ bus-width = <8>;
+ assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
+ assigned-clock-rates = <800000000>;
+
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
samsung,dw-mshc-hs400-timing = <0 3>;
samsung,read-strobe-delay = <90>;
- fifo-depth = <0x80>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
- &sd0_bus8 &sd0_rdqs>;
- bus-width = <8>;
- assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
- assigned-clock-rates = <800000000>;
status = "okay";
};
@@ -1018,20 +1020,21 @@ &mshc_2 {
disable-wp;
cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
card-detect-delay = <200>;
+ fifo-depth = <0x80>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
+ pinctrl-names = "default";
+ bus-width = <4>;
+
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
- fifo-depth = <0x80>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
- bus-width = <4>;
status = "okay";
};
&pcie {
- pinctrl-names = "default";
pinctrl-0 = <&pcie_bus &pcie_wlanen>;
+ pinctrl-names = "default";
vdd10-supply = <&ldo6_reg>;
vdd18-supply = <&ldo7_reg>;
assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>,
@@ -1064,14 +1067,14 @@ &ppmu_d1_general {
events {
ppmu_event0_d1_general: ppmu-event0-d1-general {
- event-name = "ppmu-event0-d1-general";
- };
+ event-name = "ppmu-event0-d1-general";
+ };
};
};
&pinctrl_alive {
- pinctrl-names = "default";
pinctrl-0 = <&initial_alive>;
+ pinctrl-names = "default";
initial_alive: initial-state {
PIN_IN(gpa0-0, DOWN, FAST_SR1);
@@ -1154,8 +1157,8 @@ te_irq: te-irq-pins {
};
&pinctrl_cpif {
- pinctrl-names = "default";
pinctrl-0 = <&initial_cpif>;
+ pinctrl-names = "default";
initial_cpif: initial-state {
PIN_IN(gpv6-0, DOWN, FAST_SR1);
@@ -1164,8 +1167,8 @@ initial_cpif: initial-state {
};
&pinctrl_ese {
- pinctrl-names = "default";
pinctrl-0 = <&initial_ese>;
+ pinctrl-names = "default";
pcie_wlanen: pcie-wlanen-pins {
samsung,pins = "gpj2-0";
@@ -1181,8 +1184,8 @@ initial_ese: initial-state {
};
&pinctrl_fsys {
- pinctrl-names = "default";
pinctrl-0 = <&initial_fsys>;
+ pinctrl-names = "default";
initial_fsys: initial-state {
PIN_IN(gpr3-0, NONE, FAST_SR1);
@@ -1194,8 +1197,8 @@ initial_fsys: initial-state {
};
&pinctrl_imem {
- pinctrl-names = "default";
pinctrl-0 = <&initial_imem>;
+ pinctrl-names = "default";
initial_imem: initial-state {
PIN_IN(gpf0-0, UP, FAST_SR1);
@@ -1210,8 +1213,8 @@ initial_imem: initial-state {
};
&pinctrl_nfc {
- pinctrl-names = "default";
pinctrl-0 = <&initial_nfc>;
+ pinctrl-names = "default";
initial_nfc: initial-state {
PIN_IN(gpj0-2, DOWN, FAST_SR1);
@@ -1219,8 +1222,8 @@ initial_nfc: initial-state {
};
&pinctrl_peric {
- pinctrl-names = "default";
pinctrl-0 = <&initial_peric>;
+ pinctrl-names = "default";
initial_peric: initial-state {
PIN_IN(gpv7-0, DOWN, FAST_SR1);
@@ -1274,8 +1277,8 @@ initial_peric: initial-state {
};
&pinctrl_touch {
- pinctrl-names = "default";
pinctrl-0 = <&initial_touch>;
+ pinctrl-names = "default";
initial_touch: initial-state {
PIN_IN(gpj1-2, DOWN, FAST_SR1);
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index d318c87effaa..a6352c015e16 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -93,8 +93,8 @@ core3 {
cpu0: cpu at 100 {
device_type = "cpu";
compatible = "arm,cortex-a53";
- enable-method = "psci";
reg = <0x100>;
+ enable-method = "psci";
clocks = <&cmu_apollo CLK_SCLK_APOLLO>;
clock-names = "apolloclk";
operating-points-v2 = <&cluster_a53_opp_table>;
@@ -111,8 +111,8 @@ cpu0: cpu at 100 {
cpu1: cpu at 101 {
device_type = "cpu";
compatible = "arm,cortex-a53";
- enable-method = "psci";
reg = <0x101>;
+ enable-method = "psci";
operating-points-v2 = <&cluster_a53_opp_table>;
#cooling-cells = <2>;
i-cache-size = <0x8000>;
@@ -127,8 +127,8 @@ cpu1: cpu at 101 {
cpu2: cpu at 102 {
device_type = "cpu";
compatible = "arm,cortex-a53";
- enable-method = "psci";
reg = <0x102>;
+ enable-method = "psci";
operating-points-v2 = <&cluster_a53_opp_table>;
#cooling-cells = <2>;
i-cache-size = <0x8000>;
@@ -143,8 +143,8 @@ cpu2: cpu at 102 {
cpu3: cpu at 103 {
device_type = "cpu";
compatible = "arm,cortex-a53";
- enable-method = "psci";
reg = <0x103>;
+ enable-method = "psci";
operating-points-v2 = <&cluster_a53_opp_table>;
#cooling-cells = <2>;
i-cache-size = <0x8000>;
@@ -159,8 +159,8 @@ cpu3: cpu at 103 {
cpu4: cpu at 0 {
device_type = "cpu";
compatible = "arm,cortex-a57";
- enable-method = "psci";
reg = <0x0>;
+ enable-method = "psci";
clocks = <&cmu_atlas CLK_SCLK_ATLAS>;
clock-names = "atlasclk";
operating-points-v2 = <&cluster_a57_opp_table>;
@@ -177,8 +177,8 @@ cpu4: cpu at 0 {
cpu5: cpu at 1 {
device_type = "cpu";
compatible = "arm,cortex-a57";
- enable-method = "psci";
reg = <0x1>;
+ enable-method = "psci";
operating-points-v2 = <&cluster_a57_opp_table>;
#cooling-cells = <2>;
i-cache-size = <0xc000>;
@@ -193,8 +193,8 @@ cpu5: cpu at 1 {
cpu6: cpu at 2 {
device_type = "cpu";
compatible = "arm,cortex-a57";
- enable-method = "psci";
reg = <0x2>;
+ enable-method = "psci";
operating-points-v2 = <&cluster_a57_opp_table>;
#cooling-cells = <2>;
i-cache-size = <0xc000>;
@@ -209,8 +209,8 @@ cpu6: cpu at 2 {
cpu7: cpu at 3 {
device_type = "cpu";
compatible = "arm,cortex-a57";
- enable-method = "psci";
reg = <0x3>;
+ enable-method = "psci";
operating-points-v2 = <&cluster_a57_opp_table>;
#cooling-cells = <2>;
i-cache-size = <0xc000>;
@@ -385,9 +385,9 @@ psci {
soc: soc at 0 {
compatible = "simple-bus";
+ ranges = <0x0 0x0 0x0 0x18000000>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x0 0x0 0x18000000>;
chipid at 10000000 {
compatible = "samsung,exynos5433-chipid",
@@ -1005,13 +1005,13 @@ decon: decon at 13800000 {
"pclk_smmu_decon1x", "sclk_decon_vclk",
"sclk_decon_eclk", "dsd";
power-domains = <&pd_disp>;
- interrupt-names = "fifo", "vsync", "lcd_sys";
interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
- samsung,disp-sysreg = <&syscon_disp>;
+ interrupt-names = "fifo", "vsync", "lcd_sys";
iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
iommu-names = "m0", "m1";
+ samsung,disp-sysreg = <&syscon_disp>;
status = "disabled";
@@ -1049,14 +1049,14 @@ decon_tv: decon at 13880000 {
"aclk_smmu_decon1x", "aclk_xiu_decon1x",
"pclk_smmu_decon1x", "sclk_decon_vclk",
"sclk_decon_eclk", "dsd";
- samsung,disp-sysreg = <&syscon_disp>;
power-domains = <&pd_disp>;
- interrupt-names = "fifo", "vsync", "lcd_sys";
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "fifo", "vsync", "lcd_sys";
iommus = <&sysmmu_tv0x>, <&sysmmu_tv1x>;
iommu-names = "m0", "m1";
+ samsung,disp-sysreg = <&syscon_disp>;
status = "disabled";
};
@@ -1151,9 +1151,9 @@ hdmi: hdmi at 13970000 {
"oscclk", "i_spdif_clk";
phy = <&hdmiphy>;
ddc = <&hsi2c_11>;
+ #sound-dai-cells = <0>;
samsung,syscon-phandle = <&pmu_system_controller>;
samsung,sysreg-phandle = <&syscon_disp>;
- #sound-dai-cells = <0>;
status = "disabled";
};
@@ -1479,8 +1479,8 @@ serial_0: serial at 14c10000 {
clocks = <&cmu_peric CLK_PCLK_UART0>,
<&cmu_peric CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
- pinctrl-names = "default";
pinctrl-0 = <&uart0_bus>;
+ pinctrl-names = "default";
status = "disabled";
};
@@ -1492,8 +1492,8 @@ serial_1: serial at 14c20000 {
clocks = <&cmu_peric CLK_PCLK_UART1>,
<&cmu_peric CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
- pinctrl-names = "default";
pinctrl-0 = <&uart1_bus>;
+ pinctrl-names = "default";
status = "disabled";
};
@@ -1505,8 +1505,8 @@ serial_2: serial at 14c30000 {
clocks = <&cmu_peric CLK_PCLK_UART2>,
<&cmu_peric CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
- pinctrl-names = "default";
pinctrl-0 = <&uart2_bus>;
+ pinctrl-names = "default";
status = "disabled";
};
@@ -1523,11 +1523,11 @@ spi_0: spi at 14d20000 {
<&cmu_peric CLK_SCLK_SPI0>,
<&cmu_peric CLK_SCLK_IOCLK_SPI0>;
clock-names = "spi", "spi_busclk0", "spi_ioclk";
- samsung,spi-src-clk = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
+ pinctrl-names = "default";
num-cs = <1>;
fifo-depth = <256>;
+ samsung,spi-src-clk = <0>;
status = "disabled";
};
@@ -1544,11 +1544,11 @@ spi_1: spi at 14d30000 {
<&cmu_peric CLK_SCLK_SPI1>,
<&cmu_peric CLK_SCLK_IOCLK_SPI1>;
clock-names = "spi", "spi_busclk0", "spi_ioclk";
- samsung,spi-src-clk = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
+ pinctrl-names = "default";
num-cs = <1>;
fifo-depth = <64>;
+ samsung,spi-src-clk = <0>;
status = "disabled";
};
@@ -1565,11 +1565,11 @@ spi_2: spi at 14d40000 {
<&cmu_peric CLK_SCLK_SPI2>,
<&cmu_peric CLK_SCLK_IOCLK_SPI2>;
clock-names = "spi", "spi_busclk0", "spi_ioclk";
- samsung,spi-src-clk = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
+ pinctrl-names = "default";
num-cs = <1>;
fifo-depth = <64>;
+ samsung,spi-src-clk = <0>;
status = "disabled";
};
@@ -1586,11 +1586,11 @@ spi_3: spi at 14d50000 {
<&cmu_peric CLK_SCLK_SPI3>,
<&cmu_peric CLK_SCLK_IOCLK_SPI3>;
clock-names = "spi", "spi_busclk0", "spi_ioclk";
- samsung,spi-src-clk = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&spi3_bus>;
+ pinctrl-names = "default";
num-cs = <1>;
fifo-depth = <64>;
+ samsung,spi-src-clk = <0>;
status = "disabled";
};
@@ -1607,11 +1607,11 @@ spi_4: spi at 14d00000 {
<&cmu_peric CLK_SCLK_SPI4>,
<&cmu_peric CLK_SCLK_IOCLK_SPI4>;
clock-names = "spi", "spi_busclk0", "spi_ioclk";
- samsung,spi-src-clk = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&spi4_bus>;
+ pinctrl-names = "default";
num-cs = <1>;
fifo-depth = <64>;
+ samsung,spi-src-clk = <0>;
status = "disabled";
};
@@ -1651,10 +1651,10 @@ pwm: pwm at 14dd0000 {
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
- samsung,pwm-outputs = <0>, <1>, <2>, <3>;
clocks = <&cmu_peric CLK_PCLK_PWM>;
clock-names = "timers";
#pwm-cells = <3>;
+ samsung,pwm-outputs = <0>, <1>, <2>, <3>;
status = "disabled";
};
@@ -1666,8 +1666,8 @@ hsi2c_0: i2c at 14e40000 {
interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&hs_i2c0_bus>;
+ pinctrl-names = "default";
clocks = <&cmu_peric CLK_PCLK_HSI2C0>;
clock-names = "hsi2c";
@@ -1681,8 +1681,8 @@ hsi2c_1: i2c at 14e50000 {
interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&hs_i2c1_bus>;
+ pinctrl-names = "default";
clocks = <&cmu_peric CLK_PCLK_HSI2C1>;
clock-names = "hsi2c";
@@ -1696,8 +1696,8 @@ hsi2c_2: i2c at 14e60000 {
interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&hs_i2c2_bus>;
+ pinctrl-names = "default";
clocks = <&cmu_peric CLK_PCLK_HSI2C2>;
clock-names = "hsi2c";
@@ -1711,8 +1711,8 @@ hsi2c_3: i2c at 14e70000 {
interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&hs_i2c3_bus>;
+ pinctrl-names = "default";
clocks = <&cmu_peric CLK_PCLK_HSI2C3>;
clock-names = "hsi2c";
@@ -1726,8 +1726,8 @@ hsi2c_4: i2c at 14ec0000 {
interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&hs_i2c4_bus>;
+ pinctrl-names = "default";
clocks = <&cmu_peric CLK_PCLK_HSI2C4>;
clock-names = "hsi2c";
@@ -1741,8 +1741,8 @@ hsi2c_5: i2c at 14ed0000 {
interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&hs_i2c5_bus>;
+ pinctrl-names = "default";
clocks = <&cmu_peric CLK_PCLK_HSI2C5>;
clock-names = "hsi2c";
@@ -1756,8 +1756,8 @@ hsi2c_6: i2c at 14ee0000 {
interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&hs_i2c6_bus>;
+ pinctrl-names = "default";
clocks = <&cmu_peric CLK_PCLK_HSI2C6>;
clock-names = "hsi2c";
@@ -1771,8 +1771,8 @@ hsi2c_7: i2c at 14ef0000 {
interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&hs_i2c7_bus>;
+ pinctrl-names = "default";
clocks = <&cmu_peric CLK_PCLK_HSI2C7>;
clock-names = "hsi2c";
@@ -1786,8 +1786,8 @@ hsi2c_8: i2c at 14d90000 {
interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&hs_i2c8_bus>;
+ pinctrl-names = "default";
clocks = <&cmu_peric CLK_PCLK_HSI2C8>;
clock-names = "hsi2c";
@@ -1801,8 +1801,8 @@ hsi2c_9: i2c at 14da0000 {
interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&hs_i2c9_bus>;
+ pinctrl-names = "default";
clocks = <&cmu_peric CLK_PCLK_HSI2C9>;
clock-names = "hsi2c";
@@ -1816,8 +1816,8 @@ hsi2c_10: i2c at 14de0000 {
interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&hs_i2c10_bus>;
+ pinctrl-names = "default";
clocks = <&cmu_peric CLK_PCLK_HSI2C10>;
clock-names = "hsi2c";
@@ -1831,8 +1831,8 @@ hsi2c_11: i2c at 14df0000 {
interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&hs_i2c11_bus>;
+ pinctrl-names = "default";
clocks = <&cmu_peric CLK_PCLK_HSI2C11>;
clock-names = "hsi2c";
@@ -1841,6 +1841,7 @@ hsi2c_11: i2c at 14df0000 {
usbdrd30: usb at 15400000 {
compatible = "samsung,exynos5433-dwusb3";
+ ranges = <0x0 0x15400000 0x10000>;
clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
<&cmu_fsys CLK_SCLK_USBDRD30>,
<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
@@ -1848,17 +1849,16 @@ usbdrd30: usb at 15400000 {
clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x15400000 0x10000>;
status = "disabled";
usbdrd_dwc3: usb at 0 {
compatible = "snps,dwc3";
+ reg = <0x0 0x10000>;
clocks = <&cmu_fsys CLK_SCLK_USBDRD30>,
<&cmu_fsys CLK_ACLK_USBDRD30>,
<&cmu_fsys CLK_SCLK_USBDRD30>;
clock-names = "ref", "bus_early", "suspend";
- reg = <0x0 0x10000>;
interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
@@ -1895,6 +1895,7 @@ usbhost30_phy: phy at 15580000 {
usbhost30: usb at 15a00000 {
compatible = "samsung,exynos5433-dwusb3";
+ ranges = <0x0 0x15a00000 0x10000>;
clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
<&cmu_fsys CLK_SCLK_USBHOST30>,
<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
@@ -1902,17 +1903,16 @@ usbhost30: usb at 15a00000 {
clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x15a00000 0x10000>;
status = "disabled";
usbhost_dwc3: usb at 0 {
compatible = "snps,dwc3";
+ reg = <0x0 0x10000>;
clocks = <&cmu_fsys CLK_SCLK_USBHOST30>,
<&cmu_fsys CLK_ACLK_USBHOST30>,
<&cmu_fsys CLK_SCLK_USBHOST30>;
clock-names = "ref", "bus_early", "suspend";
- reg = <0x0 0x10000>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
@@ -1922,10 +1922,10 @@ usbhost_dwc3: usb at 0 {
mshc_0: mmc at 15540000 {
compatible = "samsung,exynos5433-dw-mshc-smu",
"samsung,exynos7-dw-mshc-smu";
+ reg = <0x15540000 0x2000>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x15540000 0x2000>;
clocks = <&cmu_fsys CLK_ACLK_MMC0>,
<&cmu_fsys CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
@@ -1937,10 +1937,10 @@ mshc_0: mmc at 15540000 {
mshc_1: mmc at 15550000 {
compatible = "samsung,exynos5433-dw-mshc-smu",
"samsung,exynos7-dw-mshc-smu";
+ reg = <0x15550000 0x2000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x15550000 0x2000>;
clocks = <&cmu_fsys CLK_ACLK_MMC1>,
<&cmu_fsys CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
@@ -1952,10 +1952,10 @@ mshc_1: mmc at 15550000 {
mshc_2: mmc at 15560000 {
compatible = "samsung,exynos5433-dw-mshc-smu",
"samsung,exynos7-dw-mshc-smu";
+ reg = <0x15560000 0x2000>;
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x15560000 0x2000>;
clocks = <&cmu_fsys CLK_ACLK_MMC2>,
<&cmu_fsys CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
@@ -1985,12 +1985,12 @@ pdma1: dma-controller at 15600000 {
audio-subsystem at 11400000 {
compatible = "samsung,exynos5433-lpass";
reg = <0x11400000 0x100>, <0x11500000 0x08>;
+ ranges;
clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
clock-names = "sfr0_ctrl";
power-domains = <&pd_aud>;
#address-cells = <1>;
#size-cells = <1>;
- ranges;
adma: dma-controller at 11420000 {
compatible = "arm,pl330", "arm,primecell";
@@ -2016,8 +2016,8 @@ i2s0: i2s at 11440000 {
<&cmu_aud CLK_SCLK_I2S_BCLK>;
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
#clock-cells = <1>;
- pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
+ pinctrl-names = "default";
power-domains = <&pd_aud>;
#sound-dai-cells = <1>;
@@ -2031,8 +2031,8 @@ serial_3: serial at 11460000 {
clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
<&cmu_aud CLK_SCLK_AUD_UART>;
clock-names = "uart", "clk_uart_baud0";
- pinctrl-names = "default";
pinctrl-0 = <&uart_aud_bus>;
+ pinctrl-names = "default";
power-domains = <&pd_aud>;
status = "disabled";
@@ -2042,22 +2042,24 @@ serial_3: serial at 11460000 {
pcie_phy: pcie-phy at 15680000 {
compatible = "samsung,exynos5433-pcie-phy";
reg = <0x15680000 0x1000>;
+ #phy-cells = <0>;
samsung,pmu-syscon = <&pmu_system_controller>;
samsung,fsys-sysreg = <&syscon_fsys>;
- #phy-cells = <0>;
status = "disabled";
};
pcie: pcie at 15700000 {
+ device_type = "pci";
compatible = "samsung,exynos5433-pcie";
reg = <0x15700000 0x1000>, <0x156b0000 0x1000>,
<0x0c000000 0x1000>;
reg-names = "dbi", "elbi", "config";
+ ranges = <0x81000000 0 0 0x0c001000 0 0x00010000>,
+ <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- device_type = "pci";
interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_fsys CLK_PCIE>,
<&cmu_fsys CLK_PCLK_PCIE_PHY>;
@@ -2066,8 +2068,6 @@ pcie: pcie at 15700000 {
num-viewport = <3>;
bus-range = <0x00 0xff>;
phys = <&pcie_phy>;
- ranges = <0x81000000 0 0 0x0c001000 0 0x00010000>,
- <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
status = "disabled";
};
--
2.53.0
More information about the linux-arm-kernel
mailing list