[PATCH v3 09/19] drm/bridge: tc358767: don't create a panel_bridge

[Luca Ceresoli]

Now a panel_bridge is automatically created for every drm_panel and the
panel-bridge API is just a deprecated wrapper to access it.

Update and simplify the code by just getting a reference to the
already-existing bridge using of_drm_get_bridge_by_endpoint().

As of_drm_get_bridge_by_endpoint() returns a refcounted bridge, take care
of putting the bridge reference by using bridge->next_bridge.

Signed-off-by: Luca Ceresoli <luca.ceresoli at bootlin.com>
---
 drivers/gpu/drm/bridge/Kconfig    |  2 --
 drivers/gpu/drm/bridge/tc358767.c | 64 ++++++++++++---------------------------
 2 files changed, 20 insertions(+), 46 deletions(-)

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 89e87460aefc..4766ae85da17 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -402,8 +402,6 @@ config DRM_TOSHIBA_TC358767
 	select DRM_KMS_HELPER
 	select REGMAP_I2C
 	select DRM_MIPI_DSI
-	select DRM_PANEL
-	select DRM_PANEL_BRIDGE
 	help
 	  Toshiba TC358767 eDP bridge chip driver.
 
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index ac83af7902cd..51f4baa62a53 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -35,7 +35,6 @@
 #include <drm/drm_edid.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_of.h>
-#include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
 
@@ -370,7 +369,6 @@ struct tc_data {
 	struct drm_dp_aux	aux;
 
 	struct drm_bridge	bridge;
-	struct drm_bridge	*panel_bridge;
 	struct drm_connector	connector;
 
 	struct mipi_dsi_device	*dsi;
@@ -1742,8 +1740,8 @@ static int tc_connector_get_modes(struct drm_connector *connector)
 		return 0;
 	}
 
-	if (tc->panel_bridge) {
-		num_modes = drm_bridge_get_modes(tc->panel_bridge, connector);
+	if (tc->bridge.next_bridge) {
+		num_modes = drm_bridge_get_modes(tc->bridge.next_bridge, connector);
 		if (num_modes > 0)
 			return num_modes;
 	}
@@ -1788,7 +1786,7 @@ tc_connector_detect(struct drm_connector *connector, bool force)
 	if (tc->hpd_pin >= 0)
 		return tc_bridge_detect(&tc->bridge, connector);
 
-	if (tc->panel_bridge)
+	if (tc->bridge.next_bridge)
 		return connector_status_connected;
 	else
 		return connector_status_unknown;
@@ -1809,10 +1807,10 @@ static int tc_dpi_bridge_attach(struct drm_bridge *bridge,
 {
 	struct tc_data *tc = bridge_to_tc(bridge);
 
-	if (!tc->panel_bridge)
+	if (!tc->bridge.next_bridge)
 		return 0;
 
-	return drm_bridge_attach(tc->bridge.encoder, tc->panel_bridge,
+	return drm_bridge_attach(tc->bridge.encoder, tc->bridge.next_bridge,
 				 &tc->bridge, flags);
 }
 
@@ -1825,9 +1823,9 @@ static int tc_edp_bridge_attach(struct drm_bridge *bridge,
 	struct drm_device *drm = bridge->dev;
 	int ret;
 
-	if (tc->panel_bridge) {
+	if (tc->bridge.next_bridge) {
 		/* If a connector is required then this driver shall create it */
-		ret = drm_bridge_attach(tc->bridge.encoder, tc->panel_bridge,
+		ret = drm_bridge_attach(tc->bridge.encoder, tc->bridge.next_bridge,
 					&tc->bridge, flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 		if (ret)
 			return ret;
@@ -2318,53 +2316,31 @@ static int tc_probe_dpi_bridge_endpoint(struct tc_data *tc)
 {
 	struct device *dev = tc->dev;
 	struct drm_bridge *bridge;
-	struct drm_panel *panel;
-	int ret;
 
 	/* port at 1 is the DPI input/output port */
-	ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, &bridge);
-	if (ret && ret != -ENODEV)
-		return dev_err_probe(dev, ret,
-				     "Could not find DPI panel or bridge\n");
-
-	if (panel) {
-		bridge = devm_drm_panel_bridge_add(dev, panel);
-		drm_panel_put(panel);
-		if (IS_ERR(bridge))
-			return PTR_ERR(bridge);
-	}
-
-	if (bridge) {
-		tc->panel_bridge = bridge;
-		tc->bridge.type = DRM_MODE_CONNECTOR_DPI;
+	bridge = of_drm_get_bridge_by_endpoint(dev->of_node, 1, 0);
+	if (IS_ERR(bridge))
+		return dev_err_probe(dev, PTR_ERR(bridge),
+				     "Could not find DPI bridge\n");
 
-		return 0;
-	}
+	tc->bridge.next_bridge = bridge;
+	tc->bridge.type = DRM_MODE_CONNECTOR_DPI;
 
-	return ret;
+	return 0;
 }
 
 static int tc_probe_edp_bridge_endpoint(struct tc_data *tc)
 {
 	struct device *dev = tc->dev;
-	struct drm_panel *panel;
-	int ret;
+	struct drm_bridge *bridge;
 
 	/* port at 2 is the output port */
-	ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &panel, NULL);
-	if (ret && ret != -ENODEV)
-		return dev_err_probe(dev, ret,
-				     "Could not find DSI panel or bridge\n");
-
-	if (panel) {
-		struct drm_bridge *panel_bridge;
-
-		panel_bridge = devm_drm_panel_bridge_add(dev, panel);
-		drm_panel_put(panel);
-		if (IS_ERR(panel_bridge))
-			return PTR_ERR(panel_bridge);
+	bridge = of_drm_get_bridge_by_endpoint(dev->of_node, 2, 0);
+	if (IS_ERR(bridge) && PTR_ERR(bridge) != -ENODEV)
+		return dev_err_probe(dev, PTR_ERR(bridge), "Could not find DSI bridge\n");
 
-		tc->panel_bridge = panel_bridge;
+	if (!IS_ERR(bridge)) {
+		tc->bridge.next_bridge = bridge;
 		tc->bridge.type = DRM_MODE_CONNECTOR_eDP;
 	} else {
 		tc->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;

-- 
2.55.0