[PATCH 0/2] phy: mediatek: xsphy: add eUSB2 repeater support for USB2 ports

[AngeloGioacchino Del Regno]

On 8/26/26 14:38, Julien Massot wrote:
> Some USB2 PHY ports are connected to an external eUSB2 repeater chip
> that sits between the PHY and the USB connector. To support such
> configurations, this series adds an optional phys property to the
> MediaTek xsphy port sub-node and integrates the repeater into the USB2
> PHY init, exit and mode handling.
> 
> The binding follows the same pattern as the Synopsys eUSB2 PHY, which
> already uses a phys property at the sub-node level to reference an
> external repeater. The driver change similarly manages the repeater PHY
> alongside the MediaTek USB2 PHY.
> 
> Signed-off-by: Julien Massot <julien.massot at collabora.com>

Series is

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

Cheers,
Angelo

> ---
> Julien Massot (2):
>        dt-bindings: phy: mediatek,xsphy: add optional repeater phys property
>        phy: mediatek: xsphy: add optional repeater support for USB2 ports
> 
>   .../devicetree/bindings/phy/mediatek,xsphy.yaml    |  5 +++++
>   drivers/phy/mediatek/phy-mtk-xsphy.c               | 26 ++++++++++++++++++++--
>   2 files changed, 29 insertions(+), 2 deletions(-)
> ---
> base-commit: 917df6be58562d024374b4076e6e7618876a0c4a
> change-id: 20260826-mtk-usb2-repeater-usb2-7d5bad6afce8
> 
> Best regards,