[PATCH v1 0/2] arm64: dts: freescale: imx8m[mp]-verdin-ivy: fix DIGI_1/DIGI_2 gpio-line-names

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

gpio-line-names names the two Ivy digital inputs "DIG_1" and
"DIG_2", while the official Ivy Carrier Board datasheet (Section 2.10,
Table 12) names them DIGI_1 and DIGI_2, matching the
k3-am62-verdin-ivy.dtsi variant for the same carrier board pins.

GPIO line names are meant to be stable across the whole Verdin family
and its carrier boards, so userspace GPIO tooling that looks up a line
by name works the same regardless of which Verdin SoM is fitted on
Ivy.

Link: https://docs.toradex.com/116799-ivy_carrier_board_datasheet.pdf

Francesco Dolcini (2):
  arm64: dts: freescale: imx8mm-verdin-ivy: fix DIGI_1/DIGI_2
    gpio-line-names
  arm64: dts: freescale: imx8mp-verdin-ivy: fix DIGI_1/DIGI_2
    gpio-line-names

 arch/arm64/boot/dts/freescale/imx8mm-verdin-ivy.dtsi | 4 ++--
 arch/arm64/boot/dts/freescale/imx8mp-verdin-ivy.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

-- 
2.47.3