[PATCH net-next 1/2] dt-bindings: net: allwinner: add H616 EMAC1

[Maxime Chevallier]

Hi James,

On 9/15/26 21:03, James Hilliard wrote:
> The H616 secondary EMAC uses a separate system-control clock register
> and supports only RMII at 10/100 Mbps. Add its distinct compatible
> without an older fallback, since using the primary EMAC clock register
> would not work.
> 
> Constrain the PHY interface mode to RMII, matching the hardware. The
> EMAC1 clock register also retains the three-bit TX and five-bit RX delay
> chains, so allow the existing Allwinner delay properties for this
> compatible.

I don't think there's such a thing as RMII delays. RMII has a single
clock, contrary to RGMII that has a TX and a RX clock with a 2ns delay
between clock and data.

I think it's just a leftover in this IP from the other variants that
can do RGMII ? You should just be able to drop the comment changes here,
and same goes for the dwmac patch.

Maxime