[PATCH v7 13/15] serial: 8250_dw: add Ambarella CV75 quirks

[Andy Shevchenko]

On Tue, Sep 15, 2026 at 07:15:43PM +0800, Long Zhao via B4 Relay wrote:

> The Ambarella CV75 UART is Ambarella IP, not a Synopsys DesignWare
> licensed block. At the register level it is close enough to DW APB UART
> that a full custom UART driver is unnecessary: reuse 8250_dw with a
> small platform quirk.
> 
> Quirks:
> - keep IER ETOI (bit 5) set for RX timeout behaviour
> - skip set_rate; baud clock is managed outside the UART block

Reviewed-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>

...

>  static const struct of_device_id dw8250_of_match[] = {
> +	{ .compatible = "ambarella,cv75-uart", .data = &dw8250_ambarella_cv75_data },
>  	{ .compatible = "snps,dw-apb-uart", .data = &dw8250_dw_apb },
>  	{ .compatible = "cavium,octeon-3860-uart", .data = &dw8250_octeon_3860_data },
>  	{ .compatible = "marvell,armada-38x-uart", .data = &dw8250_armada_38x_data },

I assume we deliberately keep snps compatible to be the first, so your will be
the second. Update in case it will be v8 of the series.


-- 
With Best Regards,
Andy Shevchenko