[PATCH 1/2] dt-bindings: display: ti,tpd12s015: Convert to DT schema

[Quchaosheng]

Convert the TPD12S015 HDMI level shifter binding to DT schema.

The TI TPD12S015 is an HDMI companion chip that combines a level shifter
and ESD protection circuitry. Document the two ports it exposes between
the HDMI transmitter and the connector.

The tpd12s016 is described as software compatible with the tpd12s015 and
is listed as a fallback compatible by am57xx-idk-common.dtsi, so accept
both orderings. Boards that also route the DDC lines through the chip
pass five GPIOs rather than three.

Signed-off-by: Quchaosheng <quchaosheng000406 at 163.com>
---
 .../bindings/display/ti/ti,tpd12s015.txt      | 44 ---------
 .../bindings/display/ti/ti,tpd12s015.yaml     | 93 +++++++++++++++++++
 2 files changed, 93 insertions(+), 44 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt
 create mode 100644 Documentation/devicetree/bindings/display/ti/ti,tpd12s015.yaml

diff --git a/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt b/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt
deleted file mode 100644
index 26e6d32e3..000000000
--- a/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-TPD12S015 HDMI level shifter and ESD protection chip
-====================================================
-
-Required properties:
-- compatible: "ti,tpd12s015"
-
-Optional properties:
-- gpios: CT CP HPD, LS OE and HPD gpios
-
-Required nodes:
-- Video port 0 for HDMI input
-- Video port 1 for HDMI output
-
-Example
--------
-
-tpd12s015: encoder at 1 {
-	compatible = "ti,tpd12s015";
-
-	gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
-		<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
-		<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port at 0 {
-			reg = <0>;
-
-			tpd12s015_in: endpoint at 0 {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-
-		port at 1 {
-			reg = <1>;
-
-			tpd12s015_out: endpoint at 0 {
-				remote-endpoint = <&hdmi_connector_in>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.yaml b/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.yaml
new file mode 100644
index 000000000..b3351b601
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ti/ti,tpd12s015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPD12S015 HDMI level shifter and ESD protection chip
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen at ideasonboard.com>
+
+description: |
+  The TPD12S015 is an HDMI companion chip that combines a level shifter and
+  ESD protection circuitry. It sits between an HDMI transmitter and the HDMI
+  connector, and provides control over the level shifter enable and the
+  hot-plug detect signals.
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,tpd12s015
+      - items:
+          - const: ti,tpd12s016
+          - const: ti,tpd12s015
+
+  gpios:
+    description:
+      The CT CP HPD, LS OE and HPD GPIOs, in that order. The first GPIO
+      controls the level shifter, the second enables the level shifter
+      outputs and the third reads the hot-plug detect line. Boards that
+      also route the DDC lines through the chip use five entries, with
+      the SCL and SDA GPIOs appended.
+    minItems: 3
+    maxItems: 5
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port at 0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: HDMI input from the transmitter.
+
+      port at 1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: HDMI output to the connector.
+
+    required:
+      - port at 0
+      - port at 1
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    encoder1 {
+        compatible = "ti,tpd12s015";
+
+        gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,    /* 60, CT CP HPD */
+                <&gpio2 9 GPIO_ACTIVE_HIGH>,    /* 41, LS OE */
+                <&gpio2 31 GPIO_ACTIVE_HIGH>;    /* 63, HPD */
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port at 0 {
+                reg = <0>;
+
+                tpd12s015_in: endpoint {
+                    remote-endpoint = <&hdmi_out>;
+                };
+            };
+
+            port at 1 {
+                reg = <1>;
+
+                tpd12s015_out: endpoint {
+                    remote-endpoint = <&hdmi_connector_in>;
+                };
+            };
+        };
+    };
+
+...