[PATCH v2 3/7] arm64: dts: freescale: Add Lino iMX93

[Frank Li]

On Mon, Sep 14, 2026 at 07:42:14AM +0200, Francesco Dolcini wrote:
> Hello Frank,
>
> On Fri, Sep 11, 2026 at 09:30:36AM -0500, Frank Li wrote:
> > On Fri, Sep 11, 2026 at 11:19:46AM +0200, Francesco Dolcini wrote:
> > > From: Francesco Dolcini <francesco.dolcini at toradex.com>
> > >
> > > Add support for the Lino iMX93 SoM, its Verdin adapter and development
> > > carrier board.
> > >
> > > The SoM is available in two variants, with i.MX91 or i.MX93 SoC, using
> > > the same PCB (the two chips are pin to pin compatible), to avoid
> > > duplication create a common dtsi to share commonalities.
> > >
> > > Link: https://www.toradex.com/computer-on-modules/lino-arm-family/nxp-imx93
> > > Link: https://www.toradex.com/accessories/lino-verdin-adapter
> > > Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit
> > > Co-developed-by: Emanuele Ghidoli <emanuele.ghidoli at toradex.com>
> > > Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli at toradex.com>
> > > Co-developed-by: Ernest Van Hoecke <ernest.vanhoecke at toradex.com>
> > > Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke at toradex.com>
> > > Co-developed-by: Franz Schnyder <franz.schnyder at toradex.com>
> > > Signed-off-by: Franz Schnyder <franz.schnyder at toradex.com>
> > > Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
>
> ...
>
> > > +&gpio1 {
> > > +	gpio-line-names =
> > > +		"LINO_P18",
> > > +		"LINO_P16",
> > > +		"PMIC_I2C_SCL",
> > > +		"PMIC_I2C_SDA",
> > > +		"",
> > > +		"",
> > > +		"",
> > > +		"",
> > > +		"",
> > > +		"",
> > > +		"LINO_P65", /* 10 */
> > > +		"LINO_S18",
> > > +		"LINO_S24",
> > > +		"LINO_S20",
> > > +		"LINO_S22",
> > > +		"";
> >
> > Can you wrap to 4 names pre line
> >
> > 	gpio-line-names = "LINO_P18", "LINO_P16", "PMIC_I2C_SCL", "PMIC_I2C_SDA",
> > 			  "", "", "", "",
> >
> > Reduce LOC, and easy to locate number, such gpio 13,  second of 3rd line
>
> I already replied on the v1 that I disagree on your request.

Your v2 sent too quick before I read v1.

> To me it is
> just more readable the way it is now and I do not see minimizing the
> lines of code something that is bringing any kind of benefit on its own.

The major concern is that it makes code read harder and lost focus by long
lines.

Frank

>
> Is this blocking this from being picked up?
> Is there any other concern on this series?
>
> Francesco
>