[PATCH v5 4/4] arm64: dts: rockchip: Follow the DTS coding style in the NanoPi RK3528 devicetrees

[安容 via B4 Relay]

From: 安容 <HystericalDragons at proton.me>

Documentation/devicetree/bindings/dts-coding-style.rst asks for "status"
to be preceded by a blank line when there is content before it in the
node. The shared NanoPi RK3528 devicetree and the NanoPi Zero2 board
devicetree do not do that.

Add the missing blank lines. No functional changes.

Suggested-by: Diederik de Haas <diederik at cknow-tech.com>
Signed-off-by: 安容 <HystericalDragons at proton.me>
---
 arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts |  1 +
 arch/arm64/boot/dts/rockchip/rk3528-nanopi.dtsi      | 10 ++++++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts
index a8d99f983f..7d1ed8815d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts
@@ -76,5 +76,6 @@ &usb_host0_ohci {
 
 &usb2phy_host {
 	phy-supply = <&usb2_host_5v>;
+
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-nanopi.dtsi b/arch/arm64/boot/dts/rockchip/rk3528-nanopi.dtsi
index 06a6c0dc82..9637f91ef0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528-nanopi.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3528-nanopi.dtsi
@@ -170,17 +170,20 @@ &gmac1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
 		    <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+
 	status = "okay";
 };
 
 &gpu {
 	mali-supply = <&vdd_logic>;
+
 	status = "okay";
 };
 
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1m0_xfer>;
+
 	status = "okay";
 
 	hym8563: rtc at 51 {
@@ -244,17 +247,20 @@ sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm1m0_pins>;
+
 	status = "okay";
 };
 
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm2m0_pins>;
+
 	status = "okay";
 };
 
 &saradc {
 	vref-supply = <&vcc_1v8>;
+
 	status = "okay";
 };
 
@@ -267,6 +273,7 @@ &sdhci {
 	non-removable;
 	vmmc-supply = <&vcc_3v3>;
 	vqmmc-supply = <&vcc_1v8>;
+
 	status = "okay";
 };
 
@@ -278,12 +285,14 @@ &sdmmc {
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc3v3_sd>;
 	vqmmc-supply = <&vccio_sd>;
+
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0m0_xfer>;
+
 	status = "okay";
 };
 
@@ -292,6 +301,7 @@ &usb_host0_xhci {
 	maximum-speed = "high-speed";
 	phys = <&usb2phy_otg>;
 	phy-names = "usb2-phy";
+
 	status = "okay";
 };
 

-- 
2.55.0