[PATCH v5 6/7] arm64: dts: rockchip: describe PCIe RTL8125 Ethernet on NanoPi R6C

[Ricardo Pardini via B4 Relay]

From: Ricardo Pardini <ricardo at pardini.net>

The FriendlyElec NanoPi R6C carries one on-board Realtek RTL8125 NIC
(the LAN port; WAN uses the on-SoC gmac1 RGMII PHY) behind pcie2x1l1.

Describe the fixed function node and attach an ethernet1 alias
(ethernet0 stays mapped to gmac1), so that U-Boot's fdt_fixup_ethernet()
can inject a mac-address from its eth1addr env, for a stable MAC
across boots that both U-Boot and the kernel agree on.

The function node is added in this .dts (not the shared
rk3588s-nanopi-r6.dtsi), since on the R6C the dtsi's second
RTL8125-capable lane is empty compared to the R6S.

Signed-off-by: Ricardo Pardini <ricardo at pardini.net>
---
 arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
index ccc5e46275176..b142df0b0e180 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
@@ -7,8 +7,29 @@
 / {
 	model = "FriendlyElec NanoPi R6C";
 	compatible = "friendlyarm,nanopi-r6c", "rockchip,rk3588s";
+
+	aliases {
+		ethernet1 = &rtl_eth1;
+	};
 };
 
 &lan2_led {
 	label = "user_led";
 };
+
+&pcie2x1l1 {
+	/* on-board RTL8125 2.5GbE NIC */
+	pcie at 0,0 {
+		reg = <0x300000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+		device_type = "pci";
+		bus-range = <0x30 0x3f>;
+
+		rtl_eth1: ethernet at 0,0 {
+			compatible = "pci10ec,8125";
+			reg = <0x310000 0 0 0 0>;
+		};
+	};
+};

-- 
2.55.0