[PATCH v7 3/9] media: chips-media: wave6: Add Wave6 VPU interface
Frank Li
Frank.li at oss.nxp.com
Wed Sep 9 12:49:42 PDT 2026
On Fri, Sep 04, 2026 at 03:46:29PM +0900, Nas Chung wrote:
> Add an interface layer to manage hardware register configuration
> and communication with the Chips&Media Wave6 video codec IP.
>
> The interface provides low-level helper functions used by the
> Wave6 core driver to implement video encoding and decoding operations.
> It handles command submission to the firmware via MMIO registers,
> and waits for a response by polling the firmware busy flag.
>
> Signed-off-by: Nas Chung <nas.chung at chipsnmedia.com>
Nit: your s-o-b is last one
> Tested-by: Ming Qian <ming.qian at oss.nxp.com>
> Tested-by: Marek Vasut <marek.vasut at mailbox.org>
> ---
...
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7387a11facbe..e29018c2546b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -29239,6 +29239,7 @@ M: Jackson Lee <jackson.lee at chipsnmedia.com>
> L: linux-media at vger.kernel.org
> S: Maintained
> F: Documentation/devicetree/bindings/media/nxp,imx95-vpu.yaml
> +F: drivers/media/platform/chips-media/wave6/
Consider nxp is one major user, can you add
L: imx at lists.linux.dev
...
> +/*
> + * Wave6 series multi-standard codec IP - wave6 backend interface
> + *
> + * Copyright (C) 2025 CHIPS&MEDIA INC
2026
> + */
> +
> +#include <linux/iopoll.h>
Add space line here
> +#include "wave6-vpu-core.h"
> +#include "wave6-hw.h"
> +#include "wave6-regdefine.h"
> +#include "wave6-trace.h"
> +
> +void wave6_vpu_writel(struct vpu_core_device *core, u32 addr, u32 data)
> +{
> + wave6_vdi_writel(core->reg_base, addr, data);
> + trace_wave6_vpu_writel(core->dev, addr, data);
> +}
> +
> +u32 wave6_vpu_readl(struct vpu_core_device *core, u32 addr)
> +{
> + u32 data;
> +
> + data = wave6_vdi_readl(core->reg_base, addr);
> + trace_wave6_vpu_readl(core->dev, addr, data);
> +
> + return data;
> +}
> +
> +static void wave6_print_reg_err(struct vpu_core_device *core, u32 fail_reason)
> +{
> + void *caller = __builtin_return_address(0);
> + struct device *dev = core->dev;
> +
> + switch (fail_reason) {
> + case WAVE6_SYSERR_QUEUEING_FAIL:
> + dev_dbg(dev, "%pS: queueing failure 0x%x\n", caller, fail_reason);
why here is dev_dbg(), other is dev_err()
> + break;
> + case WAVE6_SYSERR_RESULT_NOT_READY:
> + dev_err(dev, "%pS: result not ready 0x%x\n", caller, fail_reason);
> + break;
> + case WAVE6_SYSERR_ACCESS_VIOLATION_HW:
> + dev_err(dev, "%pS: access violation 0x%x\n", caller, fail_reason);
> + break;
> + case WAVE6_SYSERR_WATCHDOG_TIMEOUT:
> + dev_err(dev, "%pS: watchdog timeout 0x%x\n", caller, fail_reason);
> + break;
> + case WAVE6_SYSERR_BUS_ERROR:
> + dev_err(dev, "%pS: bus error 0x%x\n", caller, fail_reason);
> + break;
> + case WAVE6_SYSERR_DOUBLE_FAULT:
> + dev_err(dev, "%pS: double fault 0x%x\n", caller, fail_reason);
> + break;
> + case WAVE6_SYSERR_VPU_STILL_RUNNING:
> + dev_err(dev, "%pS: still running 0x%x\n", caller, fail_reason);
> + break;
> + default:
> + dev_err(dev, "%pS: failure: 0x%x\n", caller, fail_reason);
> + break;
> + }
> +}
> +
> +static void wave6_dec_set_display_buffer(struct vpu_instance *inst, struct frame_buffer fb)
> +{
> + struct dec_info *p_dec_info = &inst->codec_info->dec_info;
> + int index;
> +
> + for (index = 0; index < WAVE6_MAX_FBS; index++) {
Now, Prefer
for (int index = 0; ....)
> + if (!p_dec_info->disp_buf[index].buf_y) {
> + p_dec_info->disp_buf[index] = fb;
> + p_dec_info->disp_buf[index].index = index;
> + break;
> + }
> + }
> +}
> +
> +static struct frame_buffer wave6_dec_get_display_buffer(struct vpu_instance *inst,
> + dma_addr_t addr)
> +{
> + struct dec_info *p_dec_info = &inst->codec_info->dec_info;
> + int i;
> + struct frame_buffer fb;
struct frame_buffer fb = { .index = -1;};
> +
> + for (i = 0; i < WAVE6_MAX_FBS; i++) {
for (int i = 0; ..)
> + if (p_dec_info->disp_buf[i].buf_y == addr)
> + return p_dec_info->disp_buf[i];
> + }
> +
> + memset(&fb, 0, sizeof(struct frame_buffer));
needn't memset here if init at declear.
> + fb.index = -1;
> +
> + return fb;
> +}
> +
...
> +
> +static int wave6_send_query(struct vpu_core_device *core, u32 id, u32 std,
> + enum wave6_query_option query_opt)
> +{
> + int ret;
> + u32 reg_val;
try keep reverise Christmas tree order.
> +
> + lockdep_assert_held(&core->hw_lock);
> +
> + vpu_write_reg(core, W6_QUERY_OPTION, query_opt);
> + wave6_send_command(core, id, std, W6_CMD_QUERY);
> +
> + ret = wave6_wait_vpu_busy(core, W6_VPU_BUSY_STATUS);
> + if (ret) {
> + dev_err(core->dev, "query timed out opt=0x%x\n", query_opt);
> + return ret;
> + }
> +
> + if (!vpu_read_reg(core, W6_RET_SUCCESS)) {
> + reg_val = vpu_read_reg(core, W6_RET_FAIL_REASON);
> + wave6_print_reg_err(core, reg_val);
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
> +int wave6_vpu_get_version(struct vpu_core_device *core)
> +{
> + struct vpu_attr *attr = &core->attr;
> + int ret;
> + u32 std_def1, conf_feature;
> +
> + lockdep_assert_held(&core->hw_lock);
> +
> + ret = wave6_send_query(core, 0, 0, W6_QUERY_OPT_GET_VPU_INFO);
> + if (ret)
> + return ret;
> +
> + attr->product_id = wave6_vpu_get_product_id(core);
> + attr->product_code = vpu_read_reg(core, W6_VPU_RET_PRODUCT_CODE);
> + attr->product_version = vpu_read_reg(core, W6_RET_PRODUCT_VERSION);
> + attr->fw_version = vpu_read_reg(core, W6_RET_FW_API_VERSION);
> + attr->fw_revision = vpu_read_reg(core, W6_RET_FW_VERSION);
> + attr->hw_version = vpu_read_reg(core, W6_RET_CONF_HW_VERSION);
> + std_def1 = vpu_read_reg(core, W6_RET_STD_DEF1);
> + conf_feature = vpu_read_reg(core, W6_RET_CONF_FEATURE);
> +
> + attr->support_decoders = 0;
> + attr->support_encoders = 0;
> + attr->support_decoders |= STD_DEF1_HEVC_DEC(std_def1) << W_HEVC_DEC;
This is depend on STD_DEF1_HEVC_DEC() is 1 bit field.
I feel like below codes is easier to read
STD_DEF1_HEVC_DEC(std_def1) ? BIT(W_HEVC_DEC) : 0;
> + attr->support_hevc10bit_dec = CONF_FEATURE_HEVC10BIT_DEC(conf_feature);
> + attr->support_decoders |= STD_DEF1_AVC_DEC(std_def1) << W_AVC_DEC;
> + attr->support_avc10bit_dec = CONF_FEATURE_AVC10BIT_DEC(conf_feature);
> + attr->support_encoders |= STD_DEF1_HEVC_ENC(std_def1) << W_HEVC_ENC;
> + attr->support_hevc10bit_enc = CONF_FEATURE_HEVC10BIT_ENC(conf_feature);
> + attr->support_encoders |= STD_DEF1_AVC_ENC(std_def1) << W_AVC_ENC;
> + attr->support_avc10bit_enc = CONF_FEATURE_AVC10BIT_ENC(conf_feature);
> +
> + return 0;
> +}
...
> +
> +int wave6_vpu_dec_register_display_buffer(struct vpu_instance *inst, struct frame_buffer fb)
> +{
> + int ret;
> + struct dec_info *p_dec_info;
> + u32 reg_val;
> + u32 c_fmt_idc, out_fmt, out_mode;
> +
> + guard(mutex)(&inst->dev->hw_lock);
> +
> + p_dec_info = &inst->codec_info->dec_info;
> +
> + vpu_write_reg(inst->dev, W6_CMD_DEC_SET_DISP_SCL_PARAM,
> + inst->scaler_info.enable);
> + reg_val = SET_DISP_SCL_PIC_SIZE_WIDTH(inst->scaler_info.width) |
> + SET_DISP_SCL_PIC_SIZE_HEIGHT(inst->scaler_info.height);
> + vpu_write_reg(inst->dev, W6_CMD_DEC_SET_DISP_SCL_PIC_SIZE, reg_val);
> + reg_val = SET_DISP_PIC_SIZE_WIDTH(p_dec_info->seq_info.pic_width) |
> + SET_DISP_PIC_SIZE_HEIGHT(p_dec_info->seq_info.pic_height);
> + vpu_write_reg(inst->dev, W6_CMD_DEC_SET_DISP_PIC_SIZE, reg_val);
> +
> + c_fmt_idc = get_chroma_format_idc(p_dec_info->wtl_format);
> + switch (p_dec_info->wtl_format) {
> + case FORMAT_420_P10_16BIT_MSB:
> + case FORMAT_422_P10_16BIT_MSB:
> + case FORMAT_444_P10_16BIT_MSB:
> + case FORMAT_400_P10_16BIT_MSB:
> + out_mode = (WTL_RIGHT_JUSTIFIED << 2) | WTL_PIXEL_16BIT;
> + break;
> + case FORMAT_420_P10_16BIT_LSB:
> + case FORMAT_422_P10_16BIT_LSB:
> + case FORMAT_444_P10_16BIT_LSB:
> + case FORMAT_400_P10_16BIT_LSB:
> + out_mode = (WTL_LEFT_JUSTIFIED << 2) | WTL_PIXEL_16BIT;
> + break;
> + case FORMAT_420_P10_32BIT_MSB:
> + case FORMAT_422_P10_32BIT_MSB:
> + case FORMAT_444_P10_32BIT_MSB:
> + case FORMAT_400_P10_32BIT_MSB:
> + out_mode = (WTL_RIGHT_JUSTIFIED << 2) | WTL_PIXEL_32BIT;
> + break;
> + case FORMAT_420_P10_32BIT_LSB:
> + case FORMAT_422_P10_32BIT_LSB:
> + case FORMAT_444_P10_32BIT_LSB:
> + case FORMAT_400_P10_32BIT_LSB:
> + out_mode = (WTL_LEFT_JUSTIFIED << 2) | WTL_PIXEL_32BIT;
> + break;
> + default:
> + out_mode = (WTL_RIGHT_JUSTIFIED << 2) | WTL_PIXEL_8BIT;
> + break;
> + }
> + out_fmt = (inst->nv21 << 1) | inst->cbcr_interleave;
Can you use macro for 1 and 2. look like it fill into
SET_DISP_COMMON_PIC_INFO_OUT_FMT()
Seem you need more detail out_fmt for WTL_PIXEL_16BIT/WTL_PIXEL_32BIT/
WTL_PIXEL_8BIT and *JUSTIFIED. should use FIELD_PREP() macro for these
settings.
> +
> + reg_val = SET_DISP_COMMON_PIC_INFO_BWB_ON |
> + SET_DISP_COMMON_PIC_INFO_C_FMT_IDC(c_fmt_idc) |
> + SET_DISP_COMMON_PIC_INFO_PIXEL_ORDER(PIXEL_ORDER_INCREASING) |
> + SET_DISP_COMMON_PIC_INFO_OUT_MODE(out_mode) |
> + SET_DISP_COMMON_PIC_INFO_OUT_FMT(out_fmt) |
> + SET_DISP_COMMON_PIC_INFO_STRIDE(fb.stride);
> + vpu_write_reg(inst->dev, W6_CMD_DEC_SET_DISP_COMMON_PIC_INFO, reg_val);
> + reg_val = SET_DISP_OPTION_ENDIAN(VDI_128BIT_BIG_ENDIAN);
> + vpu_write_reg(inst->dev, W6_CMD_DEC_SET_DISP_OPTION, reg_val);
> + reg_val = SET_DISP_PIC_INFO_L_BIT_DEPTH(fb.luma_bit_depth) |
> + SET_DISP_PIC_INFO_C_BIT_DEPTH(fb.chroma_bit_depth) |
> + SET_DISP_PIC_INFO_C_FMT_IDC(fb.c_fmt_idc);
> + vpu_write_reg(inst->dev, W6_CMD_DEC_SET_DISP_PIC_INFO, reg_val);
> + vpu_write_reg(inst->dev, W6_CMD_DEC_SET_DISP_Y_BASE, fb.buf_y);
> + vpu_write_reg(inst->dev, W6_CMD_DEC_SET_DISP_CB_BASE, fb.buf_cb);
> + vpu_write_reg(inst->dev, W6_CMD_DEC_SET_DISP_CR_BASE, fb.buf_cr);
> +
> + wave6_send_command(inst->dev, inst->id, inst->std, W6_CMD_DEC_SET_DISP);
> + ret = wave6_wait_vpu_busy(inst->dev, W6_VPU_BUSY_STATUS);
> + if (ret) {
> + dev_err(inst->dev->dev, "%s: timeout\n", __func__);
> + return ret;
> + }
> +
> + if (!vpu_read_reg(inst->dev, W6_RET_SUCCESS))
> + return -EIO;
> +
> + wave6_dec_set_display_buffer(inst, fb);
> +
> + return 0;
> +}
> +
...
> +
> +int wave6_vpu_dec_get_output_info(struct vpu_instance *inst, struct dec_output_info *info)
> +{
> + struct dec_info *p_dec_info;
> + u32 reg_val, i;
> + int decoded_idx = -1, disp_idx = -1;
> + int ret;
> +
> + if (WARN_ON(!info))
> + return -EINVAL;
> +
> + guard(mutex)(&inst->dev->hw_lock);
> +
> + p_dec_info = &inst->codec_info->dec_info;
> +
> + ret = wave6_send_query(inst->dev, inst->id, inst->std, W6_QUERY_OPT_GET_RESULT);
> + if (ret) {
> + info->rd_ptr = p_dec_info->stream_rd_ptr;
> + info->wr_ptr = p_dec_info->stream_wr_ptr;
> + return ret;
> + }
> +
> + info->decoding_success = vpu_read_reg(inst->dev, W6_RET_DEC_DECODING_SUCCESS);
> + if (!info->decoding_success)
> + info->error_reason = vpu_read_reg(inst->dev, W6_RET_DEC_ERR_INFO);
> + else
> + info->warn_info = vpu_read_reg(inst->dev, W6_RET_DEC_WARN_INFO);
> +
> + reg_val = vpu_read_reg(inst->dev, W6_RET_DEC_PIC_TYPE);
> + info->ctu_size = DEC_PIC_TYPE_CTU_SIZE(reg_val);
> + info->nal_type = DEC_PIC_TYPE_NAL_UNIT_TYPE(reg_val);
> +
> + if (reg_val & DEC_PIC_TYPE_B)
> + info->pic_type = PIC_TYPE_B;
> + else if (reg_val & DEC_PIC_TYPE_P)
> + info->pic_type = PIC_TYPE_P;
> + else if (reg_val & DEC_PIC_TYPE_I)
> + info->pic_type = PIC_TYPE_I;
> + else
> + info->pic_type = PIC_TYPE_MAX;
> + if (inst->std == W_HEVC_DEC) {
> + if (info->pic_type == PIC_TYPE_I &&
> + (info->nal_type == H265_NAL_UNIT_TYPE_IDR_W_RADL ||
> + info->nal_type == H265_NAL_UNIT_TYPE_IDR_N_LP))
> + info->pic_type = PIC_TYPE_IDR;
> + } else if (inst->std == W_AVC_DEC) {
> + if (info->pic_type == PIC_TYPE_I &&
> + info->nal_type == H264_NAL_UNIT_TYPE_IDR_PICTURE)
> + info->pic_type = PIC_TYPE_IDR;
> + }
> +
> + reg_val = vpu_read_reg(inst->dev, W6_RET_DEC_DECODED_FLAG);
> + if (reg_val) {
> + struct frame_buffer fb;
> + dma_addr_t addr = vpu_read_reg(inst->dev, W6_RET_DEC_DECODED_ADDR);
> +
> + fb = wave6_dec_get_display_buffer(inst, addr);
> + info->frame_decoded_addr = addr;
> + info->frame_decoded = true;
> + decoded_idx = fb.index;
> + }
> +
> + reg_val = vpu_read_reg(inst->dev, W6_RET_DEC_DISPLAY_FLAG);
> + if (reg_val) {
> + struct frame_buffer fb;
> + dma_addr_t addr = vpu_read_reg(inst->dev, W6_RET_DEC_DISPLAY_ADDR);
> +
> + fb = wave6_dec_get_display_buffer(inst, addr);
> + info->frame_display_addr = addr;
> + info->frame_display = true;
> + disp_idx = fb.index;
> + }
> +
> + reg_val = vpu_read_reg(inst->dev, W6_RET_DEC_DISP_IDC);
> + for (i = 0; i < WAVE6_MAX_FBS; i++) {
> + if (reg_val & (1 << i)) {
for_each_set_bit()
> + dma_addr_t addr;
> +
> + addr = vpu_read_reg(inst->dev, W6_RET_DEC_DISP_LINEAR_ADDR(i));
> +
> + info->disp_frame_addr[info->disp_frame_num] = addr;
> + info->disp_frame_num++;
> + }
> + }
> +
> + reg_val = vpu_read_reg(inst->dev, W6_RET_DEC_RELEASE_IDC);
> + for (i = 0; i < WAVE6_MAX_FBS; i++) {
ditto, check other similar logic.
> + if (reg_val & (1 << i)) {
> + dma_addr_t addr;
> +
> + addr = vpu_read_reg(inst->dev, W6_RET_DEC_DISP_LINEAR_ADDR(i));
> +
> + wave6_dec_remove_display_buffer(inst, addr);
> + info->release_disp_frame_addr[info->release_disp_frame_num] = addr;
> + info->release_disp_frame_num++;
> + }
> + }
> +
...
> +
> +int wave6_vpu_enc_start_one_frame(struct vpu_instance *inst, struct enc_param *param,
> + u32 *fail_res)
> +{
> + struct enc_cmd_enc_pic_reg reg;
struct enc_cmd_enc_pic_reg reg = {};
move set 0 out of mutex lock, slice better.
> + struct enc_info *p_enc_info;
> + int ret;
> +
> + guard(mutex)(&inst->dev->hw_lock);
> +
> + p_enc_info = &inst->codec_info->enc_info;
> +
> + memset(®, 0, sizeof(struct enc_cmd_enc_pic_reg));
> +
> + wave6_gen_enc_pic_reg(p_enc_info, inst->cbcr_interleave,
> + inst->nv21, param, ®);
> +
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_BS_START, reg.bs_start);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_BS_SIZE, reg.bs_size);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_BS_OPTION, reg.bs_option);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_SEC_AXI, reg.sec_axi);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_REPORT, reg.report);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_MV_HISTO0, reg.mv_histo0);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_MV_HISTO1, reg.mv_histo1);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_CUSTOM_MAP_PARAM, reg.custom_map_param);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_CUSTOM_MAP_ADDR, reg.custom_map_addr);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_SRC_PIC_IDX, reg.src_pic_idx);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_SRC_ADDR_Y, reg.src_addr_y);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_SRC_ADDR_U, reg.src_addr_u);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_SRC_ADDR_V, reg.src_addr_v);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_SRC_STRIDE, reg.src_stride);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_SRC_FMT, reg.src_fmt);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_SRC_AXI_SEL, reg.src_axi_sel);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_CODE_OPTION, reg.code_option);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_PARAM, reg.param);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_LONGTERM_PIC, reg.longterm_pic);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_PREFIX_SEI_NAL_ADDR, reg.prefix_sei_nal_addr);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_PREFIX_SEI_INFO, reg.prefix_sei_info);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_SUFFIX_SEI_NAL_ADDR, reg.suffix_sei_nal_addr);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_SUFFIX_SEI_INFO, reg.suffix_sei_info);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_TIMESTAMP_LOW, reg.timestamp_low);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_TIMESTAMP_HIGH, reg.timestamp_high);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_CSC_COEFF0, reg.csc_coeff[0]);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_CSC_COEFF1, reg.csc_coeff[1]);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_CSC_COEFF2, reg.csc_coeff[2]);
> + vpu_write_reg(inst->dev, W6_CMD_ENC_PIC_CSC_COEFF3, reg.csc_coeff[3]);
> +
> + wave6_send_command(inst->dev, inst->id, inst->std, W6_CMD_ENC_PIC);
> + ret = wave6_wait_vpu_busy(inst->dev, W6_VPU_BUSY_STATUS);
> + if (ret) {
> + dev_err(inst->dev->dev, "%s: timeout\n", __func__);
> + return -ETIMEDOUT;
> + }
I not sure how heavy register read() write(), consider use
readl(writel)_relex(), if need write/read many registers(). Only last one
need writel() before trigger DMA.
> +
> + if (!vpu_read_reg(inst->dev, W6_RET_SUCCESS)) {
> + *fail_res = vpu_read_reg(inst->dev, W6_RET_FAIL_REASON);
> + wave6_print_reg_err(inst->dev, *fail_res);
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
...
> +#endif /* __WAVE6_HW_H__ */
> diff --git a/drivers/media/platform/chips-media/wave6/wave6-regdefine.h b/drivers/media/platform/chips-media/wave6/wave6-regdefine.h
> new file mode 100644
> index 000000000000..1d495145bbbd
> --- /dev/null
> +++ b/drivers/media/platform/chips-media/wave6/wave6-regdefine.h
> @@ -0,0 +1,649 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
> +/*
> + * Wave6 series multi-standard codec IP - wave6 register definitions
> + *
> + * Copyright (C) 2025 CHIPS&MEDIA INC
> + */
2026
...
> +
> +#define W6_MAX_PIC_STRIDE (4096U * 4)
> +#define W6_PIC_STRIDE_ALIGNMENT 32
> +#define W6_FBC_BUF_ALIGNMENT 32
> +#define W6_DEC_BUF_ALIGNMENT 32
> +#define W6_DEF_DEC_PIC_WIDTH 720U
> +#define W6_DEF_DEC_PIC_HEIGHT 480U
> +#define W6_MIN_DEC_PIC_WIDTH 64U
> +#define W6_MIN_DEC_PIC_HEIGHT 64U
> +#define W6_MAX_DEC_PIC_WIDTH 4096U
> +#define W6_MAX_DEC_PIC_HEIGHT 4096U
> +#define W6_DEC_PIC_SIZE_STEP 1
> +
> +#define W6_DEF_ENC_PIC_WIDTH 416U
> +#define W6_DEF_ENC_PIC_HEIGHT 240U
> +#define W6_MIN_ENC_PIC_WIDTH 256U
> +#define W6_MIN_ENC_PIC_HEIGHT 128U
> +#define W6_MAX_ENC_PIC_WIDTH 4096U
> +#define W6_MAX_ENC_PIC_HEIGHT 4096U
needn't U
> +#define W6_ENC_PIC_SIZE_STEP 8
> +#define W6_ENC_CROP_X_POS_STEP 32
> +#define W6_ENC_CROP_Y_POS_STEP 2
> +#define W6_ENC_CROP_STEP 2
> +
> +#define W6_VPU_POLL_DELAY_US 10
> +#define W6_VPU_POLL_TIMEOUT 300000
> +#define W6_BOOT_WAIT_TIMEOUT 10000
> +#define W6_VPU_TIMEOUT 6000
> +#define W6_VPU_TIMEOUT_CYCLE_COUNT (8000000 * 4 * 4)
> +
...
> +#define __WAVE6_VPUERROR_H__
> +
> +/* WAVE6 COMMON SYSTEM ERROR (FAIL_REASON) */
> +#define WAVE6_SYSERR_QUEUEING_FAIL 0x00000001
> +#define WAVE6_SYSERR_DECODER_FUSE 0x00000002
> +#define WAVE6_SYSERR_INSTRUCTION_ACCESS_VIOLATION 0x00000004
> +#define WAVE6_SYSERR_PRIVILEGE_VIOLATION 0x00000008
> +#define WAVE6_SYSERR_DATA_ADDR_ALIGNMENT 0x00000010
> +#define WAVE6_SYSERR_DATA_ACCESS_VIOLATION 0x00000020
> +#define WAVE6_SYSERR_ACCESS_VIOLATION_HW 0x00000040
> +#define WAVE6_SYSERR_INSTRUCTION_ADDR_ALIGNMENT 0x00000080
> +#define WAVE6_SYSERR_UNKNOWN 0x00000100
> +#define WAVE6_SYSERR_BUS_ERROR 0x00000200
> +#define WAVE6_SYSERR_DOUBLE_FAULT 0x00000400
> +#define WAVE6_SYSERR_RESULT_NOT_READY 0x00000800
> +#define WAVE6_SYSERR_VPU_STILL_RUNNING 0x00001000
> +#define WAVE6_SYSERR_UNKNOWN_CMD 0x00002000
> +#define WAVE6_SYSERR_UNKNOWN_CODEC_STD 0x00004000
> +#define WAVE6_SYSERR_UNKNOWN_QUERY_OPTION 0x00008000
> +#define WAVE6_SYSERR_WATCHDOG_TIMEOUT 0x00020000
> +#define WAVE6_SYSERR_NOT_SUPPORT 0x00100000
> +#define WAVE6_SYSERR_TEMP_SEC_BUF_OVERFLOW 0x00200000
> +#define WAVE6_SYSERR_NOT_SUPPORT_PROFILE 0x00400000
> +#define WAVE6_SYSERR_TIMEOUT_CODEC_FW 0x40000000
Suppose you should get check_patch warning, to prefer use BIT(n) for this
defination.
Frank
> +#define WAVE6_SYSERR_FATAL_VPU_HANGUP 0xf0000000
> +
> +/* WAVE6 COMMAND QUEUE ERROR (FAIL_REASON) */
> +#define WAVE6_CMDQ_ERR_NOT_QUEABLE_CMD 0x00000001
> +#define WAVE6_CMDQ_ERR_SKIP_MODE_ENABLE 0x00000002
> +#define WAVE6_CMDQ_ERR_INST_FLUSHING 0x00000003
> +#define WAVE6_CMDQ_ERR_INST_INACTIVE 0x00000004
> +#define WAVE6_CMDQ_ERR_QUEUE_FAIL 0x00000005
> +#define WAVE6_CMDQ_ERR_CMD_BUF_FULL 0x00000006
> +
> +/* WAVE6 ERROR ON DECODER (ERR_INFO) */
> +#define HEVC_SPSERR_SEQ_PARAMETER_SET_ID 0x00001000
> +#define HEVC_SPSERR_CHROMA_FORMAT_IDC 0x00001001
> +#define HEVC_SPSERR_PIC_WIDTH_IN_LUMA_SAMPLES 0x00001002
> +#define HEVC_SPSERR_PIC_HEIGHT_IN_LUMA_SAMPLES 0x00001003
> +#define HEVC_SPSERR_CONF_WIN_LEFT_OFFSET 0x00001004
> +#define HEVC_SPSERR_CONF_WIN_RIGHT_OFFSET 0x00001005
> +#define HEVC_SPSERR_CONF_WIN_TOP_OFFSET 0x00001006
> +#define HEVC_SPSERR_CONF_WIN_BOTTOM_OFFSET 0x00001007
> +#define HEVC_SPSERR_BIT_DEPTH_LUMA_MINUS8 0x00001008
> +#define HEVC_SPSERR_BIT_DEPTH_CHROMA_MINUS8 0x00001009
> +#define HEVC_SPSERR_LOG2_MAX_PIC_ORDER_CNT_LSB_MINUS4 0x0000100A
> +#define HEVC_SPSERR_SPS_MAX_DEC_PIC_BUFFERING 0x0000100B
> +#define HEVC_SPSERR_SPS_MAX_NUM_REORDER_PICS 0x0000100C
> +#define HEVC_SPSERR_SPS_MAX_LATENCY_INCREASE 0x0000100D
> +#define HEVC_SPSERR_LOG2_MIN_LUMA_CODING_BLOCK_SIZE_MINUS3 0x0000100E
> +#define HEVC_SPSERR_LOG2_DIFF_MAX_MIN_LUMA_CODING_BLOCK_SIZE 0x0000100F
> +#define HEVC_SPSERR_LOG2_MIN_TRANSFORM_BLOCK_SIZE_MINUS2 0x00001010
> +#define HEVC_SPSERR_LOG2_DIFF_MAX_MIN_TRANSFORM_BLOCK_SIZE 0x00001011
> +#define HEVC_SPSERR_MAX_TRANSFORM_HIERARCHY_DEPTH_INTER 0x00001012
> +#define HEVC_SPSERR_MAX_TRANSFORM_HIERARCHY_DEPTH_INTRA 0x00001013
> +#define HEVC_SPSERR_SCALING_LIST 0x00001014
> +#define HEVC_SPSERR_LOG2_DIFF_MIN_PCM_LUMA_CODING_BLOCK_SIZE_MINUS3 0x00001015
> +#define HEVC_SPSERR_LOG2_DIFF_MAX_MIN_PCM_LUMA_CODING_BLOCK_SIZE 0x00001016
> +#define HEVC_SPSERR_NUM_SHORTTERM_REF_PIC_SETS 0x00001017
> +#define HEVC_SPSERR_NUM_LONGTERM_REF_PICS_SPS 0x00001018
> +#define HEVC_SPSERR_GBU_PARSING_ERROR 0x00001019
> +#define HEVC_SPSERR_EXTENSION_FLAG 0x0000101A
> +#define HEVC_SPSERR_VUI_ERROR 0x0000101B
> +#define HEVC_SPSERR_ACTIVATE_SPS 0x0000101C
> +#define HEVC_SPSERR_PROFILE_SPACE 0x0000101D
> +#define HEVC_PPSERR_PPS_PIC_PARAMETER_SET_ID 0x00002000
> +#define HEVC_PPSERR_PPS_SEQ_PARAMETER_SET_ID 0x00002001
> +#define HEVC_PPSERR_NUM_REF_IDX_L0_DEFAULT_ACTIVE_MINUS1 0x00002002
> +#define HEVC_PPSERR_NUM_REF_IDX_L1_DEFAULT_ACTIVE_MINUS1 0x00002003
> +#define HEVC_PPSERR_INIT_QP_MINUS26 0x00002004
> +#define HEVC_PPSERR_DIFF_CU_QP_DELTA_DEPTH 0x00002005
> +#define HEVC_PPSERR_PPS_CB_QP_OFFSET 0x00002006
> +#define HEVC_PPSERR_PPS_CR_QP_OFFSET 0x00002007
> +#define HEVC_PPSERR_NUM_TILE_COLUMNS_MINUS1 0x00002008
> +#define HEVC_PPSERR_NUM_TILE_ROWS_MINUS1 0x00002009
> +#define HEVC_PPSERR_COLUMN_WIDTH_MINUS1 0x0000200A
> +#define HEVC_PPSERR_ROW_HEIGHT_MINUS1 0x0000200B
> +#define HEVC_PPSERR_PPS_BETA_OFFSET_DIV2 0x0000200C
> +#define HEVC_PPSERR_PPS_TC_OFFSET_DIV2 0x0000200D
> +#define HEVC_PPSERR_SCALING_LIST 0x0000200E
> +#define HEVC_PPSERR_LOG2_PARALLEL_MERGE_LEVEL_MINUS2 0x0000200F
> +#define HEVC_PPSERR_NUM_TILE_COLUMNS_RANGE_OUT 0x00002010
> +#define HEVC_PPSERR_NUM_TILE_ROWS_RANGE_OUT 0x00002011
> +#define HEVC_PPSERR_MORE_RBSP_DATA_ERROR 0x00002012
> +#define HEVC_PPSERR_PPS_PIC_PARAMETER_SET_ID_RANGE_OUT 0x00002013
> +#define HEVC_PPSERR_PPS_SEQ_PARAMETER_SET_ID_RANGE_OUT 0x00002014
> +#define HEVC_PPSERR_NUM_REF_IDX_L0_DEFAULT_ACTIVE_MINUS1_RANGE_OUT 0x00002015
> +#define HEVC_PPSERR_NUM_REF_IDX_L1_DEFAULT_ACTIVE_MINUS1_RANGE_OUT 0x00002016
> +#define HEVC_PPSERR_PPS_CB_QP_OFFSET_RANGE_OUT 0x00002017
> +#define HEVC_PPSERR_PPS_CR_QP_OFFSET_RANGE_OUT 0x00002018
> +#define HEVC_PPSERR_COLUMN_WIDTH_MINUS1_RANGE_OUT 0x00002019
> +#define HEVC_PPSERR_ROW_HEIGHT_MINUS1_RANGE_OUT 0x00002020
> +#define HEVC_PPSERR_PPS_BETA_OFFSET_DIV2_RANGE_OUT 0x00002021
> +#define HEVC_PPSERR_PPS_TC_OFFSET_DIV2_RANGE_OUT 0x00002022
> +#define HEVC_SHERR_SLICE_PIC_PARAMETER_SET_ID 0x00003000
> +#define HEVC_SHERR_ACTIVATE_PPS 0x00003001
> +#define HEVC_SHERR_ACTIVATE_SPS 0x00003002
> +#define HEVC_SHERR_SLICE_TYPE 0x00003003
> +#define HEVC_SHERR_FIRST_SLICE_IS_DEPENDENT_SLICE 0x00003004
> +#define HEVC_SHERR_SHORTTERM_REF_PIC_SET_SPS_FLAG 0x00003005
> +#define HEVC_SHERR_SHORTTERM_REF_PIC_SET 0x00003006
> +#define HEVC_SHERR_SHORTTERM_REF_PIC_SET_IDX 0x00003007
> +#define HEVC_SHERR_NUM_LONGTERM_SPS 0x00003008
> +#define HEVC_SHERR_NUM_LONGTERM_PICS 0x00003009
> +#define HEVC_SHERR_LT_IDX_SPS_IS_OUT_OF_RANGE 0x0000300A
> +#define HEVC_SHERR_DELTA_POC_MSB_CYCLE_LT 0x0000300B
> +#define HEVC_SHERR_NUM_REF_IDX_L0_ACTIVE_MINUS1 0x0000300C
> +#define HEVC_SHERR_NUM_REF_IDX_L1_ACTIVE_MINUS1 0x0000300D
> +#define HEVC_SHERR_COLLOCATED_REF_IDX 0x0000300E
> +#define HEVC_SHERR_PRED_WEIGHT_TABLE 0x0000300F
> +#define HEVC_SHERR_FIVE_MINUS_MAX_NUM_MERGE_CAND 0x00003010
> +#define HEVC_SHERR_SLICE_QP_DELTA 0x00003011
> +#define HEVC_SHERR_SLICE_QP_DELTA_IS_OUT_OF_RANGE 0x00003012
> +#define HEVC_SHERR_SLICE_CB_QP_OFFSET 0x00003013
> +#define HEVC_SHERR_SLICE_CR_QP_OFFSET 0x00003014
> +#define HEVC_SHERR_SLICE_BETA_OFFSET_DIV2 0x00003015
> +#define HEVC_SHERR_SLICE_TC_OFFSET_DIV2 0x00003016
> +#define HEVC_SHERR_NUM_ENTRY_POINT_OFFSETS 0x00003017
> +#define HEVC_SHERR_OFFSET_LEN_MINUS1 0x00003018
> +#define HEVC_SHERR_SLICE_SEGMENT_HEADER_EXTENSION_LENGTH 0x00003019
> +#define HEVC_SHERR_WRONG_POC_IN_STILL_PICTURE_PROFILE 0x0000301A
> +#define HEVC_SHERR_SLICE_TYPE_ERROR_IN_STILL_PICTURE_PROFILE 0x0000301B
> +#define HEVC_SHERR_PPS_ID_NOT_EQUAL_PREV_VALUE 0x0000301C
> +#define HEVC_SPECERR_OVER_PICTURE_WIDTH_SIZE 0x00004000
> +#define HEVC_SPECERR_OVER_PICTURE_HEIGHT_SIZE 0x00004001
> +#define HEVC_SPECERR_OVER_CHROMA_FORMAT 0x00004002
> +#define HEVC_SPECERR_OVER_BIT_DEPTH 0x00004003
> +#define HEVC_SPECERR_OVER_BUFFER_OVER_FLOW 0x00004004
> +#define HEVC_SPECERR_OVER_WRONG_BUFFER_ACCESS 0x00004005
> +#define HEVC_ETCERR_INIT_SEQ_SPS_NOT_FOUND 0x00005000
> +#define HEVC_ETCERR_DEC_PIC_VCL_NOT_FOUND 0x00005001
> +#define HEVC_ETCERR_NO_VALID_SLICE_IN_AU 0x00005002
> +#define HEVC_ETCERR_INPLACE_V 0x0000500F
> +
> +#define AVC_SPSERR_SEQ_PARAMETER_SET_ID 0x00001000
> +#define AVC_SPSERR_CHROMA_FORMAT_IDC 0x00001001
> +#define AVC_SPSERR_PIC_WIDTH_IN_LUMA_SAMPLES 0x00001002
> +#define AVC_SPSERR_PIC_HEIGHT_IN_LUMA_SAMPLES 0x00001003
> +#define AVC_SPSERR_CONF_WIN_LEFT_OFFSET 0x00001004
> +#define AVC_SPSERR_CONF_WIN_RIGHT_OFFSET 0x00001005
> +#define AVC_SPSERR_CONF_WIN_TOP_OFFSET 0x00001006
> +#define AVC_SPSERR_CONF_WIN_BOTTOM_OFFSET 0x00001007
> +#define AVC_SPSERR_BIT_DEPTH_LUMA_MINUS8 0x00001008
> +#define AVC_SPSERR_BIT_DEPTH_CHROMA_MINUS8 0x00001009
> +#define AVC_SPSERR_SPS_MAX_DEC_PIC_BUFFERING 0x0000100B
> +#define AVC_SPSERR_SPS_MAX_NUM_REORDER_PICS 0x0000100C
> +#define AVC_SPSERR_SCALING_LIST 0x00001014
> +#define AVC_SPSERR_GBU_PARSING_ERROR 0x00001019
> +#define AVC_SPSERR_VUI_ERROR 0x0000101B
> +#define AVC_SPSERR_ACTIVATE_SPS 0x0000101C
> +#define AVC_PPSERR_PPS_PIC_PARAMETER_SET_ID 0x00002000
> +#define AVC_PPSERR_PPS_SEQ_PARAMETER_SET_ID 0x00002001
> +#define AVC_PPSERR_NUM_REF_IDX_L0_DEFAULT_ACTIVE_MINUS1 0x00002002
> +#define AVC_PPSERR_NUM_REF_IDX_L1_DEFAULT_ACTIVE_MINUS1 0x00002003
> +#define AVC_PPSERR_INIT_QP_MINUS26 0x00002004
> +#define AVC_PPSERR_PPS_CB_QP_OFFSET 0x00002006
> +#define AVC_PPSERR_PPS_CR_QP_OFFSET 0x00002007
> +#define AVC_PPSERR_SCALING_LIST 0x0000200E
> +#define AVC_PPSERR_MORE_RBSP_DATA_ERROR 0x00002012
> +#define AVC_PPSERR_PPS_PIC_PARAMETER_SET_ID_RANGE_OUT 0x00002013
> +#define AVC_PPSERR_PPS_SEQ_PARAMETER_SET_ID_RANGE_OUT 0x00002014
> +#define AVC_PPSERR_NUM_REF_IDX_L0_DEFAULT_ACTIVE_MINUS1_RANGE_OUT 0x00002015
> +#define AVC_PPSERR_NUM_REF_IDX_L1_DEFAULT_ACTIVE_MINUS1_RANGE_OUT 0x00002016
> +#define AVC_PPSERR_PPS_CB_QP_OFFSET_RANGE_OUT 0x00002017
> +#define AVC_PPSERR_PPS_CR_QP_OFFSET_RANGE_OUT 0x00002018
> +#define AVC_SHERR_SLICE_PIC_PARAMETER_SET_ID 0x00003000
> +#define AVC_SHERR_ACTIVATE_PPS 0x00003001
> +#define AVC_SHERR_ACTIVATE_SPS 0x00003002
> +#define AVC_SHERR_SLICE_TYPE 0x00003003
> +#define AVC_SHERR_FIRST_MB_IN_SLICE 0x00003004
> +#define AVC_SHERR_RPLM 0x00003006
> +#define AVC_SHERR_LT_IDX_SPS_IS_OUT_OF_RANGE 0x0000300A
> +#define AVC_SHERR_NUM_REF_IDX_L0_ACTIVE_MINUS1 0x0000300C
> +#define AVC_SHERR_NUM_REF_IDX_L1_ACTIVE_MINUS1 0x0000300D
> +#define AVC_SHERR_PRED_WEIGHT_TABLE 0x0000300F
> +#define AVC_SHERR_SLICE_QP_DELTA 0x00003011
> +#define AVC_SHERR_SLICE_BETA_OFFSET_DIV2 0x00003015
> +#define AVC_SHERR_SLICE_TC_OFFSET_DIV2 0x00003016
> +#define AVC_SHERR_DISABLE_DEBLOCK_FILTER_IDC 0x00003017
> +#define AVC_SPECERR_OVER_PICTURE_WIDTH_SIZE 0x00004000
> +#define AVC_SPECERR_OVER_PICTURE_HEIGHT_SIZE 0x00004001
> +#define AVC_SPECERR_OVER_CHROMA_FORMAT 0x00004002
> +#define AVC_SPECERR_OVER_BIT_DEPTH 0x00004003
> +#define AVC_SPECERR_OVER_BUFFER_OVER_FLOW 0x00004004
> +#define AVC_SPECERR_OVER_WRONG_BUFFER_ACCESS 0x00004005
> +#define AVC_ETCERR_INIT_SEQ_SPS_NOT_FOUND 0x00005000
> +#define AVC_ETCERR_DEC_PIC_VCL_NOT_FOUND 0x00005001
> +#define AVC_ETCERR_NO_VALID_SLICE_IN_AU 0x00005002
> +#define AVC_ETCERR_ASO 0x00005004
> +#define AVC_ETCERR_FMO 0x00005005
> +#define AVC_ETCERR_INPLACE_V 0x0000500F
> +
> +/* WAVE6 WARNING ON DECODER (WARN_INFO) */
> +#define HEVC_SPSWARN_MAX_SUB_LAYERS_MINUS1 0x00000001
> +#define HEVC_SPSWARN_GENERAL_RESERVED_ZERO_44BITS 0x00000002
> +#define HEVC_SPSWARN_RESERVED_ZERO_2BITS 0x00000004
> +#define HEVC_SPSWARN_SUB_LAYER_RESERVED_ZERO_44BITS 0x00000008
> +#define HEVC_SPSWARN_GENERAL_LEVEL_IDC 0x00000010
> +#define HEVC_SPSWARN_SPS_MAX_DEC_PIC_BUFFERING_VALUE_OVER 0x00000020
> +#define HEVC_SPSWARN_RBSP_TRAILING_BITS 0x00000040
> +#define HEVC_SPSWARN_ST_RPS_UE_ERROR 0x00000080
> +#define HEVC_SPSWARN_EXTENSION_FLAG 0x01000000
> +#define HEVC_SPSWARN_REPLACED_WITH_PREV_SPS 0x02000000
> +#define HEVC_PPSWARN_RBSP_TRAILING_BITS 0x00000100
> +#define HEVC_PPSWARN_REPLACED_WITH_PREV_PPS 0x00000200
> +#define HEVC_SHWARN_FIRST_SLICE_SEGMENT_IN_PIC_FLAG 0x00001000
> +#define HEVC_SHWARN_NO_OUTPUT_OF_PRIOR_PICS_FLAG 0x00002000
> +#define HEVC_SHWARN_PIC_OUTPUT_FLAG 0x00004000
> +#define HEVC_SHWARN_DUPLICATED_SLICE_SEGMENT 0x00008000
> +#define HEVC_ETCWARN_INIT_SEQ_VCL_NOT_FOUND 0x00010000
> +#define HEVC_ETCWARN_MISSING_REFERENCE_PICTURE 0x00020000
> +#define HEVC_ETCWARN_WRONG_TEMPORAL_ID 0x00040000
> +#define HEVC_ETCWARN_ERROR_PICTURE_IS_REFERENCED 0x00080000
> +#define HEVC_SPECWARN_OVER_PROFILE 0x00100000
> +#define HEVC_SPECWARN_OVER_LEVEL 0x00200000
> +#define HEVC_PRESWARN_PARSING_ERR 0x04000000
> +#define HEVC_PRESWARN_MVD_OUT_OF_RANGE 0x08000000
> +#define HEVC_PRESWARN_CU_QP_DELTA_VAL_OUT_OF_RANGE 0x09000000
> +#define HEVC_PRESWARN_COEFF_LEVEL_REMAINING_OUT_OF_RANGE 0x0A000000
> +#define HEVC_PRESWARN_PCM_ERR 0x0B000000
> +#define HEVC_PRESWARN_OVERCONSUME 0x0C000000
> +#define HEVC_PRESWARN_END_OF_SUBSET_ONE_BIT_ERR 0x10000000
> +#define HEVC_PRESWARN_END_OF_SLICE_SEGMENT_FLAG 0x20000000
> +
> +#define AVC_SPSWARN_RESERVED_ZERO_2BITS 0x00000004
> +#define AVC_SPSWARN_GENERAL_LEVEL_IDC 0x00000010
> +#define AVC_SPSWARN_RBSP_TRAILING_BITS 0x00000040
> +#define AVC_PPSWARN_RBSP_TRAILING_BITS 0x00000100
> +#define AVC_SHWARN_NO_OUTPUT_OF_PRIOR_PICS_FLAG 0x00002000
> +#define AVC_ETCWARN_INIT_SEQ_VCL_NOT_FOUND 0x00010000
> +#define AVC_ETCWARN_MISSING_REFERENCE_PICTURE 0x00020000
> +#define AVC_ETCWARN_ERROR_PICTURE_IS_REFERENCED 0x00080000
> +#define AVC_SPECWARN_OVER_PROFILE 0x00100000
> +#define AVC_SPECWARN_OVER_LEVEL 0x00200000
> +#define AVC_PRESWARN_MVD_RANGE_OUT 0x00400000
> +#define AVC_PRESWARN_MB_QPD_RANGE_OUT 0x00500000
> +#define AVC_PRESWARN_COEFF_RANGE_OUT 0x00600000
> +#define AVC_PRESWARN_MV_RANGE_OUT 0x00700000
> +#define AVC_PRESWARN_MB_SKIP_RUN_RANGE_OUT 0x00800000
> +#define AVC_PRESWARN_MB_TYPE_RANGE_OUT 0x00900000
> +#define AVC_PRESWARN_SUB_MB_TYPE_RANGE_OUT 0x00A00000
> +#define AVC_PRESWARN_CBP_RANGE_OUT 0x00B00000
> +#define AVC_PRESWARN_INTRA_CHROMA_PRED_MODE_RANGE_OUT 0x00C00000
> +#define AVC_PRESWARN_REF_IDX_RANGE_OUT 0x00D00000
> +#define AVC_PRESWARN_COEFF_TOKEN_RANGE_OUT 0x00E00000
> +#define AVC_PRESWARN_TOTAL_ZERO_RANGE_OUT 0x00F00000
> +#define AVC_PRESWARN_RUN_BEFORE_RANGE_OUT 0x01000000
> +#define AVC_PRESWARN_OVERCONSUME 0x01100000
> +#define AVC_PRESWARN_MISSING_SLICE 0x01200000
> +
> +/* WAVE6 WARNING ON ENCODER (WARN_INFO) */
> +#define WAVE6_ETCWARN_FORCED_SPLIT_BY_CU8X8 0x00000001
> +
> +#endif /* __WAVE6_VPUERROR_H__ */
> --
> 2.31.1
>
More information about the linux-arm-kernel
mailing list