[PATCH 1/3] dt-bindings: rtc: Add Raspberry Pi 5 RTC binding
Krzysztof Kozlowski
krzk at kernel.org
Wed Sep 9 08:47:15 PDT 2026
On 09/09/2026 16:12, Sander Speetjens wrote:
> Add device tree bindings for the Raspberry Pi 5 RTC.
> Located in a custom DA9091 PMIC and accesed trough the firmware mailbox.
>
> Signed-off-by: Sander Speetjens <sander.speetjens at gmail.com>
> Assisted-by: Grok
Your tag is the last one.
> ---
> .../bindings/rtc/raspberrypi,rtc-rpi.yaml | 48 +++++++++++++++++++
> 1 file changed, 48 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/rtc/raspberrypi,rtc-rpi.yaml
>
> diff --git a/Documentation/devicetree/bindings/rtc/raspberrypi,rtc-rpi.yaml b/Documentation/devicetree/bindings/rtc/raspberrypi,rtc-rpi.yaml
> new file mode 100644
> index 000000000000..e9bade7f8c91
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/raspberrypi,rtc-rpi.yaml
> @@ -0,0 +1,48 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +
There is no blank line here.
Please instruct your Grok to follow existing sources, not come with
whatever it wants.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/raspberrypi,rtc-rpi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Raspberry Pi firmware RTC
> +
> +maintainers:
> + - Jonathan Bell <jonathan at raspberrypi.com>
> +
> +description: |
> + Raspberry Pi RTC from the DA9091 accessed through the Raspberry Pi firmware
> + property interface.
> +
> +properties:
> + compatible:
> + const: raspberrypi,rpi-rtc
> +
> + firmware:
There is no such generic property. You need vendor prefix. Wasn't this
already discussed for Rpi? I feel like every time contributors send
downstream DTS ignoring what was discussed upstream.
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to the Raspberry Pi firmware device.
You said nothing more than property name and type. Explain what for.
> +
> + trickle-charge-microvolt:
> + description:
> + RTC backup battery trickle-charge voltage. A value of 0 disables
> + trickle charging.
> + anyOf:
> + - const: 0
> + - minimum: 1300000
> + maximum: 4400000
> +
> +required:
> + - compatible
> + - firmware
> +
Missing ref to rtc.
Honestly, at this point you clearly did not take existing bindings at
your starting point.
> +additionalProperties: false
> +
> +examples:
> + - |
> + rtc {
> + compatible = "raspberrypi,rpi-rtc";
> + firmware = <&firmware>;
> + status = "okay";
Nope. Again, take existing bindings. This looks like LLM slop.
A nit, subject: drop second/last, redundant "bindings". The
"dt-bindings" prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v7.1-rc7/source/Documentation/devicetree/bindings/submitting-patches.rst#L23
> + trickle-charge-microvolt = <0>;
> + };
Best regards,
Krzysztof
More information about the linux-arm-kernel
mailing list