[PATCH v2 0/8] Add Aspeed AST2700 SDRAM EDAC support

[Andrew Jeffery]

On Tue, 2026-09-08 at 07:13 +0000, Ryan Chen wrote:
> 
> > Subject: Re: [PATCH v2 0/8] Add Aspeed AST2700 SDRAM EDAC support
> > 
> > On Mon, Aug 24, 2026 at 10:42:27AM +0800, Ryan Chen wrote:
> > > Add ECC error reporting for the Aspeed AST2700 SoC to the existing
> > > aspeed_edac driver.
> > > 
> > > The AST2700 memory controller keeps the same overall EDAC programming
> > > model as the earlier Aspeed BMC SoCs, but uses a different register
> > > layout, a split interrupt status/clear/mask scheme and DDR4/DDR5 memory.
> > > Rather than fork the driver, the existing code is first tidied and
> > > generalised, then the AST2700 is added as one more per-SoC variant.
> > > 
> > > Patches 2-5 are bug fixes and cleanups to the existing driver. Patches
> > > 6 and 7 rework the implementation to accommodate the AST2700. Patch 8
> > > adds the AST2700 support itself.
> > 
> > Sashiko has comments:
> > 
> > https://sashiko.dev/#/patchset/20260824-edac-v2-0-c8d8bb693586%40aspeed
> > tech.com
> > 
> > Please address them: if valid, fix them, if not, explain why they don't need to
> > be fixed.
> > 
> > Btw, I don't see Stefan reviewing this driver and his last mail on LKML is from
> > 2025 so it looks like we'll orphan this driver too.
> > 
> > Thx.
> > 
> > --
> > Regards/Gruss,
> >     Boris.
> > 
> > https://people.kernel.org/tglx/notes-about-netiquette
> 
> Hello Boris,
> 	Thanks your review.
> 
> I've already replied to both of Sashiko's findings on their respective
> threads:
> 6/8: https://sashiko.dev/#/message/TY2PPF5CB9A1BE61E82EEE55F3F725362CCF2AD2%40TY2PPF5CB9A1BE6.apcprd06.prod.outlook.com
> 8/8: https://sashiko.dev/#/message/TY2PPF5CB9A1BE62172BCC358347C4836CCF2AD2%40TY2PPF5CB9A1BE6.apcprd06.prod.outlook.com
> 
> Short version: neither needs a code change. On 8/8 the premise doesn't
> hold - u-boot masks every implemented DRAMC interrupt source
> (INT_MASK reads GENMASK(16, 0), bits 31:17 are not implemented), so no
> non-ECC source can raise the line and the spurious detector cannot
> kick in. 

I feel this is a fragile analysis given multiple components involved. I
think it would be easier and safer (both in terms of kernel behaviour
and guarding against change in u-boot behaviour) if we have the kernel
driver take complete ownership of the interrupt configuration.

Andrew