[PATCH rc] iommu/tegra241-cmdqv: Reset VCMDQ in tegra241_vcmdq_hw_init_user()

[Nicolin Chen]

The Enable bits in CMDQV/VINTF/VCMDQ_CONFIG registers do not actually reset
the HW registers. So, the driver explicitly clears all the registers when a
VINTF or VCMDQ is being initialized calling its hw_deinit() function.

However, a userspace VCMDQ is not properly reset, unlike an in-kernel VCMDQ
getting reset in tegra241_vcmdq_hw_init().

Meanwhile, tegra241_vintf_hw_init() calling tegra241_vintf_hw_deinit() will
not deinit any VCMDQ, since there is no userspace VCMDQ mapped to the VINTF
at that stage.

Then, this may result in dirty VCMDQ registers, which can fail the VM.

Like tegra241_vcmdq_hw_init(), reset a VCMDQ in tegra241_vcmdq_hw_init() to
fix this bug. This is required by a host kernel.

Fixes: 6717f26ab1e7 ("iommu/tegra241-cmdqv: Add user-space use support")
Cc: stable at vger.kernel.org
Reported-by: Bao Nguyen <ncqb at google.com>
Signed-off-by: Nicolin Chen <nicolinc at nvidia.com>
---
 drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c b/drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c
index be1aaaf8cd17..6c7329e62010 100644
--- a/drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c
+++ b/drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c
@@ -1076,6 +1076,9 @@ static int tegra241_vcmdq_hw_init_user(struct tegra241_vcmdq *vcmdq)
 {
 	char header[64];
 
+	/* Reset VCMDQ */
+	tegra241_vcmdq_hw_deinit(vcmdq);
+
 	/* Configure the vcmdq only; User space does the enabling */
 	writeq_relaxed(vcmdq->cmdq.q.q_base, REG_VCMDQ_PAGE1(vcmdq, BASE));
 
-- 
2.34.1