[PATCH v7 2/6] i2c: xiic: switch to devres managed APIs

Abdurrahman Hussain via B4 Relay devnull+abdurrahman.nexthop.ai at kernel.org
Thu Jan 29 13:43:14 PST 2026


From: Abdurrahman Hussain <abdurrahman at nexthop.ai>

Simplify the error code paths by switching to devres managed helper
functions.

Signed-off-by: Abdurrahman Hussain <abdurrahman at nexthop.ai>
---
 drivers/i2c/busses/i2c-xiic.c | 28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 912a94d4d080..a480cbb86d93 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -1462,7 +1462,10 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
 		 DRIVER_NAME " %s", pdev->name);
 
-	mutex_init(&i2c->lock);
+	ret = devm_mutex_init(dev, &i2c->lock);
+	if (ret)
+		return ret;
+
 	spin_lock_init(&i2c->atomic_lock);
 
 	if (is_of_node(dev->fwnode)) {
@@ -1475,8 +1478,9 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	i2c->dev = &pdev->dev;
 	pm_runtime_set_autosuspend_delay(i2c->dev, XIIC_PM_TIMEOUT);
 	pm_runtime_use_autosuspend(i2c->dev);
-	pm_runtime_set_active(i2c->dev);
-	pm_runtime_enable(i2c->dev);
+	ret = devm_pm_runtime_set_active_enabled(dev);
+	if (ret)
+		return ret;
 
 	/* SCL frequency configuration */
 	i2c->input_clk = clk_get_rate(i2c->clk);
@@ -1492,7 +1496,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 
 	if (ret < 0) {
 		dev_err_probe(&pdev->dev, ret, "Cannot claim IRQ\n");
-		goto err_pm_disable;
+		return ret;
 	}
 
 	i2c->singlemaster =
@@ -1511,16 +1515,14 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 		i2c->endianness = BIG;
 
 	ret = xiic_reinit(i2c);
-	if (ret < 0) {
-		dev_err_probe(&pdev->dev, ret, "Cannot xiic_reinit\n");
-		goto err_pm_disable;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot xiic_reinit\n");
 
 	/* add i2c adapter to i2c tree */
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret) {
 		xiic_deinit(i2c);
-		goto err_pm_disable;
+		return ret;
 	}
 
 	if (pdata) {
@@ -1532,12 +1534,6 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "mmio %08lx irq %d scl clock frequency %d\n",
 		(unsigned long)res->start, irq, i2c->i2c_clk);
 
-	return 0;
-
-err_pm_disable:
-	pm_runtime_disable(&pdev->dev);
-	pm_runtime_set_suspended(&pdev->dev);
-
 	return ret;
 }
 
@@ -1558,8 +1554,6 @@ static void xiic_i2c_remove(struct platform_device *pdev)
 		xiic_deinit(i2c);
 
 	pm_runtime_put_sync(i2c->dev);
-	pm_runtime_disable(&pdev->dev);
-	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 }
 

-- 
2.52.0





More information about the linux-arm-kernel mailing list