[PATCH net-next 0/8] Add support for Renesas RZ/G3L GBETH

[Biju Das]

Hi Geert,

Thanks for the feedback

> -----Original Message-----
> From: Geert Uytterhoeven <geert at linux-m68k.org>
> Sent: 28 January 2026 18:42
> Subject: Re: [PATCH net-next 0/8] Add support for Renesas RZ/G3L GBETH
> 
> Hi Biju,
> 
> On Wed, 28 Jan 2026 at 13:58, Biju <biju.das.au at gmail.com> wrote:
> > From: Biju Das <biju.das.jz at bp.renesas.com>
> >
> > The Renesas RZ/G3L GBETH IP uses Synopsys DesignWare MAC version 5.30
> > compared to other Renesas SoC such as RZ/V2H that use MAC version 5.20.
> >
> > The RZ/G3L GBETH requires an extra clock compared to RZ/G3E and has
> > pps interrupts. Document the Renesas RZ/G3L GBETH IP in bindings and
> > enable the Gigabit Ethernet Interface (GBETH0) populated on the RZ/G3L
> > SMARC EVK. The eth1, pincontrol definitions and hotplug support will
> > be added later.
> >
> > Biju Das (8):
> >   dt-bindings: net: renesas,rzv2h-gbeth: Document Renesas RZ/G3L SoC
> >   net: stmmac: dwmac-renesas-gbeth: Add support for RZ/G3L SoC
> >   clk: renesas: rzg2l: Drop a check in rzg3s_cpg_pll_clk_recalc_rate()
> >   clk: renesas: rzg2l: Add support for enabling PLLs
> >   clk: renesas: r8a08g046: Add support for PLL6 clk
> >   clk: renesas: r9a08g046: Add clock and reset signals for the GBETH IPs
> >   arm64: dts: renesas: r9a08g046: Add GBETH nodes
> >   arm64: dts: renesas: rzg3l-smarc-som: Enable eth0 (GBETH) interface
> 
> Thanks for your series!
> 
> Please don't include "net-next" tags in patches that are not meant to be applied to the net-next tree.

My bad, I will split net-next patches separate and send it as v2.

Cheers,
Biju