[PATCH v2 08/20] ARM: versatile: Remove IRQF_ONESHOT

[Sebastian Andrzej Siewior]

Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.

Revert adding IRQF_ONESHOT to irqflags.

Acked-by: Sudeep Holla <sudeep.holla at arm.com>
Acked-by: Linus Walleij <linusw at kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
---
Cc: Linus Walleij <linusw at kernel.org>
Cc: Liviu Dudau <liviu.dudau at arm.com>
Cc: Sudeep Holla <sudeep.holla at arm.com>
Cc: Lorenzo Pieralisi <lpieralisi at kernel.org>
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/mach-versatile/spc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-versatile/spc.c b/arch/arm/mach-versatile/spc.c
index 812db32448fcd..2d27777a00d33 100644
--- a/arch/arm/mach-versatile/spc.c
+++ b/arch/arm/mach-versatile/spc.c
@@ -459,8 +459,8 @@ int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid, int irq)
 
 	readl_relaxed(info->baseaddr + PWC_STATUS);
 
-	ret = request_irq(irq, ve_spc_irq_handler, IRQF_TRIGGER_HIGH
-				| IRQF_ONESHOT, "vexpress-spc", info);
+	ret = request_irq(irq, ve_spc_irq_handler, IRQF_TRIGGER_HIGH,
+			  "vexpress-spc", info);
 	if (ret) {
 		pr_err(SPCLOG "IRQ %d request failed\n", irq);
 		kfree(info);
-- 
2.51.0