[PATCH v3 01/27] media: dt-bindings: media: rockchip-rga: add rockchip,rk3588-rga3

[Rob Herring (Arm)]

On Tue, 27 Jan 2026 15:39:10 +0100, Sven Püschel wrote:
> Add a new compatible for the RGA3 (Raster Graphic Acceleration 3)
> peripheral found on the RK3588 SoC. Also specify an iommu property,
> as the RGA3 contains the generic rockchip iommu. The RGA2 also has
> an iommu, but it's specific to the RGA2.
> 
> The existing binding refers to the RGA2 peripheral. The RK3588
> contains one RGA2 core and two RGA3 cores. Both feature a similar
> functionality of scaling, cropping and rotating of up to two input
> images into one output image. Key differences of the RGA3 are:
> 
> - supports 10bit YUV output formats
> - supports 8x8 tiles and FBCD as inputs and outputs
> - supports BT2020 color space conversion
> - max output resolution of (8192-64)x(8192-64)
> - MMU can map up to 32G DDR RAM
> - fully planar formats (3 planes) are not supported
> - max scale up/down factor of 8 (RGA2 allows up to 16)
> 
> Signed-off-by: Sven Püschel <s.pueschel at pengutronix.de>
> ---
>  .../devicetree/bindings/media/rockchip-rga.yaml       | 19 ++++++++++++++++++-
>  1 file changed, 18 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/media/rockchip-rga.yaml:64:1: [warning] wrong indentation: expected 2 but found 0 (indentation)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260127-spu-rga3-v3-1-77b273067beb@pengutronix.de

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.